Ferroelectric phase shifters and their performance in microwave phased array antennas

1995 ◽  
Vol 8 (1-2) ◽  
pp. 65-76 ◽  
Author(s):  
R. Babbitt ◽  
T. Koscica ◽  
W. Drach ◽  
L. Didomenico
Author(s):  
Aparna B. Barbadekar ◽  
Pradeep M. Patil

Abstract The paper proposes a system consisting of novel programmable system on chip (PSoC)-controlled phase shifters which in turn guides the beam of an antenna array attached to it. Four antennae forming an array receive individual inputs from the programmable phase shifters (IC 2484). The input to the PSoC-based phase shifter is provided from an optimized 1:4 Wilkinson power divider. The antenna consists of an inverted L-shaped dipole on the front and two mirrored inverted L-shaped dipoles mounted on a rectangular conductive structure on the back which resonates in the ISM/Wi-Fi band (2.40–2.48 GHz). The power divider is designed to provide the feed to the phase shifter using a beamforming network while ensuring good isolation among the ports. The power divider has measured S11, S21, S31, S41, and S51 to be −14, −6.25, −6.31, −6.28, and −6.31 dB, respectively at a frequency of 2.45 GHz. The ingenious controller is designed in-house using a PSoC microcontroller to regulate the control voltage of individual phase shifter IC and generate progressive phase shifts. To validate the calibration of the in-house designed control circuit, the phased array is simulated using $s_p^2$ touchstone file of IC 2484. This designed control circuit exhibits low insertion loss close to −8.5 dB, voltage standing wave ratio of 1.58:1, and reflection coefficient (S11) is −14.36 dB at 2.45 GHz. Low insertion loss variations confirm that the phased-array antenna gives equal amplitude and phase. The beamforming radiation patterns for different scan angles (30, 60, and 90°) for experimental and simulated phased-array antenna are matched accurately showing the accuracy of the control circuit designed. The average experimental and simulated gain is 13.03 and 13.48 dBi respectively. The in-house designed controller overcomes the primary limitations associated with the present electromechanical phased array such as cost weight, size, power consumption, and complexity in design which limits the use of a phased array to military applications only. The current study with novel design and enhanced performance makes the system worthy of the practical use of phased-array antennas for common society at large.


2013 ◽  
Vol 5 (5) ◽  
pp. 629-636
Author(s):  
Wei Shi ◽  
Jun Zhou ◽  
Zuping Qian ◽  
Ya Shen

Detailed analysis of the polarization tracking modules for Ku band active phased array antennas is presented. The proposed transmitter (14.0–14.5 GHz) and receiver (12.25–12.75 GHz) modules are based on the low temperature co-fired ceramic (LTCC) technique, containing orthogonal dual channels with different phases controlled by phase shifters. The effect of amplitude and phase inconsistency between two channels on polarization tracking performance is analyzed. The validity of the analysis is verified by the measurements of the manufactured prototypes. The measured patterns of the active phased array antenna are given to illustrate the effects of the modules on polarization agility, which may be used for Ku band satellite antennas on mobile terminals.


2000 ◽  
Vol 87 (9) ◽  
pp. 6908-6910
Author(s):  
Hoton How ◽  
Pin Shi ◽  
Carmine Vittoria ◽  
M. H. Champion ◽  
Leo C. Kempel ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document