Flexible full color organic light-emitting diode display on polyimide plastic substrate driven by amorphous indium gallium zinc oxide thin-film transistors

2009 ◽  
Vol 95 (1) ◽  
pp. 013503 ◽  
Author(s):  
Jin-Seong Park ◽  
Tae-Woong Kim ◽  
Denis Stryakhilev ◽  
Jae-Sup Lee ◽  
Sung-Guk An ◽  
...  
2020 ◽  
Vol 20 (11) ◽  
pp. 6916-6919
Author(s):  
Do Young Won ◽  
Hyun Min Kim ◽  
Yun Ju Oh ◽  
Manh-Cuong Nguyen ◽  
Rino Choi ◽  
...  

Plastic organic light emitting diode displays suffer from residual image, which is closely connected with the hysteresis of the driving thin-film transistor in the pixels. Therefore, in researching paper, we manufactured an OLED display comprise a polyimide substrate and an amorphous indium gallium zinc oxide thin film transistor active layer. Paper proposed a solution for reducing hysteresis through oxygen partial pressure control and evaluated it using hysteresis analysis. The results showed that hysteresis is strongly dependent on the threshold voltage is settled by the oxygen partial pressure while active layer deposition of the TFT. Moreover, hysteresis decreases with increasing temperature.


2020 ◽  
Vol 20 (11) ◽  
pp. 6877-6883
Author(s):  
Do Young Won ◽  
Hyun Min Kim ◽  
Manh-Cuong Nguyen ◽  
Jae-Min Myoung ◽  
Rino Choi ◽  
...  

For the evaluation of the residual image suppression, the amorphous indium-gallium-zinc-oxide thin film transistor was manufactured with electric field shield metal on silicon oxide multi-buffer layer, without the need for a silicon crystallization process through the excimer laser process, and is advantageous for the manufacture of large-scale plastic organic light-emitting display. We conducted a study on the propensity to suppress a residual image according to the temperature of the annealing process in amorphous indium gallium zinc oxide. The evaluation divided by the ambient process temperature conditions to measure the change and restoration tendency of the gray current by the black/white current of thin film transistors, and for precise measurement of the current change intervals, the current was analyzed in 0.004 seconds per point. Through the study, residual image of amorphous Indium Gallium Zinc Oxide transistor was found to be suppressed as the temperature of the annealing crystallization increased from 250°C to 325°C, and there was no improvement effect on the 325°C or higher. The trend of threshold voltage shift of thin film transistors according to the two process temperature conditions, 250°C and 325°C, was analyzed by Two sample T analysis method, and the analysis confirmed that the trend of current deterioration is different through p-value 0.007.


2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
Sungho Woo ◽  
Dae-Hwan Kim ◽  
Yoon Soo Han ◽  
Byeong-Dae Choi

We developed a single-panel LCD microdisplay system using a field-sequential color (FSC) driving method and an organic light-emitting diode (OLED) as a backlight unit (BLU). The 0.76′′ OLED BLU with red, green, and blue (RGB) colors was fabricated by a conventional UV photolithography patterning process and by vacuum deposition of small molecule organic layers. The field-sequential driving frequency was set to 255 Hz to allow each of the RGB colors to be generated without color mixing at the given display frame rate. A prototype FSC LCD microdisplay system consisting of a 0.7′′ LCD microdisplay panel and the 0.76′′ OLED BLU successfully exhibited color display and moving picture images using the FSC driving method.


Sign in / Sign up

Export Citation Format

Share Document