Experimental Measurements and Thermodynamic Modeling of CO2Solubility at High Pressure in Model Apple Juices

2010 ◽  
Vol 49 (6) ◽  
pp. 2992-3000 ◽  
Author(s):  
Giovanna Ferrentino ◽  
Diego Barletta ◽  
Francesco Donsì ◽  
Giovanna Ferrari ◽  
Massimo Poletto
Keyword(s):  
High Pressure ◽  
Thermodynamic Modeling ◽  
Experimental Measurements

High-Pressure Soybean Oil Biodiesel Density: Experimental Measurements, Correlation by Tait Equation, and Perturbed Chain SAFT (PC-SAFT) Modeling

2019 ◽  
Vol 64 (9) ◽  
pp. 3994-4004 ◽  
Author(s):  
Rachid Aitbelale ◽  
Younes Chhiti ◽  
Fatima Ezzahrae M’hamdi Alaoui ◽  
Abdelaziz Sahib Eddine ◽  
Natalia Muñoz Rujas ◽  
...  
Keyword(s):  
High Pressure ◽  
Soybean Oil ◽  
Experimental Measurements ◽  
Tait Equation

scholarly journals Pulsed Supersonic Beams from High Pressure Source: Simulation Results and Experimental Measurements

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
U. Even
Keyword(s):  
High Pressure ◽  
High Vacuum ◽  
Experimental Measurements ◽  
Pressure Source ◽  
High Repetition ◽  
Supersonic Beams ◽  
Shaped Nozzle ◽  
Simulation Results ◽  
Fast Acting ◽  
High Vacuum Environment

Pulsed beams, originating from a high pressure, fast acting valve equipped with a shaped nozzle, can now be generated at high repetition rates and with moderate vacuum pumping speeds. The high intensity beams are discussed, together with the skimmer requirements that must be met in order to propagate the skimmed beams in a high-vacuum environment without significant disruption of the beam or substantial increases in beam temperature.

High-Pressure Pipelines Repaired by Steel Sleeve and Epoxy Composition

2013 ◽  
Vol 486 ◽  
pp. 181-188 ◽  
Author(s):  
Pavol Novák ◽  
Milan Žmindák ◽  
Zoran Pelagić
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
High Pressure ◽  
Material Properties ◽  
Welded Joint ◽  
Experimental Measurements ◽  
Filling Material ◽  
Epoxy Composition ◽  
State Of Stress ◽  
Steel Sleeve

The aim of this paper is first to determine the state of stress of welded joint repaired by steel sleeve and epoxy composition. Experimental measurements are performed on samples to determine required material properties. The structural analysis by finite element method (FEM) is performed for a pressurized pipe with insufficiently welded root and installed cold sleeve. Simulated is the case of depressurized pipes that could cause a breach of cohesion between filling material and surface of pipe or sleeve with usage of cohesive finite elements. In the end the sleeve dimensions are optimized with respect to maximum integrity to the repaired sleeve.

Sign in / Sign up

Export Citation Format

Share Document