scholarly journals Vertical Axis Wind Turbine Performance Enhancement Via Utilizing the Repulsive Characteristics of Permanent Magnets

2021 ◽  
Vol 1013 ◽  
pp. 012026
Author(s):  
Sandesh Hegde ◽  
C G Ramachandra
Keyword(s):  
Wind Turbine ◽  
Permanent Magnets ◽  
Performance Enhancement ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Turbine Performance

scholarly journals Design of Vertical Axis Wind Turbine Darrieus Type (H- Darrieus Rotor) of 0.20 KW from the Software Topsolid

2020 ◽  
pp. 52-70
Author(s):  
Hagninou E. V. Donnou ◽  
Drissa Boro ◽  
Donald Abode ◽  
Brunel Capo-Chichi ◽  
Aristide B. Akpo
Keyword(s):  
Wind Turbine ◽  
Permanent Magnets ◽  
Aerodynamic Force ◽  
Low Cost ◽  
Coastal Region ◽  
Vertical Axis ◽  
Digital Design ◽  
Three Dimensions ◽  
Geometrical Shape ◽  
Vertical Axis Wind Turbine

The design of a vertical axis wind turbine (Darrieus type) adapted to the site of Cotonou in the coastal region of Benin was investigated. The statistical study of winds based on the Weibull distribution was carried out on hourly wind data measured at 10 m above the ground by the Agency for the Safety of Air Navigation in Africa and Madagascar (ASECNA) over the period from January 1981 to December 2014. The geometrical and functional parameters of the wind turbine were determined from different models and aerodynamic approaches. The digital design and assembly of the wind turbine components were carried out using the TOPSOLID software. The designed wind turbine has a power of 200W. It is equipped with a synchronous generator with permanent magnets and has three wooden blades with NACA 0015 profile. The optimal coefficient of lift and drag were estimated respectively at 0.7832 and 0.01578. The blades are characterized by an optimum angle of attack estimated at 6.25° with a maximum fineness of 49.63. Their length is 4 m and the maximum thickness is estimated at 0.03 m with a chord of 0.20 m. The volume and mass are respectively equal to 0.024 m3 and 36 kg. The aerodynamic stall occurs at an attack angle of 14.25°. The aerodynamic force exerted on these blades is estimated to be 240 N. The aerodynamic stresses exerted on the rotor are estimated at 15 864 504 Pa and the solidity at 0.27. The efficiency of the wind turbine is 0.323. From TOPSOLID, the geometrical shape of each component of the wind turbine is represented in three dimensions. The assembly allowed to visualizing the wind turbine after export via its graphical interface. The quantity of annual energy produced by the wind turbine was estimated at 0.85 MWh. This study is the first to be carried out in the study area and could reduce the technological dependence of vertical axis wind turbines and their import for low cost energy production.

Investigation of vertical axis wind turbine airfoil performance in rain

2017 ◽  
Vol 232 (2) ◽  
pp. 181-194 ◽  
Author(s):  
Zhenlong Wu ◽  
Yihua Cao
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Meteorological Condition ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Turbine Performance ◽  
Practical Design ◽  
Wind Turbine Airfoil ◽  
Naca 0015

Rainfall is a common meteorological condition that wind turbines may encounter and by which their performance may be affected. This paper comprehensively investigates the effects of rainfall on a NACA 0015 airfoil which is commonly used in vertical axis wind turbines. A CFD-based Eulerian–Lagrangian multiphase approach is proposed to study the static, rotating, and oscillating performances of the NACA 0015 airfoil in rainy conditions. It is found that for the different airfoil movements, the airfoil performance can seriously be deteriorated in the rain condition. Rain also causes premature boundary layer separations and more severe flow recirculations than in the dry condition. These findings seem to be the first open reports on rain effects on wind turbine performance and should be of some significance to practical design.

Investigation of Self-Starting Capability of Vertical Axis Wind Turbines Using a Computational Fluid Dynamics Approach

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Alexandrina Untaroiu ◽  
Houston G. Wood ◽  
Paul E. Allaire ◽  
Robert J. Ribando
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Mesh Deformation ◽  
Operating Speed ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
Turbine Performance

Vertical axis wind turbines have always been a controversial technology; claims regarding their benefits and drawbacks have been debated since the initial patent in 1931. Despite this contention, very little systematic vertical axis wind turbine research has been accomplished. Experimental assessments remain prohibitively expensive, while analytical analyses are limited by the complexity of the system. Numerical methods can address both concerns, but inadequate computing power hampered this field. Instead, approximating models were developed which provided some basis for study; but all these exhibited high error margins when compared with actual turbine performance data and were only useful in some operating regimes. Modern computers are capable of more accurate computational fluid dynamics analysis, but most research has focused on horizontal axis configurations or modeling of single blades rather than full geometries. In order to address this research gap, a systematic review of vertical axis wind-power turbine (VAWT) was undertaken, starting with establishment of a methodology for vertical axis wind turbine simulation that is presented in this paper. Replicating the experimental prototype, both 2D and 3D models of a three-bladed vertical axis wind turbine were generated. Full transient computational fluid dynamics (CFD) simulations using mesh deformation capability available in ansys-CFX were run from turbine start-up to operating speed and compared with the experimental data in order to validate the technique. A circular inner domain, containing the blades and the rotor, was allowed to undergo mesh deformation with a rotational velocity that varied with torque generated by the incoming wind. Results have demonstrated that a transient CFD simulation using a two-dimensional computational model can accurately predict vertical axis wind turbine operating speed within 12% error, with the caveat that intermediate turbine performance is not accurately captured.

scholarly journals Experimental Study of Vertical Axis Wind Turbine Performance under Vibration

2021 ◽  
Vol 1 (2) ◽  
pp. 177-185
Author(s):  
Md Rasel Sarkar ◽  
Sabariah Julai ◽  
Mst Jesmin Nahar ◽  
Moslem Uddin ◽  
Mahmudur Rahman ◽  
...  
Keyword(s):  
Power Generation ◽  
Experimental Study ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Dynamic Characteristics ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine ◽  
Flow Uniformity ◽  
Aerodynamic Forces ◽  
Turbine Performance

An experimental study was conducted to study the effects of flow uniformity on vibration and power generation of a small vertical axis wind turbine (VAWT). Previous studies have confirmed that one of the sources of vibration in the turbine is due to aerodynamic forces, which are due to incident wind. Firstly, understanding vibration is essential before proceeding to the measurements. In this experiment, further understand the vibrations of the turbine in operation, the operating deflection shape (ODS) technique was used. A wind tunnel and flow conditioner were fabricated. Experimental modal analysis (EMA) was conducted, and the dynamic characteristics are gathered. The ODS was conducted for operating the turbine at different speeds, with and without the flow conditioner. Results from EMA and ODS are correlated to explain the behavior of structures. In conclusion, the flow conditioner tested did have a big impact on the response of the structure in terms of vibration up to 30% indifference, but not so much in power generated about 2% indifference.

Sign in / Sign up

Export Citation Format

Share Document