Morphostructural Characterization of the Heterogeneous Rhodolith Bed at the Marine Protected Area “Capo Carbonara” (Italy) and Hydrodynamics

Mediterranean rhodolith beds are priority marine benthic habitats for the European Community, because of their relevance as biodiversity hotspots and their role in the carbonate budget. Presently, Mediterranean rhodolith beds typically occur within the range of 30–75 m of water depth, generally located around islands and capes, on flat or gently sloping areas. In the framework of a collaboration between the University of Milano-Bicocca and the Marine Protected Area “Capo Carbonara” (Sardinia, Italy), video explorations and sampling collections in three selected sites revealed the occurrence of a well developed and heterogeneous rhodolith bed. This bed covers an area >41 km2 around the cape, with live coverage ranging between 6.50 and 55.25%. Rhodoliths showed interesting morphostructural differences. They are small compact pralines at the Serpentara Island, associated with gravelly sand, or bigger boxwork at the Santa Caterina shoal associated with sand, whereas branches are reported mostly in the Is Piscadeddus shoal, associated with muddy sand. Both in the Santa Caterina shoal and the Serpentara Island, rhodoliths generally show a spheroidal shape, associated with a mean value of currents of 4.3 and 7.3 cm/s, respectively, up to a maximum of 17.7 cm/s at Serpentara, whereas in the Is Piscadeddus shoal rhodolith shape is variable and current velocity is significantly lower. The different hydrodynamic regime, with a constant current directed SW, which deviates around the cape towards E, is responsible for such morphostructural heterogeneity, with the site of the Serpentara Island being the most exposed to a constant unidirectional and strong current. We can associate current velocity with specific rhodolith morphotypes. The morphostructural definition of the heterogeneity of rhodoliths across large beds must be considered for appropriate management policies.

Pengaruh VariasiArus dan Posisi Pengelasan SMAW terhadap Sifat Mekanik Baja ST 37

The purpose of this study was to determine the difference in the value of tensile strength, impact and microstructure test results on ST 37 steel plates due to variations in current strength of 80 A, 85 A and 90 A and 1G, 2G and 3G welding positions. The results of this study show the value of Max.load, current strength of 80 A 3G welding position gets the highest value of 5650 kgf, value of Tinsile strength, current strength of 80 A 3G welding position gets the highest value of 44.78 (kgf/mm2), then the strain value, the current strength of 80 A for the 3G welding position gets the highest value of 0.9% and the value of the modulus of elasticity, the current strength of 80 A for the 3G welding position gets the highest value of 97.94 (GPa,KN/mm2), In the value of the impact test results, the current strength of 80 A is the 1G welding position that gets the highest value, which is 116 Joules. In the observation of microstructure testing, 3 points were carried out, Weld metal, HAZ and Base metal at each strong current

Summertime M2 Internal Tides in the Northern Yellow Sea

The summertime M2 internal tide in the northern Yellow Sea is investigated with moored current meter observations and numerical current model results. The hydrodynamic model, which is implemented from the Regional Ocean Model System (ROMS) with 1 km horizontal resolution, is capable of resolving the internal tidal dynamics and the results are validated in a comparison with observations. The vertical pattern of a mode-1, semi-diurnal internal tide is clearly captured by the moored ADCP as well as in the simulation results. Spectral analysis of the current results shows that the M2 internal tide is dominant in the northern Yellow Sea. Analysis of the major M2 internal tide energetics demonstrated a complex spatial pattern. The tidal mixing front along the Korean coast and on the northern shelf provided proper conditions for the generation and propagation of the internal tides. Near the Changshan islands, the M2 internal tide is mainly generated near the local topography anomalies with relatively strong current magnitude, equal to about 30% of the barotropic component, thus modifying the local current field. These local internal tides are short-lived phenomena rapidly being dissipated along the propagation pathway, restricting their influence within a few kilometers around the islands.

Annual Dynamics of Phytoplankton in the Black Sea in Relation to Wind Exposure

Studies of the annual dynamics of phytoplankton in the NE Black Sea at two stations on the shelf and the continental slope were conducted in 2016, 2017, and 2019. The species composition of phytoplankton has not undergone significant changes compared to previous decades. The coccolithophore Emiliania huxleyi, small flagellates, and diatoms determined the abundance of phytoplankton; and diatoms, coccolithophores, and dinoflagellates determined the total biomass. The annual dynamics of the satellite-derived chlorophyll-a showed peaks in spring and autumn, and sometimes in summer. During the stratified water column period, strong winds in most cases led to a detectible increase in chlorophyll-a. The annual dynamics of phytoplankton followed the pattern: small diatoms (spring) → coccolithophores (late spring, early summer) → large diatoms (summer, autumn). Such a pattern was typical for the previous decades. Coccolithophores dominated in weak SE winds, diatoms in NE winds. The combined effect of sustained offshore wind and strong current can cause diatom blooms during stratified water, even if the wind velocity is moderate.

Slow build-up of turbidity currents triggered by a moderate earthquake in the Sea of Marmara

Earthquake-induced submarine slope destabilization is known to cause debris flows and turbidity currents, but the hydrodynamic processes associated with these events remain poorly understood. Records are scarce and this notably limits our ability to interpret marine paleoseismological sedimentary records. An instrumented frame comprising a pressure recorder and a Doppler recording current meter deployed at the seafloor in the Sea of Marmara Central Basin recorded consequences of a MW = 5.8 earthquake occurring Sept 26, 2019 and of a Mw = 4.7 foreshock two days before. The smaller event caused sediment resuspension but no strong current. The larger event triggered a complex response involving a mud flow and turbidity currents with variable velocities and orientations, which may result from multiple slope failures. A long delay of 10 hours is observed between the earthquake and the passing of the strongest turbidity current. The distance travelled by the sediment particles during the event is estimated to several kilometres, which could account for a local deposit on a sediment fan at the outlet of a canyon, but not for the covering of the whole basin floor. We show that after a moderate earthquake, delayed turbidity current initiation may occur, possibly by ignition of a cloud of resuspended sediment. Some caution is thus required when tying seismoturbidites with earthquakes of historical importance. However, the horizontal extent of the deposits should remain indicative of the size of the earthquake.

Geographic Variation of Particle Size Distribution in the Kuroshio Region: Possible Causes in the Upper Water Column

Particle size distribution (PSD) in the ocean is a fundamental property that influences carbon export and food webs; however, PSD variation and its causes in oligotrophic oceans are not entirely clear. Here, we used Laser In-Situ Scattering and Transmissometry to investigate PSD (size range 5.2–119 μm) and related variables at 11 stations in the surface layer (0–20 m) of the Kuroshio region of the western North Pacific, where strong current causes dynamic hydrographic and ecological conditions. PSD slopes (range –3.2 to –4.2), derived from the power law model, were steeper at onshore stations and flatter at oligotrophic stations located offshore and at lower latitudes. Notably, slopes tended to become steeper with increasing chlorophyll a concentration, opposing the generally observed relationship between the two variables, whereas they became flatter with increasing transparent exopolymer particle (TEP) concentration. Possible explanations of the above results are localized occurrence of nanophytoplankton and TEP facilitation of particle aggregation. The results support the hypothesis that PSD slopes are controlled by a multitude of factors, including phytoplankton community dynamics and aggregation processes. To determine whether TEP-induced particle aggregation enhances or suppresses carbon export, we need a better understanding of the nature (porosity, density, and sinking velocity) of aggregates in oligotrophic oceans.

Numerical Simulation and Active Protection of Lightning Discharge Based on Quantum Heuristic Evolutionary Algorithm

Thunder is a discharge phenomenon that often occurs in nature. Due to its physical influences such as strong current, high temperature, strong shock waves, strong electromagnetic radiation, etc., it has a huge destructive effect instantly, which may bring serious threats to people's lives and property safety. This paper aims to study the lightning discharge numerical simulation and active protection based on the quantum heuristic evolutionary algorithm, and proposes to apply the lightning discharge numerical simulation to the prevention of lightning disasters. This article gives a detailed description of the quantum algorithm, the generation and harm of lightning discharge. In addition, this article conducts related experiments on lightning discharge numerical simulation and active protection. The experimental results show that targeted active protection and effective numerical simulation are important measures to prevent lightning disasters. Active lightning protection measures can reduce lightning by 30%. Losses caused by disasters.

EXAMPLE OF APPLICATION OF THE PONTRYAGIN’S MINIMUM PRINCIPLE “PMP EXTENSION”: ZERMELO PROBLEM (WITH CURRENT SPEED MORE THAN BOAT SPEED HYPOTHESIS)

We present an example of application covering several cases using the extension of the Pontryaguine minimum principle (PMP) in the case where we add a constraint on reaching a target variety at the final time: the Zermelo problem with current speed more than Boat speed hypothesis, where we consider a boat crossing a channel under a strong current and where we try to reach the opposite bank by minimizing the lateral offset or by minimizing the crossing time.

On Abnormally Strong Currents Observed on the Northern Coast of Peru during the 2015-2016 El Niño

The northern coast of Peru is a region that can rapidly detect the impact of an El Niño. To investigate the effects of the 2015-2016 El Niño on the oceanographic environment of the northern coast of Peru, the temperature and current data obtained from moored equipment at an oil platform were analyzed. Strong coastal along-shore currents of more than 0.60 m·s-1 were observed three times, although the mean current speed was 0.10 m·s-1 flowing toward the south-southwest. After the first strong current, the bottom temperature increased and the mixed layer deepened and remained there during the El Niño event. The temperature reached a maximum after the strong coastal current, then decreased gradually. An analysis of wind and sea surface height anomalies revealed that the coastal strong current was caused by Kelvin waves and the deepening of the mixed layer was not related to local winds, but to coastal Kelvin waves from the equator during the El Niño event.