Since the lithium-ion conductor Li[Formula: see text]GeP2S[Formula: see text] (LGPS) with a super high room-temperature conductivity of 12[Formula: see text]mS/cm was first reported in 2011, sulfide-type solid electrolytes have been paid much attention. It was suggested by Kwon et al. [J. Mater. Chem. A 3, 438 (2015)] that some excess lithium ions in LGPS, namely, Li[Formula: see text]Ge[Formula: see text] P[Formula: see text]S[Formula: see text], could further improve their ionic conductivities, and the highest conductivity of 14.2[Formula: see text]mS/cm was obtained at [Formula: see text] though a larger lattice parameter that occurred at [Formula: see text]. In this study, we focus on these two different chemical compositions of LGPS with [Formula: see text] and [Formula: see text], respectively. Both samples were prepared using the same experimental process. Their lattice parameter, microstructure and room-temperature ionic conductivity were compared in detail. The results show that the main phase is the tetragonal LGPS phase but with a nearly identical amount of orthorhombic LGPS phase coexisting in both samples. Bigger lattice parameters, larger grain sizes and higher ionic conductivities are simultaneously achieved in Li[Formula: see text]Ge[Formula: see text]P[Formula: see text]S[Formula: see text] ([Formula: see text]), exhibiting an ultrahigh room-temperature ionic conductivity of 18.8[Formula: see text]mS/cm.