Abstract
The following comments pertain to a paper of the above title by Mackay and Avons, published in Transactions of the Institution of the Rubber Industry, Vol. 16, pages 117–122, October 1940, and reprinted in Rubber Chemistry and Technology, Vol. 14, pages 520–524, April 1941. H. P. Stevens draws attention to the penultimate paragraph on p. 522 in which it is pointed out that the bromine method of oxidation is tedious and the reagent unhealthful, whereas perchloric acid may be dangerous. As a result of many years experience he is of the opinion that neither reagent is necessary. After adding nitric acid to the acetone extract in the flask, which should be covered with a watch glass, and when the reaction has subsided, about 0.5 gram of potassium chlorate is added and the mixture kept warm at 50 to 60° C. The top of a water oven is convenient; but the heating must be limited, as the yellow oxides of chlorine are rapidly driven off near 100°, and the liquid changes back from yellow to orange. The flask can be left to itself for an hour or two, but further addition of chlorate may be necessary to complete the oxidation. The contents are evaporated to dryness and taken up twice with concentrated hydrochloric acid preparatory to precipitation with barium chloride. A volumetric method may be preferable when a large number of routine tests have to be made, otherwise the final estimation can be made as barium sulfate.
THE DETERMINATION OF BARIUM CARBONATE AND BARIUM SULFATE IN VULCANIZED RUBBER GOODS
