AbstractA nanocomposite was fabricated during the research undertaken, consisting of multiwalled carbon nanotubes coated with rhodium nanoparticles by the new high-temperature method being the subject of the patent claim. High quality multiwalled carbon nanotubes (MWCNTs) with the length of 100÷500 nm and the diameter of 8÷20 nm obtained in advance with Catalytic Chemical Vapour Deposition (CVD) were employed in the investigations. The nanotubes manufactured under the own research contain small amounts of metallic impurities and amorphous carbon deposits. Multiwalled carbon nanotubes functionalisation in acids was applied to deposit rhodium nanoparticles onto the surface of carbon nanotubes, and then the material was placed in a solution being a precursor of rhodium nanoparticles. The material prepared was next placed in a quartz vessel and subjected to high-temperature reduction in the atmosphere of argon to deposit rhodium nanoparticles onto the surface of multiwalled carbon nanotubes. The following examinations were performed, respectively: MWCNTs fabrication, fabrication of a CNT-NPs (Carbon NanoTube-NanoParticles) nanocomposite material; the characterisation of the materials produced including examination of the structure and morphology, and the assessment of rhodium nanoparticles distribution on the surface of carbon nanotubes. Micro- and spectroscopy techniques were employed to characterise the structure of the nanocomposites obtained.
CVD Synthesis, Functionalization and CO2 Adsorption Attributes of Multiwalled Carbon Nanotubes