The Small Computer as A Co-ordinator of Medical Computing

1971 ◽  
Vol 9 (2) ◽  
pp. 167-173
Author(s):  
Denis Protti ◽  
A.J. Adams
Author(s):  
A.M.H. Schepman ◽  
J.A.P. van der Voort ◽  
J.E. Mellema

A Scanning Transmission Electron Microscope (STEM) was coupled to a small computer. The system (see Fig. 1) has been built using a Philips EM400, equipped with a scanning attachment and a DEC PDP11/34 computer with 34K memory. The gun (Fig. 2) consists of a continuously renewed tip of radius 0.2 to 0.4 μm of a tungsten wire heated just below its melting point by a focussed laser beam (1). On-line operation procedures were developped aiming at the reduction of the amount of radiation of the specimen area of interest, while selecting the various imaging parameters and upon registration of the information content. Whereas the theoretical limiting spot size is 0.75 nm (2), routine resolution checks showed minimum distances in the order 1.2 to 1.5 nm between corresponding intensity maxima in successive scans. This value is sufficient for structural studies of regular biological material to test the performance of STEM over high resolution CTEM.


Author(s):  
J. F. Hainfeld ◽  
J. S. Wall

Cost reduction and availability of specialized hardware for image processing have made it reasonable to purchase a stand-alone interactive work station for computer aided analysis of micrographs. Some features of such a system are: 1) Ease of selection of points of interest on the micrograph. A cursor can be quickly positioned and coordinates entered with a switch. 2) The image can be nondestructively zoomed to a higher magnification for closer examination and roaming (panning) can be done around the picture. 3) Contrast and brightness of the picture can be varied over a very large range by changing the display look-up tables. 4) Marking items of interest can be done by drawing circles, vectors or alphanumerics on an additional memory plane so that the picture data remains intact. 5) Color pictures can easily be produced. Since the human eye can detect many more colors than gray levels, often a color encoded micrograph reveals many features not readily apparent with a black and white display. Colors can be used to construct contour maps of objects of interest. 6) Publication quality prints can easily be produced by taking pictures with a standard camera of the T.V. monitor screen.


2020 ◽  
Vol 2020 (2) ◽  
pp. 22-25
Author(s):  
M.O. Redka ◽  
◽  
Yu.V. Kuts ◽  
O.E. Levchenko ◽  
O.D. Bliznyuk ◽  
...  

1972 ◽  
Vol PAS-91 (3) ◽  
pp. 1259-1265
Author(s):  
Floyd Gonzalez ◽  
Edward Gastineau
Keyword(s):  

2020 ◽  
Vol 41 (S1) ◽  
pp. s348-s349
Author(s):  
Hajime Kanamori ◽  
William Rutala ◽  
Maria Gergen ◽  
David Jay Weber

Background: The contaminated healthcare environment, including operating rooms (ORs), can serve as an important role in transmission of healthcare-associated pathogens. Studies are very limited regarding the level of contamination of ORs during the surgery of a patient on contact precautions and the risk to the next surgery patient after standard room cleaning and disinfection. Objective: Here, we investigated the microbial burden on the OR environment when patients on contact precautions receive surgery, and we assessed the impact of cleaning and disinfection on the contamination of OR environmental sites. Methods: This investigation was conducted in the ORs of an academic facility during an 8-month period. It involved 10 patients on contact precautions for multidrug-resistant pathogens, including methicillin-resistant Staphylococcus aureus (MRSA; n = 7); carbapenem-resistant Enterobacteriaceae (CRE) plus MRSA (n = 2); and vancomycin-resistant Enterococcus (VRE) plus MRSA (n = 1), who underwent surgery. Environmental sampling was performed at the following time points: (1) immediately before the surgical patient’s arrival in the OR, (2) after surgery but before the OR cleaning and disinfection, and (3) after the OR cleaning and disinfection. In total, 1,520 environmental samples collected from 15 OR sites for 10 surgical patients at 3 time points were analyzed. Relatedness among environmental MRSA isolates was determined by pulsed-field gel electrophoresis. Results: Overall, the mean CFUs of aerobes per Rodac plate (CFU/25 cm2) were 10.1 before patient arrival, 14.7 before cleaning and disinfection, and 6.3 after cleaning and disinfection (P < .0001, after cleaning and disinfection vs before cleaning and disinfection). Moreover, 7 environmental sites (46.7%) after cleaning and disinfection, including bed, arm rest, pyxis counter, floor (near, door side), floor (far, by door), steel counter (small, near bed), and small computer desk, had significantly lower mean counts of aerobes than before patient arrival or before cleaning and disinfection (Fig. 1). The mean CFUs of MRSA per Rodac plate (CFU/25 cm2) were 0.04 before patient arrival, 0.66 before cleaning and disinfection, and 0.08 after cleaning and disinfection (P = .0006, after cleaning and disinfection vs before cleaning and disinfection). Of environmental sites where MRSA was identified, 87.2% were on floors (41 of 47) and 19.1% were after cleaning and disinfection (9 of 47, 8 from floors and 1 from pyxis touchscreen). The A2/B2 MRSA strain was identified on different environmental sites (eg, floor, computer desk, counter) in various rooms (eg, OR2, OR10, and OR16), even after cleaning and disinfection (Fig. 2). Conclusions: Our study has demonstrated that the OR environment was contaminated with aerobic bacteria and MRSA after surgery and that MRSA persisted in the environment even after cleaning and disinfection. Enhanced environmental cleaning in the perioperative environment used for patients on isolation is necessary to prevent transmission of healthcare-associated pathogens in ORs.Funding: NoneDisclosures: Drs. Rutala and Weber are consultants to PDI (Professional Disposable International)


Sign in / Sign up

Export Citation Format

Share Document