Evaluation of fly ash collection methods for short-term bioassay studies of fluidized-bed coal combustion

1984 ◽  
Vol 18 (10) ◽  
pp. 765-768 ◽  
Author(s):  
Judy Lee. Mumford ◽  
Joellen. Lewtas
1981 ◽  
Vol 7 (1) ◽  
pp. 117-124 ◽  
Author(s):  
Larry C. Griffis ◽  
M. Burton Snipes ◽  
Antone L. Brooks

1983 ◽  
Vol 17 (2) ◽  
pp. 65-71 ◽  
Author(s):  
Suzanne H. Weissman ◽  
Robert L. Carpenter ◽  
George J. Newton

2014 ◽  
Vol 1054 ◽  
pp. 148-153
Author(s):  
Tereza Otcovská ◽  
Pavel Padevět

Fly ash is a waste product produced during combustion of coal. There are two basic types of fly ash. According to the type of combustion, there is produces pulverised coal combustion (PCC) fly ash or fluidized bed combustion (FBC) fly ash. Use of fly ash additives influences moisture properties of binder gels (cement paste). The particular object of interest of this post is capillary action of water in the binder gels with different concentration of fly ash in the mixture. There are substantial differences among moisture properties of binder gels with FBC fly ash additives compared with the binder gels with PCC fly ash additives.


2016 ◽  
Vol 82 (12) ◽  
pp. 3493-3502 ◽  
Author(s):  
Myra C. Hughey ◽  
Jenifer B. Walke ◽  
Matthew H. Becker ◽  
Thomas P. Umile ◽  
Elizabeth A. Burzynski ◽  
...  

ABSTRACTDisruptions to the microbiome can impact host health as can exposure to environmental contaminants. However, few studies have addressed how environmental contaminants impact the microbiome. We explored this question for frogs that breed in wetlands contaminated with fly ash, a by-product of coal combustion that is enriched in trace elements. We found differences in the bacterial communities among a fly ash-contaminated site and several reference wetlands. We then experimentally assessed the impacts of fly ash on the skin microbiome of adult spring peepers (Pseudacris crucifer). Frogs were exposed to fly ash in the laboratory for 12 h, the duration of a typical breeding event, and the skin microbiome was assessed after 5 days (experiment 1) or after 5 and 15 days (experiment 2). We examined bacterial community structure using 16S rRNA gene amplicon sequencing and metabolite profiles using high-pressure liquid chromatography-mass spectrometry (HPLC-MS). We found little impact as the result of acute exposure to fly ash on the bacterial communities or metabolite profiles in either experiment, suggesting that the bacterial symbiont communities of adults may be relatively resistant to brief contaminant exposure. However, housing frogs in the laboratory altered bacterial community structure in the two experiments, which supports prior research suggesting that environmental source pools are important for maintaining the amphibian skin microbiome. Therefore, for contaminants like fly ash that may alter the potential source pool of symbionts, we think it may be important to explore how contaminants affect the initial assembly of the amphibian skin microbiome in larval amphibians that develop within contaminated sites.IMPORTANCEAnimals are hosts to many symbiotic microorganisms, collectively called the microbiome, that play critical roles in host health. Therefore, environmental contaminants that alter the microbiome may impact hosts. Some of the most widespread contaminants, produced worldwide, are derived from the mining, storage, and combustion of coal for energy. Fly ash, for example, is a by-product of coal combustion. It contains compounds such as arsenic, selenium, cadmium, and strontium and is a recognized source of ground and surface water contamination. Here, we experimentally investigated the impacts of short-term fly ash exposure on the skin microbiome of spring peepers, one of many species of amphibian that sometimes breed in open fly ash disposal ponds. This research provides a look into the potential impacts of fly ash on an animal's microbiome and suggests important future directions for research on the effects of environmental contaminants on the microbiome.


2019 ◽  
Vol 7 (1) ◽  
pp. 73
Author(s):  
Yuanda Wattimena ◽  
Asri Gani ◽  
Medyan Riza

Adsorpsi emisi pembakaran batubara dengan menggunakan adsorben zeolit pada jenis briket dan pulverized telah dilakukan. Penelitian ini bertujuan untuk mengurangi emisi gas SO2 dan logam Hg yang berbahaya apabila rilis di udara bebas dengan cara menggunakan adsorben zeolit untuk kecendrungan emisi menjadi bottom ash yang lebih terkendali. Pengujian ini fokus mengevaluasi rasio optimal rasio adsorben terhadap jumlah batubara terhadap performa penyerapan, sehingga penggunaannya tidak mengurangi nilai bakar batubara. Prosedur pembakaran ekspremintal awal dimulai dari pencampuran batubara dan zeolit dengan rasio 4%, 6%, 8%, 10%  dan 12%  yang dibagi dalam bentuk briket dan pulverized. Kedua jenis sampel dibakar secara berurutan pada electrical stainless steel reaction tube furnace pada kondisi temperatur pembakaran Fludized Bed Coal Combustion yaitu 600oC, 700oC, dan 800oC dengan laju alir udara disesuaikan. Flue gas hasil pembakaran yang keluar dari outlet dianalisa menggunakan Gas Combustion and Emission Analyzer (E4400, E-Instrument). Logam Hg yang yang diserap oleh zeolit pada Bottom Ash dianalisa menggunakan NIC Mercury SP Anlayzer. Hasil pengujian menunjukan kinerja zeolit terhadap kapasitas penyerapan logam Hg untuk pembakaran batubara pulverized pada temperatur pembakaran  600oC, 700oC dan 800oC masing-masing didapat pada angka 33,6, 19,25 dan 9,97 ppb/gr serta pada pembakaran briket batubara  masing-masing didapat sebesar 59,83, 37,8 dan 24,22 ppb/gr. Secara simultan untuk mengurangi emisi SO2 dan logam berat Hg pada fly ash untuk temperatur pembakaran Fludized Bed Coal Combustion rasio optimum berkisar antara 6%-8% adsoben zeolit dari jumlah massa batubara Kaway XVI Kabupaten Aceh Barat. Kata kunci:adsorpsi,  fluidized bed combustion, zeolit, briket, pulverized


2015 ◽  
Vol 31 (4) ◽  
pp. 139-150 ◽  
Author(s):  
Alicja Uliasz-Bocheńczyk ◽  
Maciej Mazurkiewicz ◽  
Eugeniusz Mokrzycki

Abstract Limited use of biomass has been observed in recent years. The processes of electricity and heat production in conventional boilers and fluidized bed boilers generate waste – mainly fly ash. This waste is traditionally used in many industries. The most important are: mining, production of building materials (including cement) and road construction. The use of fly ash in underground mining (suspension technology) is a method of fly ash recovery, which is typical for the Polish industry. The amount of fly ash (10 01 02) and waste (10 01 82) including ashes from fluidized bed boilers in the year 2012 amounted to 1,490.7 thousand tons. For many years, fly ashes from hard coal combustion in conventional boilers has also been used in various production technologies of building materials, such as: cement, concrete, building ceramics and lightweight aggregates. The ashes from hard coal combustion in fluidized bed boilers are also used in the production of cement and autoclaved aerated concrete. Due to extensive economic use, commercial power plants started to reclassify fly ash from hard coal combustion, turning waste into a by-product after meeting the requirements of the Act on waste of 14 December 2012. The ashes from the co-combustion of biomass are also used. The utilization of fly ash from lignite combustion, both from conventional boilers and fluidized bed boilers, is a cause of concern, while the total recovery of fly ash from the combustion of hard coal and lignite has decreased in recent years. For this reason, studies on the use of traditional fly ash technologies such as the production of building materials and new fly ash technologies such as the use as sorbents in power generation and wastewater treatment, as well as on binding CO2 through mineral sequestration in the Carbon Capture and Utilization, are being carried out.


Sign in / Sign up

Export Citation Format

Share Document