Direct numerical simulation of turbulent thermal boundary layers

2000 ◽  
Vol 12 (10) ◽  
pp. 2555 ◽  
Author(s):  
Hojin Kong ◽  
Haecheon Choi ◽  
Joon Sik Lee
Keyword(s):  
Numerical Simulation ◽  
Direct Numerical Simulation ◽  
Boundary Layers ◽  
Thermal Boundary Layers

scholarly journals Self-similar compressible turbulent boundary layers with pressure gradients. Part 1. Direct numerical simulation and assessment of Morkovin’s hypothesis

2019 ◽  
Vol 880 ◽  
pp. 239-283 ◽  
Author(s):  
Christoph Wenzel ◽  
Tobias Gibis ◽  
Markus Kloker ◽  
Ulrich Rist
Keyword(s):  
Numerical Simulation ◽  
Boundary Layer ◽  
Mach Number ◽  
Direct Numerical Simulation ◽  
Boundary Layers ◽  
Turbulent Boundary Layers ◽  
Shear Stresses ◽  
Pressure Gradients ◽  
Mean Flow ◽  
Self Similar

A direct numerical simulation study of self-similar compressible flat-plate turbulent boundary layers (TBLs) with pressure gradients (PGs) has been performed for inflow Mach numbers of 0.5 and 2.0. All cases are computed with smooth PGs for both favourable and adverse PG distributions (FPG, APG) and thus are akin to experiments using a reflected-wave set-up. The equilibrium character allows for a systematic comparison between sub- and supersonic cases, enabling the isolation of pure PG effects from Mach-number effects and thus an investigation of the validity of common compressibility transformations for compressible PG TBLs. It turned out that the kinematic Rotta–Clauser parameter $\unicode[STIX]{x1D6FD}_{K}$ calculated using the incompressible form of the boundary-layer displacement thickness as length scale is the appropriate similarity parameter to compare both sub- and supersonic cases. Whereas the subsonic APG cases show trends known from incompressible flow, the interpretation of the supersonic PG cases is intricate. Both sub- and supersonic regions exist in the boundary layer, which counteract in their spatial evolution. The boundary-layer thickness $\unicode[STIX]{x1D6FF}_{99}$ and the skin-friction coefficient $c_{f}$, for instance, are therefore in a comparable range for all compressible APG cases. The evaluation of local non-dimensionalized total and turbulent shear stresses shows an almost identical behaviour for both sub- and supersonic cases characterized by similar $\unicode[STIX]{x1D6FD}_{K}$, which indicates the (approximate) validity of Morkovin’s scaling/hypothesis also for compressible PG TBLs. Likewise, the local non-dimensionalized distributions of the mean-flow pressure and the pressure fluctuations are virtually invariant to the local Mach number for same $\unicode[STIX]{x1D6FD}_{K}$-cases. In the inner layer, the van Driest transformation collapses compressible mean-flow data of the streamwise velocity component well into their nearly incompressible counterparts with the same $\unicode[STIX]{x1D6FD}_{K}$. However, noticeable differences can be observed in the wake region of the velocity profiles, depending on the strength of the PG. For both sub- and supersonic cases the recovery factor was found to be significantly decreased by APGs and increased by FPGs, but also to remain virtually constant in regions of approximated equilibrium.

Coherent structures in direct numerical simulation of turbulent boundary layers at Mach 3

2007 ◽  
Vol 594 ◽  
pp. 59-69 ◽  
Author(s):  
MATTHEW J. RINGUETTE ◽  
MINWEI WU ◽  
M. PINO MARTÍN
Keyword(s):  
Numerical Simulation ◽  
Direct Numerical Simulation ◽  
Boundary Layers ◽  
Coherent Structures ◽  
Mass Flux ◽  
Large Scale ◽  
Turbulent Boundary Layers ◽  
Turbulence Structure ◽  
Taylor’S Hypothesis ◽  
Mach 3

We demonstrate that data from direct numerical simulation of turbulent boundary layers at Mach 3 exhibit the same large-scale coherent structures that are found in supersonic and subsonic experiments, namely elongated, low-speed features in the logarithmic region and hairpin vortex packets. Contour plots of the streamwise mass flux show very long low-momentum structures in the logarithmic layer. These low-momentum features carry about one-third of the turbulent kinetic energy. Using Taylor's hypothesis, we find that these structures prevail and meander for very long streamwise distances. Structure lengths on the order of 100 boundary layer thicknesses are observed. Length scales obtained from correlations of the streamwise mass flux severely underpredict the extent of these structures, most likely because of their significant meandering in the spanwise direction. A hairpin-packet-finding algorithm is employed to determine the average packet properties, and we find that the Mach 3 packets are similar to those observed at subsonic conditions. A connection between the wall shear stress and hairpin packets is observed. Visualization of the instantaneous turbulence structure shows that groups of hairpin packets are frequently located above the long low-momentum structures. This finding is consistent with the very large-scale motion model of Kim & Adrian (1999).

Direct numerical simulation of flow transition in high-speed boundary layers around airfoils

1997 ◽  
Author(s):  
Zhining Liu ◽  
Wei Zhao ◽  
Chaoqun Liu ◽  
Guohua Xiong ◽  
Zhining Liu ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Direct Numerical Simulation ◽  
Boundary Layers ◽  
High Speed ◽  
Flow Transition
Sign in / Sign up

Export Citation Format

Share Document