Effect of nano TiC on microstructure and microhardness of composite additive manufacturing 316L stainless steel
Abstract The lower surface hardness limits the further application of 316 L stainless steel. In this study, selective laser melting (SLM)/laser metal deposition (LMD) composite additive manufacturing technology was used to prepare five kinds of 316L-nano-TiC cermet strengthening layers on the surface of 316L stainless steel, and to study the effect of nano-TiC particle content on the microstructure and the influence of microhardness. Use Laser microscope, scanning electron microscope (SEM), X-ray diffractometer (XRD) to analyze the structure, element distribution and phase composition of the strengthening layer. The hardness of the strengthened layer was analyzed using a Vickers micro-hardness tester. The study found that the composite SLM/LMD formed samples changed continuously from LMD forming to SLM forming, showing good metallurgical bonding. Diffusion of TiC particles was observed in the SLM strengthening layer, and TiC phase was detected in the strengthening layer. Compared with the 316L matrix, the microhardness of the strengthened layer is significantly improved. When 50wt% TiC is added, the average hardness of the strengthened layer is 1.9 times that of the 316L matrix, and the highest is 408.9HV. The results of this study show that the strengthening layer manufactured by composite additive materials can effectively improve the hardness of the 316L stainless steel matrix. As the content of nano-TiC in the preset powder increases, the microhardness of the strengthening layer first increases and then decreases, and the hardness of the 50wt% TiC strengthening layer is the highest. There are distributed nano-TiC particles in the structure of the strengthening layer, and the distribution of nano-TiC particles in the 50wt% TiC strengthening layer is more uniform than other samples. This research provides a new reference for the strengthening of 316L stainless steel through SLM/LMD composite additive manufacturing technology and the addition of nano-TiC particles.
