We present the characterization of organic polyolefin and thermoplastic membranes for the enhancement of the selectivity of metal oxide (MOX) gas sensors. The experimental study is done based on theoretical considerations of the membrane characteristics. Through a broad screening of dense symmetric homo- and copolymers with different functional groups, the intrinsic properties such as the mobility or the transport of gases through the matrix were examined in detail. A subset of application-relevant gases was chosen for the experimental part of the study: H2, CH4, CO, CO2, NO2, ethanol, acetone, acetaldehyde, and water vapor. The gases have similar kinetic diameters and are therefore difficult to separate but have different functional groups and polarity. The concentration of the gases was based on the international indicative limit values (TWA, STEL). From the results, a simple relationship was to be found to estimate the permeability of various polar and nonpolar gases through gas permeation (GP) membranes. We used a broadband metal oxide gas sensor with a sensitive layer made of tin oxide with palladium catalyst (SnO2:Pd). Our aim was to develop a low-cost symmetrical dense polymer membrane to selectively detect gases with a MOX sensor.
Sensitive and Low-Power Metal Oxide Gas Sensors with a Low-Cost Microelectromechanical Heater
