Short-Term Oxidation Behavior, Microstructure Evolution and Compression Behavior of Nickel-Based Superalloy GH4037 in Solid and Semi-Solid States

Semi-solid processing combines the advantages of traditional forging and casting methods, so it has received much attention recently. However, the research on semi-solid behaviors of Nickel-based superalloys has been rarely reported. In order to investigate the behaviors of Nickel-based superalloy at solid and semi-solid states, oxidation experiments, isothermal treatment experiments and deformation experiments of GH4037 alloy were studied. Short-term oxidation experiments of GH4037 alloy were carried out at a solid temperature (1200 °C) and a semi-solid temperature (1360 °C). The results indicated that the oxides formed at 1200 °C were mainly composed of TiO2, Cr2O3 and a small amount of spinels NiCr2O4, while the oxides formed at 1360 °C consisted of the spinels of NiCr2O4, NiWO4 and NiMoO4 besides TiO2 and Cr2O3. Microstructure evolution of GH4037 alloy after semi-solid isothermal treatment at 1370 °C and 1380 °C was studied. The results indicated that semi-solid microstructures consisted of equiaxed solid grains and liquid phases. The average grains size and shape factor of solid grains were affected by melting mechanism and grain growth mechanism. Compression behaviors of GH4037 alloy after compressed at 1200 °C and 1360 °C were investigated. The results indicated that the flow stress of 1360 °C decreased significantly compared to that of 1200 °C. The deformation zones in the specimens were divided into three parts: the difficult deformation zone, the large deformation zone, and the free deformation zone. At 1200 °C, the deformation mechanism was plastic deformation mechanism. At 1360 °C, sliding between solid particles (SS), liquid flow (LF), flow of liquid incorporating solid particles (FLS), plastic deformation of solid particles (PDS) coexisted in the compression specimen.

Method for Calculating the Shape of Rolls for Helical Rolling

The paper is devoted to solving the problem of determining the shape of the rolls of helical rolling mills, depending on the specified profile of the deformation zone. A universal calculation method has been proposed, thanks to which it is possible to determine the shape of the working surface of a roll for all types of helical rolling mills (with mushroom-shaped, cup-shaped, barrel-shaped and disc rolls), any relative arrangement of the rolling axis and rolls axes, and various locations of the deformation zone on the rolling axis. The proposed method is implemented as a standalone exe-application with a simple intuitive interface. The application allows you to output the calculation results into txt-files, which can then be imported into CAD systems to create 3D roll models.

Energy-efficient omd processes with complex local loading for the production of machine parts with a given level of properties

The article discusses some new energy-efficient metal forming processes (PMD) with complex local loading of the deformation zone for the production of machine parts with a given level of properties. The place of such processes in the aggregate of all OMD technologies is shown, and their classification is given. The initial data of numerical mathematical modeling of the specified class of processes for a particular case are given, the features of the stress-strain state of the metal in the deformation zone are revealed. In the study, from a theoretical point of view, one of the important practical aspects of these technologies is considered: the effect of the value of axial compression on the shape and size of the deformation zone arising from the action of local loading of the workpiece.

Accurate Strain Field Measurement During Strip Rolling by Exploiting Recurring Material Motion with Time-Integrated Digital Image Correlation

Background 95% Of all metals and alloys are processed using strip rolling, explaining the great number of existing strip rolling optimization models. Yet, an accurate in-situ full-field experimental measurement method of the deformation, velocity and strain fields of the strip in the deformation zone is lacking. Objective Here, a novel time-Integrated Digital Image Correlation (t-IDIC) framework is proposed and validated that fully exploits the notion of continuous, recurring material motion during strip rolling. Methods High strain accuracy and robustness against unavoidable light reflections and missing speckles is achieved by simultaneously correlating many (e.g. 200) image pairs in a single optimization step, i.e. each image pair is correlated with the same average global displacement field but is multiplied by a unique velocity corrector to account for differences in material velocity between image pairs. Results Demonstration on two different strip rolling experiments revealed previously inaccessible subtle changes in the deformation and strain fields due to minor variations in pre-deformation, elastic recovery, and geometrical irregularities. The influence of the work roll force and entry/exit strip tension has been investigated for strip rolling with an industrial pilot mill, which revealed unexpected non-horizontal material feed. This asymmetry was reduced by increasing the entry strip tension and rolling force, resulting in a more symmetric strain distribution, while increased distance between the neutral and entry point was found for a larger rolling force. Conclusions The proposed t-IDIC method allows for robust and accurate characterization of the strip’s full-field behavior of the deformation zone during rolling, revealing novel insights in the material behavior.

A simplified mathematical model for total temperature rise calculation in non-oriented silicon steel cold rolling deformation zone

In tandem cold rolling, the control of the temperature of high-grade non-oriented silicon steel is a difficult problem for its large deformation resistance and the preheating procedure before rolling. And it is complicated to calculate the total temperature rise of rolling deformation zone due to the comprehensive influence of the plastic deformation heat, the friction heat and the contact heat loss. So, to precisely calculate the total temperature rise, firstly, based on the four classical cold rolling force formulas, the initial total temperature rise calculation models are established correspondingly by theoretically analyzing the temperature rise of deformation heat, the temperature rise of friction heat and the temperature drop of contact heat loss; then, the model based on the improved Lian rolling force formula is adopted, which leads to calculated best matching the measured temperature; finally, considering the complex formula calculation of the initial model, based on the influences of different rolling parameters on the total temperature rise, a simplified model for convenient calculation is proposed by the nonlinear regression analysis of the initial model calculation results and main rolling parameters, which is convenient for the actual application by the field technicians.

Sheet Bulk Forming of Thin-Walled Components with External Gearing through Upsetting Using Controllable Deformation Zone Method

Sheet-bulk metal forming (SBMF) is a promising process for manufacturing complex sheet components with functional elements. In this study, the entire forming process for a typical thin-walled component with external gearing is investigated, including sheet forming and bulk forming processes. Deep drawn cups are prepared during sheet forming; subsequently, upsetting is performed on the sidewall to form external gearing. The upsetting method performed is known as upsetting with a controllable deformation zone (U-CDZ). Compared with the conventional upsetting method, a floating counter punch with a counter force is used in the U-CDZ method such that the forming mechanism is changed into the accumulation of the deformation zone instead of deformation throughout the entire sidewall. The effects of the counter force and material flow are investigated to understand the mechanism. The forming quality, i.e., the formfilling and effective strain distribution, improved, whereas a high forming load is avoided. In addition, a punch with a lock bead is used to prevent folding at the inner corner during the experiment.

Mechanism of and Key Technologies for Copper Bonding in the Hot Rolling of SCR Continuous Casting and Rolling

In the process of copper alloy hot continuous rolling, the problem of copper sticking to the roller seriously affects the surface quality, performance, and service life of the copper products. Roll sticking occurs as the adhesion energy of Cu is lower than that of Fe and the Fe-Cu interface, and the severe surface deformation which forces the copper into direct contact with the roll during the process of profile rolling. Based on the copper deformation law and adhesion phenomenon in the hot continuous rolling process, a rolling deformation model and roll copper adhesion model or copper alloy hot continuous rolling were established, and their simulation was realized using finite element software. Through finite element modeling of the hot rolling deformation zone, the distribution of the temperature, contact normal stress, and exposure rate in the hot rolling deformation zone were obtained, which were consistent with the actual roll adhesion phenomenon and copper adhesion position. To address the copper sticking behavior of the rolls, the process optimization method of matching the motor speed with the elongation coefficient (the 1# and 2# motor speeds were adjusted to 1549 r/min and 1586 r/min, respectively), adjusting the roll gap to 7.9 mm, and increasing the number and pressure of roll spray nozzles were put forward, which effectively solved the problem of copper sticking to the roll, significantly improved the surface quality of the copper and the service life of the roll, and can be used in production.

Products stress during breaking-down with thinning-out of the pipe stock element

Based on the data obtained during the simulation of breaking-down and thinning-out simultaneously of the pipe stock element, the stress state of pipe jackets in the deformation zone has been evaluated. The influence of the contact friction magnitude, the tool conicity and the degrees of deformation on the maximum stress values and their heterogeneity have been determined.

Optimization of Controllable Deformation Zone And Die Wear of Aluminum Crown Forgings For Shock Absorber Assembly

In this research, numerical analysis, response surface method (RSM) and experiments are used to investigate and verify the hot forging process for manufacturing aluminum crown forgings for shock absorber assembly. First, establish the computer aided design (CAD) model of the die and the billet, and simulate it from the finite element method (FEM). Second, a new preforming die was designed with a preformed dressing of controllable deformation zone (CDZ) by the CAD software. Third, numerical simulation was combined with RSM to optimize the processing parameters with the aim of minimizing the die wear while the integrity of forgings should be prioritized preserved. According to RSM, the billet size and preformed dressing of CDZ are important factors affecting the distance between die and workpiece (C). The optimal design factor of the preforming die: billet diameter (D), billet length (L) and flash design (F) are 40 mm, 205 mm and CDZ 1, respectively. Through the results of FEM, this study describes the distribution of microscopic grain flow lines are highly related to forming, stress, strain, and temperature as well as die design such as CDZ in preformed dressing. In order to accurately verify that the parameters analyzed by the RSM, both numerical analysis and physical experiments are carried out and optimal scheme exhibit reasonable consistency.