scholarly journals Characterization of a CMOS pixel sensor for charged particle tracking

2021 ◽  
Vol 16 (12) ◽  
pp. P12016
Author(s):  
L. Li ◽  
L. Zhang ◽  
J.N. Dong ◽  
J. Liu ◽  
M. Wang

Abstract A prototype of the CMOS pixel sensor named Supix-1 has been fabricated and tested in order to investigate the feasibility of a pixelated tracker for a proposed Higgs factory, namely, the Circular Electron-Positron Collider (CEPC). The sensor, taped out with a 180 nm CMOS Image Sensor (CIS) process, consists of nine different pixel arrays varying in pixel pitches, diode sizes and geometries in order to study the particle detection performance of enlarged pixels. The test was carried out with a 55Fe radioactive source. Two soft X-ray peaks observed were used to calibrate the charge to voltage factor of the sensor. The pixel-wise equivalent noise charge, charge collection efficiency and signal-to-noise ratio were evaluated. A reconstruction method for clustering pixels of a signal has been developed and the cluster-wise performance was studied as well. The test results show that pixels with the area as large as of 21 × 84 μm have satisfactory noise level and charge collection performance, meeting general requirements for a pixel sensor. This contribution demonstrates that the CMOS pixel sensor with enlarged pitches, using the CIS technology, can be used in tracking for upcoming collider detectors akin to the CEPC.

2009 ◽  
Vol 24 (4) ◽  
pp. 1361-1367 ◽  
Author(s):  
M.C. Duff ◽  
D.B. Hunter ◽  
A. Burger ◽  
M. Groza ◽  
V. Buliga ◽  
...  

Synthetic Cd1–xZnxTe or “CZT” crystals are highly suitable for γ-spectrometers operating at room temperature. Secondary phases (SP) within CZT, presumed to be Te metal, have detrimental impacts on the charge collection efficiency of fabricated device. Using analytical techniques rather than arbitrary theoretical definitions, we identify two SP morphologies: (i) many void, 20-μm “negative” crystals with 65-nm nanoparticle residues of Si, Cd, Zn, and Te and (ii) 20-μm hexagonal-shaped bodies, which are composites of metallic Te layers with cores of amorphous and polycrystalline CZT material that surround the voids.


Author(s):  
Diana Bachiller-Perea ◽  
Javier Garcia Lopez ◽  
Maria del Carmen Jimenez-Ramos ◽  
Faustino Gomez ◽  
Celeste Fleta ◽  
...  

2013 ◽  
Vol 8 (03) ◽  
pp. C03023-C03023 ◽  
Author(s):  
M Jakubek ◽  
J Jakubek ◽  
J Zemlicka ◽  
M Platkevic ◽  
V Havranek ◽  
...  

2021 ◽  
Vol 23 (2) ◽  
pp. 68-75
Author(s):  
Altukhov A.A. ◽  

The results of experiments on the study of polarization phenomena and the charge collection efficiency in test structures of diamond ionizing radiation detectors using diamond plates of various types, including single-crystal NRNT-type, single-crystal CVD-type, as well as polycrystalline type, when exposed to alpha-radiation with an energy of 5.5 MeV are presented. Studies have demonstrated the existence of a number of problems with the device quality of diamond plates that affect the performance of spec-trometric-type detectors.


Sign in / Sign up

Export Citation Format

Share Document