Nonlinear vibration, stability, and bifurcation analysis of axially moving and spinning cylindrical shells

Author(s):  
Arash Mohamadi ◽  
Faramarz Ashenai Ghasemi ◽  
Majid Shahgholi
2019 ◽  
Vol 24 (11) ◽  
pp. 3514-3536
Author(s):  
Mohsen Tajik ◽  
Ardeshir Karami Mohammadi

In this paper, an Euler–Bernoulli model has been used for nonlinear vibration, stability, and bifurcation analysis of spinning twisted beams with linear twist angle, and with large transverse deflections, near the primary and parametric resonances. The equations of motion, in the case of pure single mode motion are analyzed by two methods: directly applying multiple scales method and using multiple scales method after discretization by Galerkin’s procedure. It is observed that the same final relations are obtained in the two methods. Effects of twist angle, damping ratio, longitudinal to transverse stiffness ratio, and eccentricity on the frequency responses are investigated. Then, the results are compared with the results obtained from Runge–Kutta numerical method on ODEs in a steady state, and confirmed with some previous research. Finally, the results show a good correlation, and it shows that with increasing the twist angle from 0 to 90°, the natural frequencies increase in the first two modes.


2013 ◽  
Vol 23 (03) ◽  
pp. 1330009 ◽  
Author(s):  
ALBERT C. J. LUO ◽  
MOZHDEH S. FARAJI MOSADMAN

In this paper, the analytical dynamics for singularity, switchability, and bifurcations of a 2-DOF friction-induced oscillator is investigated. The analytical conditions of the domain flow switchability at the boundaries and edges are developed from the theory of discontinuous dynamical systems, and the switchability conditions of boundary flows from domain and edge flows are presented. From the singularity and switchability of flow to the boundary, grazing, sliding and edge bifurcations are obtained. For a better understanding of the motion complexity of such a frictional oscillator, switching sets and mappings are introduced, and mapping structures for periodic motions are adopted. Using an eigenvalue analysis, the stability and bifurcation analysis of periodic motions in the friction-induced system is carried out. Analytical predictions and parameter maps of periodic motions are performed. Illustrations of periodic motions and the analytical conditions are completed. The analytical conditions and methodology can be applied to the multi-degrees-of-freedom frictional oscillators in the same fashion.


Sign in / Sign up

Export Citation Format

Share Document