Efficiency and recovery index of silicon of a diatomaceous Earth-based fertilizer in two soil types grown with sugarcane and maize

2021 ◽  
pp. 1-12
Author(s):  
Clístenes Williams Araújo do Nascimento ◽  
Fernando Bruno Vieira da Silva ◽  
Paula Renata Muniz Araújo ◽  
Josângela do Carmo Trezena de Araújo ◽  
Simone Aparecida da Silva Lins
2013 ◽  
Vol 37 (5) ◽  
pp. 1267-1275 ◽  
Author(s):  
Mônica Sartori de Camargo ◽  
Gabriela Rocha ◽  
Gaspar Henrique Korndörfer

Sugarcane is considered a Si-accumulating plant, but in Brazil, where several soil types are used for cultivation, there is little information about silicon (Si) fertilization. The objectives of this study were to evaluate the silicon availability, uptake and recovery index of Si from the applied silicate on tropical soils with and without silicate fertilization, in three crops. The experiments in pots (100 L) were performed with specific Si rates (0, 185, 370 and 555 kg ha-1 Si), three soils (Quartzipsamment-Q, 6 % clay; Rhodic Hapludox-RH, 22 % clay; and Rhodic Acrudox-RA, 68 % clay), with four replications. The silicon source was Ca-Mg silicate. The same Ca and Mg quantities were applied to all pots, with lime and/or MgCl2, when necessary. Sugarcane was harvested in the plant cane and first- and second-ratoon crops. The silicon rates increased soil Si availability and Si uptake by sugarcane and had a strong residual effect. The contents of soluble Si were reduced by harvesting and increased with silicate application in the following decreasing order: Q>RH>RA. The silicate rates promoted an increase in soluble Si-acetic acid at harvest for all crops and in all soils, except RA. The amounts of Si-CaCl2 were not influenced by silicate in the ratoon crops. The plant Si uptake increased according to the Si rates and was highest in RA at all harvests. The recovery index of applied Si (RI) of sugarcane increased over time, and was highest in RA.


2003 ◽  
Author(s):  
Roger S. Hamada ◽  
Velma Kameoka ◽  
Evelyn Yanagida ◽  
Claude M. Chemtob
Keyword(s):  

2008 ◽  
Vol 4 (1) ◽  
pp. 1-26
Author(s):  
Gábor Kalácska

Research was performed on the friction, wear and efficiency of plastic gears made of modern engineering polymers and their composites both in a clean environment (adhesive sliding surfaces) and in an environment contaminated with solid particles and dust (abrasive), with no lubrication at all. The purpose is to give a general view about the results of abrasive wear tests including seven soil types as abrasive media. At the first stage of the research silicious sand was applied between the meshing gears and the wear of plastic and steel gears was evaluated and analyzed from the point of different material properties (elongation at break, hardness, yield stress, modulus of elasticity) and its combinations. The different correlations between the experienced wear and material features are also introduced. At the second stage of the project the abrasive sand was replaced with different physical soil types. The abrasive wear of gears is plotted in the function of soil types. The results highlight on the considerable role of physical soil types on abrasive wear resistance and the conclusions contain the detailed wear resistance. The results offer a new tribology database for the operation and maintenance of agricultural machines with the opportunity of a better material selection according to the dominant soil type. This can finally result longer lifetime and higher reliability of wearing plastic/steel parts.


2010 ◽  
Vol 18 (2) ◽  
pp. 175-180
Author(s):  
Rajesh K. Verma ◽  
Dharam Veer Yadav ◽  
Chandra Pal Singh ◽  
Archna Suman ◽  
Asha Gaur

2019 ◽  
Author(s):  
Weksi Budiaji

This paper discusses the status of food security in Banten Province, Indonesia based on regional and city characteristics. Secondary data is used and is analyzed descriptively covering population dynamics, the population living in poverty, cereal production, disaster risk and soil types. Tangerang Region is found to have the largest population with the greatest number of people living in poverty among the regions and cities in Banten Province. Cereal production is dominated by the regions rather than the cities due to their vast area. Regarding arable land, flooding is the most threatening disaster in the major rice producing areas. In order to identify the distributions of regions and cities regarding food security, three indicator variables of food security dimensions are plotted, namely, cereal normative consumption, proportion of the population living in poverty, and proportion of malnourished babies. The three regions of Pandeglang Region, Lebak Region and Serang Region are grouped together in a less secure group.


1972 ◽  
Vol 1972 (13) ◽  
pp. 42-47
Author(s):  
Iwaho IWATA ◽  
Susumu SIRASAKA
Keyword(s):  

2010 ◽  
Vol 36 (5) ◽  
pp. 826-832
Author(s):  
Chuan-Deng YI ◽  
Li-Hong WANG ◽  
Xiao-Ping XIAO ◽  
Guang-Li YANG ◽  
Yue-Gao HU ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document