The European steel industry produces about 70 million tons/year of steel by the electric arc furnace (EAF). The slag consists of about 15% by weight of the produced steel, thus from the perspective of the circular economy, it has a high potential as a co-product. This research aims to assess an innovative reuse of EAF slag as filler in different polymer matrixes: thermoplastic (polypropylene), thermosetting (epoxy resin), elastomeric (nitrile butadiene rubber), and recycled end of life rubber tire. A comparison between neat polymer and polymer filled with a certain amount of EAF slag has been carried out by tensile (or flexural), compression, and hardness tests. Experimental results show that slag as a filler increases the composites’ hardness and elastic modulus at the expense of toughness. For a safe reuse of the slag, the leaching of hazardous elements must comply with current legislation. It was found that, although the used EAF slag releases small amounts of Cr, Mo, and V, incorporating it into a polymer matrix reduces the leaching. The EAF slag particles distribution has been observed by scanning electron microscopy (SEM) images. The obtained results show good technical feasibility of this innovative slag application so that it could pave the way to a new industrial symbiosis between dissimilar sectors, bringing economic and environmental benefits.
Chemical Composition, pH Value, and Points of Zero Charge of High Calcium and High Iron Electric Arc Furnace Slag
