scholarly journals Regulation of the normalized rate of driven magnetic reconnection through shocked flux pileup

2021 ◽  
Vol 87 (3) ◽  
Author(s):  
Joseph Olson ◽  
Jan Egedal ◽  
Michael Clark ◽  
Douglass A. Endrizzi ◽  
Samuel Greess ◽  
...  
Keyword(s):  
Magnetic Reconnection ◽  
System Size ◽  
Force Balance ◽  
Absolute Rate ◽  
Reconnection Rate ◽  
Supersonic Plasma ◽  
Reconnection Layer ◽  
Inflow Conditions ◽  
Theoretical Results

Magnetic reconnection is explored on the Terrestrial Reconnection Experiment (TREX) for asymmetric inflow conditions and in a configuration where the absolute rate of reconnection is set by an external drive. Magnetic pileup enhances the upstream magnetic field of the high-density inflow, leading to an increased upstream Alfvén speed and helping to lower the normalized reconnection rate to values expected from theoretical consideration. In addition, a shock interface between the far upstream supersonic plasma inflow and the region of magnetic flux pileup is observed, important to the overall force balance of the system, thereby demonstrating the role of shock formation for configurations including a supersonically driven inflow. Despite the specialized geometry where a strong reconnection drive is applied from only one side of the reconnection layer, previous numerical and theoretical results remain robust and are shown to accurately predict the normalized rate of reconnection for the range of system sizes considered. This experimental rate of reconnection is dependent on system size, reaching values as high as 0.8 at the smallest normalized system size applied.

scholarly journals On the role of system size in Hall MHD magnetic reconnection

2018 ◽  
Vol 25 (2) ◽  
pp. 022103 ◽  
Author(s):  
C. Bard ◽  
J. C. Dorelli
Keyword(s):  
Magnetic Reconnection ◽  
System Size ◽  
Hall Mhd

Energetics of compressible models of fast steady-state magnetic reconnection

1990 ◽  
Vol 43 (1) ◽  
pp. 141-150 ◽  
Author(s):  
M. Jardine ◽  
E. R. Priest
Keyword(s):  
Mach Number ◽  
Magnetic Reconnection ◽  
Magnetic Energy ◽  
Dominant Factor ◽  
Reconnection Rate ◽  
Pile Up ◽  
Fundamental Process ◽  
Two Factors ◽  
Factor Governing

An understanding of the energy transfer that takes place during magnetic reconnection is crucial to the study of this fundamental process. It depends on two factors: the type of reconnection regime (which is determined by the boundary conditions) and the degree of compressibility. Here we examine the role of compressibility in the energetics of a family of reconnection models. When the inflow Mach number (or reconnection rate) Me is small the effects of compressibility may be more important than the differences between regimes. We find that for a slow-compression regime with Me = 0·005 compressibility decreases by 39% the efficiency of the shocks in converting magnetic energy and increases by 14% the ratio of thermal to kinetic energy in the outflow jet. This compares with a 13% decrease in the shock efficiency and a 7% decrease in the jet ratio obtained by choosing instead a flux-pile-up regime. As Me is increased, however, the differences between regimes become larger and may be comparable to or greater than the effects of compressibility. Thus when the above Mach number is doubled we find that a change of regime now has 1–6 times the effect on the jet energy ratio as the introduction of compressibility. For those regimes, therefore, which only exist at low inflow Mach numbers, compressibility will always be important. At higher values of Me the type of regime may be the dominant factor governing the energetics.

Clustering-Triggered Efficient Room Temperature Phosphorescence from Nonconventional Luminophores

2019 ◽  
Author(s):  
Shuyuan Zheng ◽  
Taiping Hu ◽  
Xin Bin ◽  
Yunzhong Wang ◽  
Yuanping Yi ◽  
...  
Keyword(s):  
Room Temperature ◽  
High Efficiency ◽  
Spin Orbit Coupling ◽  
Design Rationale ◽  
Emission Mechanism ◽  
Room Temperature Phosphorescence ◽  
Electronic Interactions ◽  
Energy Gaps ◽  
Theoretical Results

Pure organic room temperature phosphorescence (RTP) and luminescence from nonconventional luminophores have gained increasing attention. However, it remains challenging to achieve efficient RTP from unorthodox luminophores, on account of the unsophisticated understanding of the emission mechanism. Here we propose a strategy to realize efficient RTP in nonconventional luminophores through incorporation of lone pairs together with clustering and effective electronic interactions. The former promotes spin-orbit coupling and boost the consequent intersystem crossing, whereas the latter narrows energy gaps and stabilizes the triplets, thus synergistically affording remarkable RTP. Experimental and theoretical results of urea and its derivatives verify the design rationale. Remarkably, RTP from thiourea solids with unprecedentedly high efficiency of up to 24.5% is obtained. Further control experiments testify the crucial role of through-space delocalization on the emission. These results would spur the future fabrication of nonconventional phosphors, and moreover should advance understanding of the underlying emission mechanism.<br>

Flux Rope Acceleration and Enhanced Magnetic Reconnection Rate

2003 ◽  
Author(s):  
C.Z. Cheng ◽  
Y. Ren ◽  
G.S. Choe ◽  
Y.-J. Moon
Keyword(s):  
Magnetic Reconnection ◽  
Flux Rope ◽  
Reconnection Rate

scholarly journals Selecting a Model for Forecasting

Econometrics ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 26
Author(s):  
Jennifer L. Castle ◽  
Jurgen A. Doornik ◽  
David F. Hendry
Keyword(s):  
Structural Breaks ◽  
Simulation Experiment ◽  
Structural Break ◽  
Static Model ◽  
Forecast Period ◽  
Forecast Performance ◽  
Significance Level ◽  
Forecasting Models ◽  
Theoretical Results

We investigate forecasting in models that condition on variables for which future values are unknown. We consider the role of the significance level because it guides the binary decisions whether to include or exclude variables. The analysis is extended by allowing for a structural break, either in the first forecast period or just before. Theoretical results are derived for a three-variable static model, but generalized to include dynamics and many more variables in the simulation experiment. The results show that the trade-off for selecting variables in forecasting models in a stationary world, namely that variables should be retained if their noncentralities exceed unity, still applies in settings with structural breaks. This provides support for model selection at looser than conventional settings, albeit with many additional features explaining the forecast performance, and with the caveat that retaining irrelevant variables that are subject to location shifts can worsen forecast performance.

scholarly journals The Role of Hyaluronic Acid in Cartilage Boundary Lubrication

Cells ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 1606 ◽  
Author(s):  
Weifeng Lin ◽  
Zhang Liu ◽  
Nir Kampf ◽  
Jacob Klein
Keyword(s):  
Hyaluronic Acid ◽  
Synovial Fluid ◽  
Surface Force ◽  
Force Balance ◽  
New Paradigm ◽  
Low Friction ◽  
Cartilage Surface ◽  
Boundary Lubricant ◽  
Lipid Layers

Hydration lubrication has emerged as a new paradigm for lubrication in aqueous and biological media, accounting especially for the extremely low friction (friction coefficients down to 0.001) of articular cartilage lubrication in joints. Among the ensemble of molecules acting in the joint, phosphatidylcholine (PC) lipids have been proposed as the key molecules forming, in a complex with other molecules including hyaluronic acid (HA), a robust layer on the outer surface of the cartilage. HA, ubiquitous in synovial joints, is not in itself a good boundary lubricant, but binds the PC lipids at the cartilage surface; these, in turn, massively reduce the friction via hydration lubrication at their exposed, highly hydrated phosphocholine headgroups. An important unresolved issue in this scenario is why the free HA molecules in the synovial fluid do not suppress the lubricity by adsorbing simultaneously to the opposing lipid layers, i.e., forming an adhesive, dissipative bridge between them, as they slide past each other during joint articulation. To address this question, we directly examined the friction between two hydrogenated soy PC (HSPC) lipid layers (in the form of liposomes) immersed in HA solution or two palmitoyl–oleoyl PC (POPC) lipid layers across HA–POPC solution using a surface force balance (SFB). The results show, clearly and surprisingly, that HA addition does not affect the outstanding lubrication provided by the PC lipid layers. A possible mechanism indicated by our data that may account for this is that multiple lipid layers form on each cartilage surface, so that the slip plane may move from the midplane between the opposing surfaces, which is bridged by the HA, to an HA-free interface within a multilayer, where hydration lubrication is freely active. Another possibility suggested by our model experiments is that lipids in synovial fluid may complex with HA, thereby inhibiting the HA molecules from adhering to the lipids on the cartilage surfaces.

The role of electron heat flux in guide-field magnetic reconnection

2004 ◽  
Vol 11 (12) ◽  
pp. 5387-5397 ◽  
Author(s):  
Michael Hesse ◽  
Masha Kuznetsova ◽  
Joachim Birn
Keyword(s):  
Heat Flux ◽  
Magnetic Reconnection ◽  
Guide Field ◽  
Electron Heat

scholarly journals The role of guide field in magnetic reconnection driven by island coalescence

2017 ◽  
Vol 24 (2) ◽  
pp. 022124 ◽  
Author(s):  
A. Stanier ◽  
W. Daughton ◽  
Andrei N. Simakov ◽  
L. Chacón ◽  
A. Le ◽  
...  
Keyword(s):  
Magnetic Reconnection ◽  
Guide Field ◽  
Island Coalescence

The essential role of magnetic reconnection in erupting prominences and CMEs

2000 ◽  
Vol 26 (3) ◽  
pp. 469-472 ◽  
Author(s):  
A.H. McAllister ◽  
S.F. Martin
Keyword(s):  
Magnetic Reconnection ◽  
Essential Role
Sign in / Sign up

Export Citation Format

Share Document