scholarly journals Novel behavior in a polymer solution: the disappearance of the melting temperature (Tm) and enthalpy change (ΔHm) of the solvent

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Mi Rae Kim ◽  
Hee Jung Park ◽  
Kang Ho Cheon ◽  
Choong Kyun Yeom ◽  
Kee Yoon Lee
1999 ◽  
Vol 556 ◽  
Author(s):  
L. Li ◽  
D. M. Strachan ◽  
L. L. Davis ◽  
H. Li ◽  
M. Qian

AbstractGadolinium and lanthanum solubility limits in a sodium-alumino-borosilicate glass system were studied. As melting temperature increased from 1400°C to 1450°C, 1500°C and 1550°C, the solubility of gadolinium in the baseline glass 15B2O3-5A12O3-20Na2O-60SiO2 (in molar composition) increased from 10.1 to 11.3, 12.2 and 13.1 (in mole percent of Gd2O3). The enthalpy change of Gd2O3 dissolution in this baseline glass is about 43.6 kJ/mol. Boron effect on lanthanum solubility was studied using the following baseline glasses: xB2O3-20Na2O- 5Al2O3-60SiO2, where x equals to 5, 10, 15, and 20, respectively. It was found that lanthanum solubility limit increased from 8.4 to 10.3, 12.5 and 14.9 (in mole percent of La2O3) as B2O3 increased from 5.1 to 9.5, 13.1 and 16.2 mol%. Gd2O. and La2O3 have similar solubility limits. Solubility limits of mixtures containing different ratios of Gd2O3 to La2O3 in the baseline glass 15B2O3-20Na2O-5A12O3-60SiO2 were found insensitive to the ratio of La/Gd. As far as gadolinium is concerned, its solubility limit will decrease when other lanthanides are introduced.


1995 ◽  
Vol 5 (7) ◽  
pp. 1017-1033 ◽  
Author(s):  
S. A. Patlazhan ◽  
P. Navard

1981 ◽  
Vol 42 (6) ◽  
pp. 767-781 ◽  
Author(s):  
A. Knoll ◽  
L. Schäfer ◽  
T.A. Witten

2019 ◽  
Author(s):  
Samuele Giani ◽  
Naomi M. Towers

Laboratories measuring melting temperature according to USP<741> Melting Range or Temperature, must comply with the amended calibration and adjustment requirements described in this regulation. Compliance is ensured by adjusting the instrument with secondary reference standards, traceable to USP, followed by verification of accuracy using USP primary reference standards.


Alloy Digest ◽  
1981 ◽  
Vol 30 (5) ◽  

Abstract INDALLOY 136 is a bismuth-base, eutectic alloy that melts at 136 F (57.8 C). It is used widely in industry because of its low melting temperature and controlled-shrinkage characteristics. It provides the scientist, engineer and technician with an easily castable material that is ready for use soon after it freezes. The alloy can be recovered easily and recycled into new uses any number of times. Among its uses are anchoring parts for machining, proof casting and low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-24. Producer or source: Indium Corporation of America.


Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  

Abstract CERROLOW-136 Alloy is a bismuth-base eutectic alloy that melts at 136 F (57.8 C), hence its identifying number. It is widely used in industry because of its low melting temperature and controlled-shrinkage characteristics. Among tis many applications are (1) Anchoring parts such as jet blades for machining, testing and inspection, (2) In the foundry for fusible cores in compound cores and (3) Low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-13. Producer or source: Cerro Metal Products.


Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  

Abstract CERROLOW-117 Alloy is a bismuth-base eutectic alloy that melts at 117 F (47 C). Its low melting temperature and controlled-shrinkage characteristics make it very useful in industry for such applications as proof casting in tool and die shops, dental models and low-temperature solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-8. Producer or source: Cerro Metal Products.


Sign in / Sign up

Export Citation Format

Share Document