scholarly journals Research on the deformation and failure pattern of rock masses in dam foundations controlled by continuous gently inclined and discontinuous steeply inclined unconformities

2020 ◽  
Vol 570 ◽  
pp. 062027
Author(s):  
Chun Tan ◽  
Dong-he Ma ◽  
Zhong-fu Liu ◽  
Yin Gao ◽  
Xin-chuan Xu ◽  
...  
Keyword(s):  
Failure Pattern ◽  
Rock Masses ◽  
Deformation And Failure ◽  
Dam Foundations

scholarly journals Key Factors Affecting the Deformation and Failure of Surrounding Rock Masses in Large-Scale Underground Powerhouses

2020 ◽  
Vol 2020 ◽  
pp. 1-20
Author(s):  
Meng Wang ◽  
Jia-wen Zhou ◽  
An-chi Shi ◽  
Jin-qi Han ◽  
Hai-bo Li
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Surrounding Rock ◽  
Rock Masses ◽  
Affecting Factors ◽  
Key Factors ◽  
Underground Powerhouse ◽  
Deformation And Failure ◽  
Factors Affecting ◽  
Geological Conditions

The stability of the surrounding rock masses of underground powerhouses is always emphasized during the construction period. With the general trends toward large-scale, complex geological conditions and the rapid construction progress of underground powerhouses, deformation and failure issues of the surrounding rock mass can emerge, putting the safety of construction and operation in jeopardy and causing enormous economic loss. To solve these problems, an understanding of the origins and key affecting factors is required. Based on domestic large-scale underground powerhouse cases in the past two decades, key factors affecting the deformation and failure of the surrounding rock mass are summarized in this paper. Among these factors, the two most fundamental factors are the rock mass properties and in situ stress, which impart tremendous impacts on surrounding rock mass stability in a number of cases. Excavation is a prerequisite of surrounding rock mass failure and support that is classified as part of the construction process and plays a pivotal role in preventing and arresting deformation and failure. Additionally, the layout and structure of the powerhouse are consequential. The interrelation and interaction of these factors are discussed at the end of this paper. The results can hopefully advance the understanding of the deformation and failure of surrounding rock masses and provide a reference for design and construction with respect to hydroelectric underground powerhouses.

scholarly journals Mechanical Characteristics and Failure Modes of Low-Strength Rock Samples with Dissimilar Fissure Dip Angles

2021 ◽  
Author(s):  
Y L Wang ◽  
D S Liu ◽  
K Li ◽  
X M Hu ◽  
D Chen
Keyword(s):  
Rock Mass ◽  
Mechanical Characteristics ◽  
Failure Modes ◽  
High Strength ◽  
Rock Masses ◽  
Deformation And Failure ◽  
Deformation Features ◽  
Low Strength ◽  
Dip Angle ◽  
Strength Rock

The mechanical characteristics and failure modes of low-strength rock sample with various fissure dip angles were investigated by conventional uniaxial compression test and three-dimensional (3D) crack reconstruction. The results indicated that compared with high-strength rock masses, cracks had different influences on the low-strength rock mass mechanical deformation features. Thereinto, the dip angle of fissures can cause post-peak failure stage of stress-strain curve change from swift decline to multi-step down, showing obvious ductility deformation and failure characteristics. Peak strength and elastic modulus owned an anti-S-shaped growth tendency with the growth of fissure dip angle, which was positively correlated and greatest subtle to the fissure dip angle α < 21° and α > 66.5°. The axial peak strain reduced first and enlarged rapidly with growing fissure dip angle, suggesting a V-shaped change trend. Increasing the fissure dip angle will change the sample failure mode, experienced complete tensile failure to tensile-shear composite failure, and ultimately to typical shear failure. Also, the crack start angle decreased with enlarging fissure dip angle, larger than that the high-strength rock mass fissure dip angle. The above research findings can complement and improve the study of fissured rock masses.

scholarly journals Study on the Fracture Distribution Law and the Influence of Discrete Fractures on the Stability of Roadway Surrounding Rock in the Sanshandao Coastal Gold Mine, China

2019 ◽  
Vol 11 (10) ◽  
pp. 2758
Author(s):  
Gang Liu ◽  
Fengshan Ma ◽  
Haijun Zhao ◽  
Guang Li ◽  
Jiayuan Cao ◽  
...  
Keyword(s):  
Field Investigation ◽  
Surrounding Rock ◽  
Gold Mine ◽  
Rock Masses ◽  
Distribution Law ◽  
Deformation And Failure ◽  
Roadway Stability ◽  
The Stability ◽  
Fracture Distribution ◽  
Matlab Programming

Cracks are critical for the deformation and failure of rock masses, but the effects of real cracks are rarely considered when evaluating the stability and safety of practical engineering. This paper presents a study on the application of fractures in the Sanshandao Gold Mine. Field investigation and statistical analysis methods were adopted to obtain the distribution laws of the cracks. Laboratory tests, MATLAB programming, and simulation using the software, GDEM (Gdem Technology, Beijing, China, Co., Ltd.), were employed to study the mechanical behaviors of rock masses with real fractures after excavation. The main results are as follows: (1) Three sets of highly discrete cracks were developed in the study area. Their inclination and dip can be approximately considered to follow a Gaussian distribution or uniform distribution. They had close ties to the three faults developed in the mining area. (2) Compared with the model that did not consider cracks and the model processed by the equivalence idea, the surrounding rock deformation caused by excavation of the model that considered real cracks was larger than that of the former and smaller than that of the latter. However, its influence range was larger than that of the other two models. The results show that it is reasonable to use three sets of discrete cracks to characterize the fracture distribution of the surrounding rock. In the evaluation of roadway stability, it is not advisable to use the equivalence method to deal with all the cracks. Considering a part of the cracks that are compatible with the size of the calculation model, a relatively accurate evaluation can be obtained in terms of the deformation, failure, and permeability changes of the surrounding rock.

Sign in / Sign up

Export Citation Format

Share Document