Existing approaches which allow to reduce the settlement unevenness of buildings and structures have their own advantages and disadvantages. One of the promising methods for reducing shallow foundations the settlement unevenness, which are based on soft dust and clay soil, is the building or its part lowering. The effect is achieved by drilling vertical wellbores in the immediate proximity to the existing foundation from the side of the least settlement. At different times, domestic and foreign scientists were engaged in to the methods of horizontal and inclined drilling of wellbores, an important issue, when applying this technology, is the determination of drilling parameters, the influence of soil characteristics and the stress state of the soil around the well, on the roll reduction process. The article considers the influence of the soil strength characteristics on the stress state of the soil which are surrounding the wellbore, and the effect of the drilled wellbore radius on the formation of the critical state regions. The analytical solution is based on the use of the well-known relationship for determining the stress state around the well during pressiometric tests. From this ratio, tangential and radial stresses are determined, which are then checked according to the condition of the law of strength, thereby forming a picture of the stress state around the well. According to the presented methodology, the stress state of the soil around the wells was calculated, which allows calculating the zones of soil destruction and thereby determining the parameters of the wells and the geometry of their location depending on the goals, when regulating the sediment of slab foundations.
Determination of the stress state in the deformation zone under local loading
