A Method of the Voronoi Seabed Sedimentary Domain Boundary Reconstruction

Lanthanum aluminate(LaAlO3) single crystal as a substrate for high Tc superconducting film has attracted attention recently. We report here a transmission electron microscopy(TEM) study of the crystal structure and phase transformation of LaAlO3 by using Philips EM420 and EM430 microscopes. Single crystals of LaAlO3 were investigated first by optical microscope. Stripe-shaped domains of mm size are clearly seen(Fig.1a), and 90° domain boundary is also obvious. TEM specimens were prepared by mechanical grinding and polishing followed by ion-milling.Fig.lb shows μm size stripe domains of LaAlO3. Convergent beam electron diffraction patterns (CBED) from single domain were taken.Fig. 2a and Fig. 2c are [001] zone axis patterns which show a 4mm symmetry, and the (200) dark field of this zone axis gives 2mm symmetry(fig.2b). Therefore the point group of this crystal is either 4/mmm or m3m. The projection of the first order Laue zone(FOLZ) reflections on zero layer (fig. 2c) shows that the unit cell is face centered. A tetragonal unit ceil is chosen, with a=0.532nm and c=0.753nm, c being determined from the FOLZ ring diameter.

Download Full-text

On Optimal Control Problem of Elliptical Equation Coefficients with Integral Qualitative Criterion Along the Domain Boundary

Journal of Automation and Information Sciences ◽

10.1615/jautomatinfscien.v48.i12.40 ◽

2016 ◽

Vol 48 (12) ◽

pp. 37-47

Author(s):

Rafig Kalandar ogly Tagiyev ◽

Rena Sattar kyzy Kasymova

Keyword(s):

Optimal Control ◽

Optimal Control Problem ◽

Control Problem ◽

Domain Boundary ◽

Elliptical Equation ◽

Qualitative Criterion

Download Full-text

Faculty Opinions recommendation of Developmentally regulated activation of a SINE B2 repeat as a domain boundary in organogenesis.

Faculty Opinions – Post-Publication Peer Review of the Biomedical Literature ◽

10.3410/f.1088947.542080 ◽

2007 ◽

Author(s):

Peter Scambler

Keyword(s):

Domain Boundary ◽

Developmentally Regulated

Download Full-text

SIMULATION OF NEARSHORE WAVES AND CURRENTS ALONG SALALAH COAST (OMAN) DURING THE TROPICAL CYCLONE ARB01

Proceedings of International Conference "Managinag risks to coastal regions and communities in a changinag world" (EMECS'11 - SeaCoasts XXVI) ◽

10.21610/conferencearticle_58b43151d336a ◽

2017 ◽

Author(s):

AbdAlla M. AbdAlla ◽

Abkar A. Iraqi ◽

Magdy M. Farag ◽

...

Keyword(s):

Tropical Cyclone ◽

Domain Boundary ◽

Circulation Model ◽

Shielding Effect ◽

Strong Current ◽

Waves And Currents ◽

Wave Heights ◽

Nearshore Waves ◽

Flood Period ◽

Significant Wave Heights

Sea level and wave data at Salalah coast (Oman) were used to simulate nearshore waves and current during the tropical cyclone ARB01 (9 May2002). STWAVE model (Steady State Spectral Wave) was applied for nearshore wave simulation, while M2D model ((Two-Dimensional Depth Averaged circulation model) was used to simulate nearshore current. The results of simulations (taking into account the mutual effects of both current and waves) showed that: The significant wave heights generally decrease from about 6m at the domain boundary to about 1 m close to the coast. The wave heights during the ebb period were higher than that during the flood period by about 1.5m. Along Salalah coast, higher waves were found along the eastern side of the domain. This is because the shielding effect of breakwater, which protect the western part of the coast from high waves. Relatively Strong current with values up to 1.5 ms-1 were found in the nearshore region during both ebb and flood periods. The M2D model results also showed cyclonic circulations during these periods which help in the renewal of harbor waters. Generally, the model results showed good agreements with observations in the investigated area.

Download Full-text

A Time-Dependent Strange Term Arising in Homogenization of an Elliptic Problem with Rapidly Alternating Neumann and Dynamic Boundary Conditions Specified at the Domain Boundary: The Critical Case

Doklady Mathematics ◽

10.1134/s106456242002009x ◽

2020 ◽

Vol 101 (2) ◽

pp. 96-101

Author(s):

J. I. Díaz ◽

D. Gómez-Castro ◽

T. A. Shaposhnikova ◽

M. N. Zubova

Keyword(s):

Boundary Conditions ◽

Elliptic Problem ◽

Critical Case ◽

Domain Boundary ◽

Time Dependent ◽

Dynamic Boundary Conditions ◽

Dynamic Boundary

Download Full-text

TopDomain: Exhaustive Protein Domain Boundary Metaprediction Combining Multisource Information and Deep Learning

Journal of Chemical Theory and Computation ◽

10.1021/acs.jctc.1c00129 ◽

2021 ◽

Author(s):

Daniel Mulnaes ◽

Pegah Golchin ◽

Filip Koenig ◽

Holger Gohlke

Keyword(s):

Deep Learning ◽

Domain Boundary ◽

Protein Domain

Download Full-text

Three-Dimensional Elastodynamic Analysis Employing Partially Discontinuous Boundary Elements

Algorithms ◽

10.3390/a14050129 ◽

2021 ◽

Vol 14 (5) ◽

pp. 129

Author(s):

Yuan Li ◽

Ni Zhang ◽

Yuejiao Gong ◽

Wentao Mao ◽

Shiguang Zhang

Keyword(s):

Side Effect ◽

Domain Boundary ◽

Three Dimensional ◽

Boundary Integral ◽

Integration Scheme ◽

Computational Accuracy ◽

Time Step ◽

Corner Points ◽

Discontinuous Elements ◽

The Time Domain

Compared with continuous elements, discontinuous elements advance in processing the discontinuity of physical variables at corner points and discretized models with complex boundaries. However, the computational accuracy of discontinuous elements is sensitive to the positions of element nodes. To reduce the side effect of the node position on the results, this paper proposes employing partially discontinuous elements to compute the time-domain boundary integral equation of 3D elastodynamics. Using the partially discontinuous element, the nodes located at the corner points will be shrunk into the element, whereas the nodes at the non-corner points remain unchanged. As such, a discrete model that is continuous on surfaces and discontinuous between adjacent surfaces can be generated. First, we present a numerical integration scheme of the partially discontinuous element. For the singular integral, an improved element subdivision method is proposed to reduce the side effect of the time step on the integral accuracy. Then, the effectiveness of the proposed method is verified by two numerical examples. Meanwhile, we study the influence of the positions of the nodes on the stability and accuracy of the computation results by cases. Finally, the recommended value range of the inward shrink ratio of the element nodes is provided.

Download Full-text