Numerical Investigation of Fluid Flow, Characteristics of Thermal Performance and Enhancement of Heat Transfer of Corrugated Pipes with Various Configurations

AbstractPurpose: Numerical investigation was carried out to study the hydro-thermal characteristics in circular wavy microchannels (CWMCs) with sidewall rib. Thermal resistance and pressure drop penalty were compared with sinusoidal wavy microchannels (SWMCs) design. Parametric study on sidewall rib was also carried to minimize the pressure drop penalty and to achieve lower thermal resistance. Introducing sidewall rib in the CWMCs leads to the formation of more Deans vortices. This leads to an effective fluid mixing and augments the convective heat transfer. Design methodology/approach: A computational solid domain was created in SOLIDWORKS and the fluid domain was produced by circular arc profile for the entire length of heat sink. 3-D numerical investigation was carried out using ANSYS FLUENT software. Created computational domain was imported into ANSYS WORKBENCH. Meshing was executed in ANSYS mesh module. The computational domains were meshed using hexahedral elements adopting match control on both sides of microchannel (MC). The numerical investigation was carried out in the Re range from 100 to 300 with constant heat flux (50 W/cm2) applied at the bottom of the channel. Heat transfer and fluid flow characteristics were explained with velocity vectors, velocity contours and temperature contours. Findings: From numerical studies, it is concluded that CWMC with sidewall rib width (0.15 mm) leads to 33.6 % lower thermal resistance than SWMC with pressure drop penalty. Originality/Value: Present study is useful to identify the optimum deign to augment the heat dissipation performance of microchannel heat sink.

Download Full-text

Influence of fluid flow characteristics and heat transfer in a tube heat exchanger using H-shape inserts with circular ring

Journal of Engineering Research ◽

10.36909/jer.iccemme.15861 ◽

2021 ◽

Author(s):

Satyendra Singh ◽

◽

Tarun Joshi ◽

Himanshi Kharkwal ◽

◽

...

Keyword(s):

Heat Transfer ◽

Heat Flux ◽

Fluid Flow ◽

Heat Exchanger ◽

Thermal Performance ◽

Flow Characteristics ◽

Circular Ring ◽

Main Section ◽

Tube Heat Exchanger ◽

Fluid Flow Characteristics

The heat transfer and fluid flow characteristics in a tube heat exchanger using H-shape inserts with circular ring (CRWHS) has been done by computationally and experimentally. In this investigation parameters like ratio of the diameters and pitches are considered. The value of diameter and pitch ratios are (DR=0.8, 0.9), (PR=3, 4) respectively. The main section in which investigation was done is 1.5m long and the hydraulic diameter of the tube is 68.1mm. 1000 W/m2 heat flux was provided in the main section. Heat flux was constant throughout the investigation. Air is used as a working medium in which 6000 to 21000 Reynolds number was used for the investigation. The observation revealed that the increment in heat transfer rate is 4.56 times as compare to smooth tube for the circular ring with H-shape inserts. In case of DR=0.8 and PR=3, maximum thermal performance factor was obtain which is 3.24. In GIT the deviation in Nusselt number & friction factor is limited to ±0.4% & ±0.1% respectively. CFD analysis result comparisons with experimental one are presented in which the maximum deviations for thermal performance factor are limited to ±3.6%.

Download Full-text