Determination of Kinetics and Stoichiometry of Chemical Sulfide Oxidation in Wastewater of Sewer Networks

2003 ◽  
Vol 37 (17) ◽  
pp. 3853-3858 ◽  
Author(s):  
Asbjørn H. Nielsen ◽  
Jes Vollertsen ◽  
Thorkild Hvitved-Jacobsen
2020 ◽  
Vol 4 (2) ◽  
pp. 261-271
Author(s):  
Samuel M. Lombardo ◽  
Amanda M. Vindedahl ◽  
William A. Arnold

Author(s):  
A. Baniya ◽  
S. Thapa ◽  
E. Borquist ◽  
D. Bailey ◽  
D. Wood ◽  
...  

Hydrogen sulfide (H2S) is rapidly emerging as a biologically significant signaling molecule. In recent studies, sulfide level in blood or plasma has been reported to be in the concentration between 10 and 300 μM suggesting it acts in various diseases. This work reports progress on a new Lab-on-a-Chip (LOC) device for these applications. The uniquely designed, hand-held device uses advanced liberation chemistry that releases H2S from liquid sample and an electrochemical approach to detect sulfide concentration from the aqueous solution. The device itself consists of three distinct layers of Polydimethylsiloxane (PDMS) structures and a three electrode system for direct and rapid H2S concentration measurement. In this work specifically, the oxidation of sulfide at the gold (Au) and platinum (Pt.) electrodes has been examined. This is the first known application of electrochemical H2S sensing in an LOC application. The analytical utility and performance of the device has been assessed through direct detection using chronoamperometry (CA) scan and cyclic voltammetry (CV). An electrocatalytic sulfide oxidation signal has been recorded for sulfide concentration range vs, Ag/AgCl at different pH buffers at the trapping chamber. The calibration curve in the range 1 μM to 1 M was obtained using this electrode setup. The detection limit was found to be 0.1 μM. This device shows promise for providing fast and inexpensive determination of H2S concentration in aqueous samples.


2007 ◽  
Vol 133 (6) ◽  
pp. 655-658 ◽  
Author(s):  
Asbjørn Haaning Nielsen ◽  
Thorkild Hvitved-Jacobsen ◽  
Jes Vollertsen

2006 ◽  
Vol 54 (6-7) ◽  
pp. 127-134 ◽  
Author(s):  
A.H. Nielsen ◽  
T. Hvitved-Jacobsen ◽  
J. Vollertsen

Sulfide buildup in sewer networks is associated with several problems, including health impacts, corrosion of sewer structures and odor nuisance. In recent years, significant advances in the knowledge of the major processes governing sulfide buildup in sewer networks have been made. This paper summarizes this newly obtained knowledge and emphasizes important implications of the findings. Model simulations of the in-sewer processes important for the sulfur cycle showed that sulfide oxidation in the wetted biofilm is typically the most important sink for dissolved sulfide in gravity sewers. However, sulfide emission and thereby potential hydrogen sulfide buildup in the sewer atmosphere is of particular importance in sewers constructed with large diameter pipes, in sewers constructed with steep slopes and in sewers conveying low pH wastewater. Precipitation of metal sulfides is only important when the sulfide concentration in the wastewater is low; i.e. less than 1 g S m−3.


Marine Drugs ◽  
2019 ◽  
Vol 17 (11) ◽  
pp. 643 ◽  
Author(s):  
Vittoria Mallia ◽  
Silvio Uhlig ◽  
Cheryl Rafuse ◽  
Juris Meija ◽  
Christopher O. Miles

Microcystins are cyclic heptapeptides from cyanobacteria that are potent inhibitors of protein phosphatases and are toxic to animals and humans. At present, more than 250 microcystin variants are known, with variants reported for all seven peptide moieties. While d-glutamic acid (d-Glu) is highly-conserved at position-6 of microcystins, there has been only one report of a cyanobacterium (Anabaena) producing microcystins containing l-Glu at the variable 2- and 4-positions. Liquid chromatography–mass spectrometry analyses of extracts from Planktothrix prolifica NIVA-CYA 544 led to the tentative identification of two new Glu-containing microcystins, [d-Asp3]MC-ER (12) and [d-Asp3]MC-EE (13). Structure determination was aided by thiol derivatization of the Mdha7-moiety and esterification of the carboxylic acid groups, while 15N-labeling of the culture and isotopic profile analysis assisted the determination of the number of nitrogen atoms present and the elemental composition of molecular and product-ions. The major microcystin analog in the extracts was [d-Asp3]MC-RR (1). A microcystin with an unprecedented high-molecular-mass (2116 Da) was also detected and tentatively identified as a sulfide-linked conjugate of [d-Asp3]MC-RR (15) by LC–HRMS/MS and sulfide oxidation, together with its sulfoxide (16) produced via autoxidation. Low levels of [d-Asp3]MC-RW (14), [d-Asp3]MC-LR (4), [d-Asp3,Mser7]MC-RR (11), [d-Asp3]MC-RY (17), [d-Asp3]MC-RF (18), [d-Asp3]MC-RR–glutathione conjugate (19), and [d-Asp3]MC-RCit (20), the first reported microcystin containing citrulline, were also identified in the extract, and an oxidized derivative of [d-Asp3]MC-RR and the cysteine conjugate of 1 were partially characterized.


2000 ◽  
Vol 66 (2) ◽  
pp. 712-717 ◽  
Author(s):  
Lucas Lüthy ◽  
Markus Fritz ◽  
Reinhard Bachofen

ABSTRACT A push-pull method, previously used in groundwater analyses, was successfully adapted for measuring sulfide turnover rates in situ at different depths in the meromictic Lake Cadagno. In the layer of phototrophic bacteria at about 12 m in depth net sulfide consumption was observed during the day, indicating active bacterial photosynthesis. During the night the sulfide turnover rates were positive, indicating a net sulfide production from the reduction of more-oxidized sulfur compounds. Because of lack of light, no photosynthesis takes place in the monimolimnion; thus, only sulfide formation is observed both during the day and the night. Sulfide turnover rates in the oxic mixolimnion were always positive as sulfide is spontaneously oxidized by oxygen and as the rates of sulfide oxidation depend on the oxygen concentrations present. Sulfide oxidation by chemolithotrophic bacteria may occur at the oxicline, but this cannot be distinguished from spontaneous chemical oxidation.


1993 ◽  
Vol 39 (12) ◽  
pp. 1166-1168 ◽  
Author(s):  
C. W. Chan ◽  
Isamu Suzuki

A sensitive and quantitative analytical method for determining elemental sulfur in a biological system was developed. Elemental sulfur was determined after extraction with petroleum ether by cyanolysis and ferric thiocyanate color formation in acetone. The method was successfully applied to show that sulfide was oxidized by Thiobacillus thiooxidans to elemental sulfur nearly stoichiometrically when further oxidation of elemental sulfur was inhibited by N-ethylmaleimide.Key words: elemental sulfur, quantitative analysis, sulfide oxidation, Thiobacillus thiooxidans.


2004 ◽  
Vol 50 (4) ◽  
pp. 185-192 ◽  
Author(s):  
A. Haaning Nielsen ◽  
J. Vollertsen ◽  
T. Hvitved-Jacobsen

In this study, the kinetics and stoichiometry of chemical sulfide oxidation of wastewater from sewer networks were investigated. Based on experiments, it was shown that the stoichiometry could be considered identical for wastewater from two sampling sites. However, the kinetics differed significantly among the wastewaters from the two sites. Effects of pH and temperature were investigated in the pH and temperature ranges 5-9 and 5-25°C, respectively. The rate of chemical sulfide oxidation could be related to the dissociation of H2S to HS-, with HS- being oxidized at a higher rate than H2S. The temperature dependency of the chemical sulfide oxidation rate was described using an Arrhenius relationship. The oxidation rate was found to double with a temperature increase of 12¡C. The stoichiometry of the chemical oxidation was not significantly affected by varying pH and temperature. Based on the experiments, a general rate equation, including a stoichiometric coefficient describing chemical sulfide oxidation in wastewater was proposed, enabling the process to be incorporated into sewer process models that can predict odor and corrosion problems.


The paper presents modeling, design and analysis of sewage network of Utsav Vihar by means of SewerGEMS software which helps in the achievement of project results in a shorter period of time in an effective way and at reasonable prices. In the present study the sewerage was designed for Utsav Vihar area in North – West Delhi District. SewerGEMS software eases the designing for engineers because of unique features to offer a fully dynamic and multi-platform sanitary and combined sewer modeling solution which otherwise tends to consume a lot of time and energy. The software uses derived equations and theorems for calculating the hydraulic model. It enables engineers to analyze all sanitary and combined sewer networks in a single package. The hydraulic design section includes the calculation and determination of the transit, total flow and hydraulic modeling for network pipes diameters or slopes. The application generates reports, layouts, longitudinal or transverse cross section.


Sign in / Sign up

Export Citation Format

Share Document