To clarify the mechanics of alveolar parenchyma, we undertook a stereological and topological study in perfusion-fixed canine lungs of the borders of alveolar septa. We defined the principal borders as those along which one septum 1) joins two others (J), 2) joins one other at a distinct angle (B), or 3) joins no other structure (E). E and B borders are invariably reinforced with heavy connective tissue cables; J borders are not. Relative net lengths, determined from the number of traces per section area, were J, 45%; E, 19%; and B, 25%. These were remarkably constant over 10 canine lobes (5 animals, 4 volumes). Parenchyma, then, departs from the simple models that comprise only Js and Es. Bs are important; their net length exceeds that of Es. With lobe deflation, E shortened somewhat more than required to maintain geometric similarity, suggesting that the alveolar duct contracted disproportionately. A three-dimensional reconstruction was made from serial sections, and individual border segments were followed through the reconstruction. Typical lengths of individual J, B, and E borders were nearly equal. To characterize how the network of borders were interconnected, we counted the nodes at which they meet by class, e.g., EBE for the meeting of one B, two Es. The most common are JJJJ, 26%; EEEJ, 10%; EBJ, 24%; EBE, 8%; BBJJ, 12%. If parenchyma were constructed only from free-standing entrance rings and septal junctions, only JJJJ and EEEJ would be anticipated. The presence of EBJ, EBE, and BBJJ underscores parenchymal complexity. Only 7% of septa examined were bordered entirely by Js. Connective tissue cables were not confined to the alveolar duct's lumen but often extended to the primary septa at the periphery of the ductal unit. They rarely linked adjacent alveolar ducts; only 1 in 200 cable segments crossed from one duct to another. These observations support the concept that the parenchyma is an elastic network, characterized in part by a serial mechanical linkage from connective tissue cable to septal membrane to cable again.
Stereolithography-Derived Three-Dimensional Pyrolytic Carbon/Mn3O4 Nanostructures for Free-Standing Hybrid Supercapacitor Electrodes
