scholarly journals Optimal control of pitch angle of large wind turbine based on speed differential

2020 ◽  
Vol 194 ◽  
pp. 03008
Author(s):  
Xin GAO ◽  
Xiaoyu WANG ◽  
Jiahuan HE
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Power Output ◽  
Pitch Angle ◽  
Turbine Blades ◽  
Energy Utilization ◽  
Feedback Signal ◽  
Wind Turbine Blades ◽  
Low Wind Speed ◽  
Turbine Speed

In order to improve the power output of wind turbine at low wind speed, this paper studies the aerodynamic performance of wind turbine blades at different installation angles. It is found that the optimal pitch angle of wind turbine can be switched between different installation angles when wind speed changes by introducing wind turbine speed differential feedback signal in PI controller of variable pitch, so as to track the optimal wind energy utilization coefficient The purpose of improving wind turbine power output. In order to verify the reliability of the analysis results, bladed is used to simulate the model of a 1.5MW unit with pitch differential control signal. At the same time, the research results are applied to the actual operation of the unit. The results show that the power curve of the wind turbine unit at low wind speed can be improved and the annual power generation can be increased by 1.24%.

Study of the Textile Composite Adaptive Blade of Small Wind Turbine

2011 ◽  
Vol 332-334 ◽  
pp. 828-832
Author(s):  
Xiao Dong Chen ◽  
Mei Ling Kuang ◽  
Ya Ming Jiang
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Carbon Fibers ◽  
Wind Turbines ◽  
Power Output ◽  
Turbine Blades ◽  
Main Body ◽  
Wind Turbine Blades ◽  
Textile Composite ◽  
Small Wind Turbine

This paper is mainly to design the small wind turbine blades to make the wind turbines have automatic braking ability. This study has two main aspects, including choosing the reinforced materials and designing the structure of the blades. According to the fiber hybrid principle, carbon fibers are employed in the main stress area of the blades and other area using glass fiber. At the same time, Aramid fibers are mixed in every area of the blade in order to enhance the tenacity of the blade. The other work is designing the structure of the blade with big main body and small abdomen which twists easily. At the designed wind speed, the power output reaches its rated capacity. Above this wind speed, turbine blades twist to adapt to wind speed and make the rotor solidity of wind turbine declined. While the wind speed changes and becomes small, the torsion of wind turbines’ blades turns back. Thus the wind turbines’ rotor solidity becomes greater and power output increases. So at a certain speed ( 36m/s), the wind turbine can adjusts itself to control the power output keeps on a certain level. And then it brakes by itself.

Evaluation of the influence of wind speed and angle of attack on the aerodynamic effect of wind turbine blades

2017 ◽  
Author(s):  
Salete Alves ◽  
Luiz Guilherme Vieira Meira de Souza ◽  
Edália Azevedo de Faria ◽  
Maria Thereza dos Santos Silva ◽  
Ranaildo Silva
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Angle Of Attack ◽  
Wind Turbine Blades ◽  
Aerodynamic Effect

scholarly journals Analysis of Wind Turbine Aging through Operation Data Calibrated by LiDAR Measurement

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2319
Author(s):  
Hyun-Goo Kim ◽  
Jin-Young Kim
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Farm ◽  
Free Stream ◽  
Turbine Blades ◽  
Wind Farms ◽  
Lidar Measurement ◽  
Wind Turbine Blades ◽  
Wake Effect

This study analyzed the performance decline of wind turbine with age using the SCADA (Supervisory Control And Data Acquisition) data and the short-term in situ LiDAR (Light Detection and Ranging) measurements taken at the Shinan wind farm located on the coast of Bigeumdo Island in the southwestern sea of South Korea. Existing methods have generally attempted to estimate performance aging through long-term trend analysis of a normalized capacity factor in which wind speed variability is calibrated. However, this study proposes a new method using SCADA data for wind farms whose total operation period is short (less than a decade). That is, the trend of power output deficit between predicted and actual power generation was analyzed in order to estimate performance aging, wherein a theoretically predicted level of power generation was calculated by substituting a free stream wind speed projecting to a wind turbine into its power curve. To calibrate a distorted wind speed measurement in a nacelle anemometer caused by the wake effect resulting from the rotation of wind-turbine blades and the shape of the nacelle, the free stream wind speed was measured using LiDAR remote sensing as the reference data; and the nacelle transfer function, which converts nacelle wind speed into free stream wind speed, was derived. A four-year analysis of the Shinan wind farm showed that the rate of performance aging of the wind turbines was estimated to be −0.52%p/year.

scholarly journals Remaining Useful Life Estimation of Wind Turbine Blades under Variable Wind Speed Conditions Using Particle Filters

2018 ◽  
Vol 10 (1) ◽  
Author(s):  
Bhavana Valeti ◽  
Shamim N. Pakzad
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Remaining Useful Life ◽  
Structural Components ◽  
Wind Turbine Blades ◽  
Average Wind Speed ◽  
Average Wind ◽  
Useful Life ◽  
Variable Wind

Rotor blades are the most complex structural components in a wind turbine and are subjected to continuous cyclic loads of wind and self-weight variation. The structural maintenance operations in wind farms are moving towards condition based maintenance (CBM) to avoid premature failures. For this, damage prognosis with remaining useful life (RUL) estimation in wind turbine blades is necessary. Wind speed variation plays an important role influencing the loading and consequently the RUL of the structural components. This study investigates the effect of variable wind speed between the cutin and cut-out speeds of a typical wind farm on the RUL of a damage detected wind turbine blade as opposed to average wind speed assumption. RUL of wind turbine blades are estimated for different initial crack sizes using particle filtering method which forecasts the evolution of fatigue crack addressing the non-linearity and uncertainty in crack propagation. The stresses on a numerically simulated life size onshore wind turbine blade subjected to the above wind speed loading cases are used in computing the crack propagation observation data for particle filters. The effects of variable wind speed on the damage propagation rates and RUL in comparison to those at an average wind speed condition are studied and discussed.

Computation of Hoisting Forces on Wind Turbine Blades Using Computation Fluid Dynamics

2013 ◽  
Vol 446-447 ◽  
pp. 452-457 ◽  
Author(s):  
Yong Wang ◽  
De Tian ◽  
Wei He
Keyword(s):  
Fluid Dynamics ◽  
Wind Turbine ◽  
Pitch Angle ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Azimuth Angle ◽  
Wind Turbine Blades ◽  
Mesh Model ◽  
Cfd Method ◽  
Yaw Angle

The hoisting forces on a 38.5m wind turbine blade in multiple positions are computed using the computational fluid dynamics (CFD) method. The computation model is constructed with the steady wind conditions, blade mesh model and the blade positions which are determined by the blade pitch angle, azimuth angle and rotor yaw angle. The maximal and minimal hoisting forces in three-dimensional coordinates are found and the corresponding pitch angle, azimuth angle and yaw angle are obtained. The change of the hoisting forces on wind turbine blades is analyzed. Suggestions are given to decrease the hoisting forces of the blade in open wind environment.

scholarly journals A Simplified Morphing Blade for Horizontal Axis Wind Turbines

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
Weijun Wang ◽  
Stéphane Caro ◽  
Fouad Bennis ◽  
Oscar Roberto Salinas Mejia
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Production ◽  
Turbine Blades ◽  
Wind Turbine Blades ◽  
Annual Average ◽  
Average Wind Speed ◽  
Pitch Control ◽  
Average Wind

The aim of designing wind turbine blades is to improve the power capture ability. Since rotor control technology is currently limited to controlling rotational speed and blade pitch, an increasing concern has been given to morphing blades. In this paper, a simplified morphing blade is introduced, which has a linear twist distribution along the span and a shape that can be controlled by adjusting the twist of the blade's root and tip. To evaluate the performance of wind turbine blades, a numerical code based on the blade element momentum theory is developed and validated. The blade of the NREL Phase VI wind turbine is taken as a reference blade and has a fixed pitch. The optimization problems associated with the control of the morphing blade and a blade with pitch control are formulated. The optimal results show that the morphing blade gives better results than the blade with pitch control in terms of produced power. Under the assumption that at a given site, the annual average wind speed is known and the wind speed follows a Rayleigh distribution, the annual energy production of wind turbines was evaluated for three types of blade, namely, morphing blade, blade with pitch control and fixed pitch blade. For an annual average wind speed varying between 5 m/s and 15 m/s, it turns out that the annual energy production of the wind turbine containing morphing blades is 24.5% to 69.7% higher than the annual energy production of the wind turbine containing pitch fixed blades. Likewise, the annual energy production of the wind turbine containing blades with pitch control is 22.7% to 66.9% higher than the annual energy production of the wind turbine containing pitch fixed blades.

Optimal Design of Horizontal Axis Wind Turbine Blades

2008 ◽  
Author(s):  
Ohad Gur ◽  
Aviv Rosen
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Design Method ◽  
Turbine Blades ◽  
Horizontal Axis ◽  
Optimization Strategy ◽  
Wind Turbine Blades ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Design Variables

The optimal aerodynamic design of Horizontal Axis Wind Turbine (HAWT) is investigated. The Blade-element/Momentum model is used for the aerodynamic analysis. In the first part of the paper a simple design method is derived, where the turbine blade is optimized for operation at a specific wind speed. Results of this simple optimization are presented and discussed. Besides being optimized for operation at a specific wind speed, without considering operation at other wind speeds, the simple model is also limited in the choice of design goals (cost functions), design variables and constraints. In the second part of the paper a comprehensive design method that is based on a mixed numerical optimization strategy, is presented. This method can handle almost any combination of: design goal, design variables, and constraints. Results of this method are presented, compared with the results of the simple optimization, and discussed.

Sign in / Sign up

Export Citation Format

Share Document