Injection moulding is one the most familiar processes for manufacturing of plastic parts by injecting molten thermoplastic polymers into a metallic mould. The cycle time of this process consists of the phases of injection, packing, cooling, and ejection of the final product. Shortening of cycle time is a key consideration to increase productivity. Therefore, in this manuscript the adoption of additively manufactured mould inserts with conformal cooling channels by means of selective laser melting (SLM) with the aim to reduce process cycles is presented. The design and manufacture of a mould insert with conformal cooling channels for producing pressure fitting thermoplastic parts is described. Numerical analysis of the injection process and simulation of shape distortions after SLM were conducted providing useful results for the design and manufacture of the mould insert. The results of the numerical analyses are compared with experimental 3D geometrical data of the additively manufactured mould insert. Temperature measurements during the real injection moulding process demonstrating promising findings. The adoption of the introduced method for the series production of injection moulded thermoplastics proves a shortening of cycle times of up to 32% and a final product shape quality improvement of up to 77% when using mould inserts with conformal cooling channels over the conventional mould inserts.
LIMITED RUN PRODUCTION USING ALUMIDE� TOOLING FOR THE PLASTIC INJECTION MOULDING PROCESS#1
