scholarly journals Clear-air lidar dark band

2018 ◽  
Vol 176 ◽  
pp. 05028
Author(s):  
Paolo Di Girolamo ◽  
Andrea Scoccione ◽  
Marco Cacciani ◽  
Donato Summa ◽  
Jan H. Schween

This paper illustrates measurements carried out by the Raman lidar BASIL in the frame of HOPE, revealing the presence of a clear-air dark band phenomenon (i.e. the appearance of a minimum in lidar backscatter echoes) in the upper portion of the convective boundary layer. The phenomenon is clearly distinguishable in the lidar backscatter echoes at 1064 nm. This phenomenon is attributed to the presence of lignite aerosol particles advected from the surrounding open pit mines in the vicinity of the measuring site.

2018 ◽  
Vol 18 (7) ◽  
pp. 4885-4896 ◽  
Author(s):  
Paolo Di Girolamo ◽  
Andrea Scoccione ◽  
Marco Cacciani ◽  
Donato Summa ◽  
Benedetto De Rosa ◽  
...  

Abstract. This paper illustrates measurements carried out by the Raman lidar BASIL in the frame of the HD(CP)2 Observational Prototype Experiment (HOPE), revealing the presence of a clear-air dark band phenomenon (i.e. a minimum in lidar backscatter echoes) in the upper portion of the convective boundary layer. The phenomenon is clearly distinguishable in the lidar backscatter echoes at 532 and 1064 nm, as well as in the particle depolarisation data. This phenomenon is attributed to the presence of lignite aerosol particles advected from the surrounding open pit mines in the vicinity of the measuring site. The paper provides evidence of the phenomenon and illustrates possible interpretations for its occurrence.


2017 ◽  
Author(s):  
Paolo Di Girolamo ◽  
Andrea Scoccione ◽  
Marco Cacciani ◽  
Donato Summa ◽  
Jan H. Schween

Abstract. This paper illustrates measurements carried out by the Raman lidar BASIL in the frame of the HD(CP)2) Observational Prototype Experiment (HOPE), revealing the presence of a clear-air dark band phenomenon (i.e. a minimum in lidar backscatter echoes) in the upper portion of the convective boundary layer. The phenomenon is clearly distinguishable in the lidar backscatter echoes at 532 and 1064 nm, as well as in the particle depolarization data. This phenomenon is attributed to the presence of lignite aerosol particles advected from the surrounding open pit mines in the vicinity of the measuring site. The paper provides evidence of the phenomenon and illustrates possible interpretations for its occurrence.


2010 ◽  
Vol 136 (2) ◽  
pp. 253-284 ◽  
Author(s):  
Volker Wulfmeyer ◽  
Sandip Pal ◽  
David D. Turner ◽  
Erin Wagner

2014 ◽  
Vol 14 (21) ◽  
pp. 29019-29055 ◽  
Author(s):  
A. Behrendt ◽  
V. Wulfmeyer ◽  
E. Hammann ◽  
S. K. Muppa ◽  
S. Pal

Abstract. The rotational Raman lidar of the University of Hohenheim (UHOH) measures atmospheric temperature profiles during daytime with high resolution (10 s, 109 m). The data contain low noise errors even in daytime due to the use of strong UV laser light (355 nm, 10 W, 50 Hz) and a very efficient interference-filter-based polychromator. In this paper, we present the first profiling of the second- to forth-order moments of turbulent temperature fluctuations as well as of skewness and kurtosis in the convective boundary layer (CBL) including the interfacial layer (IL). The results demonstrate that the UHOH RRL resolves the vertical structure of these moments. The data set which is used for this case study was collected in western Germany (50°53'50.56′′ N, 6°27'50.39′′ E, 110 m a.s.l.) within one hour around local noon on 24 April 2013 during the Intensive Observations Period (IOP) 6 of the HD(CP)2 Observational Prototype Experiment (HOPE), which is embedded in the German project HD(CP)2 (High-Definition Clouds and Precipitation for advancing Climate Prediction). First, we investigated profiles of the noise variance and compared it with estimates of the statistical temperature measurement uncertainty Δ T based on Poisson statistics. The agreement confirms that photon count numbers obtained from extrapolated analog signal intensities provide a lower estimate of the statistical errors. The total statistical uncertainty of a 20 min temperature measurement is lower than 0.1 K up to 1050 m a.g.l. at noontime; even for single 10 s temperature profiles, it is smaller than 1 K up to 1000 m a.g.l.. Then we confirmed by autocovariance and spectral analyses of the atmospheric temperature fluctuations that a temporal resolution of 10 s was sufficient to resolve the turbulence down to the inertial subrange. This is also indicated by the profile of the integral scale of the temperature fluctuations, which was in the range of 40 to 120 s in the CBL. Analyzing then profiles of the second-, third-, and forth-order moments, we found the largest values of all moments in the IL around the mean top of the CBL which was located at 1230 m a.g.l. The maximum of the variance profile in the IL was 0.40 K2 with 0.06 and 0.08 K2 for the sampling error and noise error, respectively. The third-order moment was not significantly different from zero inside the CBL but showed a negative peak in the IL with a minimum of −0.72 K3 and values of 0.06 and 0.14 K3 for the sampling and noise errors, respectively. The forth-order moment and kurtosis values throughout the CBL were quasi-normal.


Sign in / Sign up

Export Citation Format

Share Document