scholarly journals Suspension and near-bed load sediment transport processes above a migrating, sand-rippled bed under shoaling waves

Author(s):  
D. Hurther ◽  
Peter D. Thorne
2010 ◽  
Vol 58 (1) ◽  
pp. 36-48 ◽  
Author(s):  
Raaj Ramsankaran ◽  
Christian Maerker ◽  
Andreas Malcherek

Numerical modelling of hydrodynamics and sediment transport processes during storm events in a non-perennial riverThis article presents the numerical modelling of hydrodynamics and sediment transport processes in the seasonal Pathri Rao River, which flows in the Northern part of India. Modelling is made by the coupled application of the hydrodynamic model called TELEMAC-2D and the morphodynamic model called SediMorph. The hydrodynamic model results are validated with the observed data and it has been found that the present model provides reasonable predictions. Likewise, the validation of the morphodynamic model is also presented. For this purpose, the suspended and bed load transport modules are validated separately for four runoff events observed during the investigations. The validation of the former is approached by comparing the depth-averaged suspended transport concentrations against experimental measurements made at the make-shift gauging station and subsequent comparison against experimental measurements. On the other hand, due to non-availability of the observed values on bed load sediment transport, the bed load sediment transport and bed evolution numerical results could not be validated quantitatively and was approached only on qualitative basis. In general, both validations present an acceptable agreement with measurements and scientific facts. Further, this study demonstrates that the coupled TELEMAC-2D/SediMorph system could be used with confidence for practical applications in the Pathri Rao River.


2011 ◽  
Vol 666 ◽  
pp. 36-76 ◽  
Author(s):  
CRISTIAN ESCAURIAZA ◽  
FOTIS SOTIROPOULOS

Motivated by the need to gain fundamental insights into the mechanisms of bed-load sediment transport in turbulent junction flows, we carry out a computational study of Lagrangian dynamics of inertial particles initially placed on the bed upstream of a surface-mounted circular cylinder in a rectangular open channel (Dargahi, J. Hydraul. Engng, vol. 116, 1990, pp. 1197–1214). The flow field at Re = 39000 is simulated using the detached eddy simulation (DES) approach (Spalart et al., In Advances in DNS/LES, ed. C. Liu & Z. Liu, 1997, Greyden), which has already been shown to accurately resolve most of the turbulent stresses produced by the low-frequency, bimodal fluctuations of the turbulent horseshoe vortex (Paik et al., J. Hydraul. Engng, vol. 131, 1990, pp. 441–456; Escauriaza & Sotiropoulos, Flow Turbul. Combust., 2010, in press). The trajectory and momentum equations for the sediment particles are integrated numerically simultaneously with the flow governing equations assuming one-way coupling and neglecting particle-to-particle interactions (dilute flow) but taking into account bed–particle interactions and the effects of the instantaneous hydrodynamic forces induced by the resolved fluctuations of the coherent vortical structures. The computed results show that, in accordance with the simulated clear-water scour condition (i.e. the magnitude of the particle stresses is near the threshold of motion), the transport of sediment grains is highly intermittent and exhibits essentially all the characteristics of bed-load sediment transport observed in laboratory and field experiments. Groups of sediment grains are dislodged from the bed simultaneously in seemingly random bursting events and begin to move, saltating or sliding along the bed. Furthermore, particles that are not entrained into the bed-load layer are found to form streaks aligned with near-wall vortices around the cylinder. The global transport of particles is studied by performing a statistical analysis of the bed-load flux to reveal scale-invariance of the process and multifractality of particle transport as the overall effect of the coherent structures of the flow. A major finding of this work is that a relatively simple Lagrangian model coupled with a coherent-structure resolving simulation of the turbulent flow is able to reproduce the sediment dynamics observed in multiple experiments performed under similar conditions, and provide fundamental information on the initiation of motion and the multifractal nature of bed-load transport processes. The results also motivate the development of new Eulerian bed-load transport models that consider unsteady conditions and incorporate the intermittency of the unresolved scales of sediment motion.


2016 ◽  
Vol 75 (sp1) ◽  
pp. 497-501
Author(s):  
Zhengtong Yang ◽  
Huajun Li ◽  
Bingchen Liang ◽  
Dongyoung Lee ◽  
Xinying Pan ◽  
...  

Author(s):  
Li Zhijing ◽  
Li Dazhi ◽  
Liu Xiaobin ◽  
Jin Zhongwu ◽  
Chen Dasong

2015 ◽  
Vol 120 (11) ◽  
pp. 2298-2317 ◽  
Author(s):  
Siobhan L. Fathel ◽  
David Jon Furbish ◽  
Mark W. Schmeeckle

1990 ◽  
Vol 28 (1) ◽  
pp. 5-23 ◽  
Author(s):  
B. C. Phillips ◽  
A. J. Sutherland

Author(s):  
Alban Kuriqi

In this paper is discussed sediment transport as a mechanical process that characterises a natural stream or channel flow regime. The objective of experimental work presented in this paper is to recall and to give another prospect of well-known Meyer-Peter and Müller approach for estimation of Shield’s number (θ_c,θ) in laboratory conditions, and calibration of dimensionless MPM number (A). For this purpose two different experiments are conducted, during the first experiment water amount flushed on the flume and bed slope was changed simultaneously until equilibrium state is achieved, meanwhile is estimated the critical Shield’s number (θ_c). While, during the second experiment, water amount was kept constant, only bed slope of flume was continuously tilted, meanwhile sediment, discharge and Shield’s number (θ) was determined for given hydraulic conditions. In addition calibration of dimensionless MPM number (A) was performed, where several iteration were considered until for (A=3.42), sediment discharge measured become almost equal with sediment discharge computed by using MPM formula. After these experiments, is concluded that MPM formula can be used also for other certain initial condition and similar procedure may be adopted to calibrate the dimensionless MPM number (A) .


2021 ◽  
Author(s):  
Santiago Benavides ◽  
Eric Deal ◽  
Matthew Rushlow ◽  
Jeremy Venditti ◽  
Qiong Zhang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document