Non equilibrium diffusion limit in a barotropic radiative flow

Author(s):  
Bernard Ducomet ◽  
Šárka Nečasová
2017 ◽  
Vol 22 (4) ◽  
pp. 889-912 ◽  
Author(s):  
Wenjun Sun ◽  
Song Jiang ◽  
Kun Xu

AbstractThis paper is about the construction of a unified gas-kinetic scheme (UGKS) for a coupled system of radiative transport and material heat conduction with different diffusive limits. Different from the previous approach, instead of including absorption/emission only, the current method takes both scattering and absorption/emission mechanism into account in the radiative transport process. As a result, two asymptotic limiting solutions will appear in the diffusive regime. In the strong absorption/emission case, an equilibrium diffusion limit is obtained, where the system is mainly driven by a nonlinear diffusion equation for the equilibrium radiation and material temperature. However, in the strong scattering case, a non-equilibrium limit can be obtained, where coupled nonlinear diffusion system with different radiation and material temperature is obtained. In addition to including the scattering term in the transport equation, an implicit UGKS (IUGKS) will be developed in this paper as well. In the IUGKS, the numerical flux for the radiation intensity is constructed implicitly. Therefore, the conventional CFL constraint for the time step is released. With the use of a large time step for the radiative transport, it becomes possible to couple the IUGKS with the gas dynamic equations to develop an efficient numerical method for radiative hydrodynamics. The IUGKS is a valid method for all radiative transfer regimes. A few numerical examples will be presented to validate the current implicit method for both optical thin to optical thick cases.


Author(s):  
Edward A Kenik

Segregation of solute atoms to grain boundaries, dislocations, and other extended defects can occur under thermal equilibrium or non-equilibrium conditions, such as quenching, irradiation, or precipitation. Generally, equilibrium segregation is narrow (near monolayer coverage at planar defects), whereas non-equilibrium segregation exhibits profiles of larger spatial extent, associated with diffusion of point defects or solute atoms. Analytical electron microscopy provides tools both to measure the segregation and to characterize the defect at which the segregation occurs. This is especially true of instruments that can achieve fine (<2 nm width), high current probes and as such, provide high spatial resolution analysis and characterization capability. Analysis was performed in a Philips EM400T/FEG operated in the scanning transmission mode with a probe diameter of <2 nm (FWTM). The instrument is equipped with EDAX 9100/70 energy dispersive X-ray spectrometry (EDXS) and Gatan 666 parallel detection electron energy loss spectrometry (PEELS) systems. A double-tilt, liquid-nitrogen-cooled specimen holder was employed for microanalysis in order to minimize contamination under the focussed spot.


Author(s):  
Michel Le Bellac ◽  
Fabrice Mortessagne ◽  
G. George Batrouni

1978 ◽  
Vol 39 (C6) ◽  
pp. C6-541-C6-542
Author(s):  
B. Pannetier ◽  
J. P. Maneval

1978 ◽  
Vol 39 (C6) ◽  
pp. C6-500-C6-502 ◽  
Author(s):  
J. Bindslev Hansen ◽  
P. Jespersen ◽  
P. E. Lindelof
Keyword(s):  

1979 ◽  
Vol 40 (C7) ◽  
pp. C7-871-C7-872
Author(s):  
E. F. Gippius ◽  
B. I. Iljukhin ◽  
V. N. Kolesnikov

Sign in / Sign up

Export Citation Format

Share Document