scholarly journals Mobility, Microtubule Nucleation and Structure of Microtubule-organizing Centers in Multinucleated Hyphae ofAshbya gossypii

2010 ◽  
Vol 21 (1) ◽  
pp. 18-28 ◽  
Author(s):  
Claudia Lang ◽  
Sandrine Grava ◽  
Tineke van den Hoorn ◽  
Rhonda Trimble ◽  
Peter Philippsen ◽  
...  
Keyword(s):  
Spindle Pole Body ◽  
Hyphal Growth ◽  
Spindle Pole ◽  
Microtubule Organizing Center ◽  
Microtubule Nucleation ◽  
Cytoplasmic Microtubule ◽  
Organizing Center ◽  
Cytoplasmic Side ◽  
Independent Mode

We investigated the migration of multiple nuclei in hyphae of the filamentous fungus Ashbya gossypii. Three types of cytoplasmic microtubule (cMT)-dependent nuclear movements were characterized using live cell imaging: short-range oscillations (up to 4.5 μm/min), rotations (up to 180° in 30 s), and long-range nuclear bypassing (up to 9 μm/min). These movements were superimposed on a cMT-independent mode of nuclear migration, cotransport with the cytoplasmic stream. This latter mode is sufficient to support wild-type-like hyphal growth speeds. cMT-dependent nuclear movements were led by a nuclear-associated microtubule-organizing center, the spindle pole body (SPB), which is the sole site of microtubule nucleation in A. gossypii. Analysis of A. gossypii SPBs by electron microscopy revealed an overall laminar structure similar to the budding yeast SPB but with distinct differences at the cytoplasmic side. Up to six perpendicular and tangential cMTs emanated from a more spherical outer plaque. The perpendicular and tangential cMTs most likely correspond to short, often cortex-associated cMTs and to long, hyphal growth-axis–oriented cMTs, respectively, seen by in vivo imaging. Each SPB nucleates its own array of cMTs, and the lack of overlapping cMT arrays between neighboring nuclei explains the autonomous nuclear oscillations and bypassing observed in A. gossypii hyphae.

scholarly journals The microtubule polymerase Stu2 promotes oligomerization of the γ-TuSC for cytoplasmic microtubule nucleation

eLife ◽  
2018 ◽  
Vol 7 ◽  
Author(s):  
Judith Gunzelmann ◽  
Diana Rüthnick ◽  
Tien-chen Lin ◽  
Wanlu Zhang ◽  
Annett Neuner ◽  
...  
Keyword(s):  
Budding Yeast ◽  
Spindle Pole Body ◽  
Family Members ◽  
Spindle Pole ◽  
Microtubule Nucleation ◽  
Cytoplasmic Microtubule ◽  
Pole Body ◽  
Cytoplasmic Microtubules

Stu2/XMAP215/ZYG-9/Dis1/Alp14/Msps/ch-TOG family members in association with with γ-tubulin complexes nucleate microtubules, but we know little about the interplay of these nucleation factors. Here, we show that the budding yeast Stu2 in complex with the γ-tubulin receptor Spc72 nucleates microtubules in vitro without the small γ-tubulin complex (γ-TuSC). Upon γ-TuSC addition, Stu2 facilitates Spc72–γ-TuSC interaction by binding to Spc72 and γ-TuSC. Stu2 together with Spc72–γ-TuSC increases microtubule nucleation in a process that is dependent on the TOG domains of Stu2. Importantly, these activities are also important for microtubule nucleation in vivo. Stu2 stabilizes Spc72–γ-TuSC at the minus end of cytoplasmic microtubules (cMTs) and an in vivo assay indicates that cMT nucleation requires the TOG domains of Stu2. Upon γ-tubulin depletion, we observed efficient cMT nucleation away from the spindle pole body (SPB), which was dependent on Stu2. Thus, γ-TuSC restricts cMT assembly to the SPB whereas Stu2 nucleates cMTs together with γ-TuSC and stabilizes γ-TuSC at the cMT minus end.

Genetic interactions between CDC31 and KAR1, two genes required for duplication of the microtubule organizing center in Saccharomyces cerevisiae.

Genetics ◽  
1994 ◽  
Vol 137 (2) ◽  
pp. 407-422 ◽  
Author(s):  
E A Vallen ◽  
W Ho ◽  
M Winey ◽  
M D Rose
Keyword(s):  
Copy Number ◽  
Gene Dosage ◽  
Spindle Pole Body ◽  
Direct Interaction ◽  
Spindle Pole ◽  
High Copy Number ◽  
Temperature Sensitive ◽  
Microtubule Organizing Center ◽  
Recessive Mutations ◽  
Organizing Center

Abstract KAR1 encodes an essential component of the yeast spindle pole body (SPB) that is required for karyogamy and SPB duplication. A temperature-sensitive mutation, kar1-delta 17, mapped to a region required for SPB duplication and for localization to the SPB. To identify interacting SPB proteins, we isolated 13 dominant mutations and 3 high copy number plasmids that suppressed the temperature sensitivity of kar1-delta 17. Eleven extragenic suppressor mutations mapped to two linkage groups, DSK1 and DSK2. The extragenic suppressors were specific for SPB duplication and did not suppress karyogamy-defective alleles. The major class, DSK1, consisted of mutations in CDC31. CDC31 is required for SPB duplication and encodes a calmodulin-like protein that is most closely related to caltractin/centrin, a protein associated with the Chlamydomonas basal body. The high copy number suppressor plasmids contained the wild-type CDC31 gene. One CDC31 suppressor allele conferred a temperature-sensitive defect in SPB duplication, which was counter-suppressed by recessive mutations in KAR1. In spite of the evidence for a direct interaction, the strongest CDC31 alleles, as well as both DSK2 alleles, suppressed a complete deletion of KAR1. However, the CDC31 alleles also made the cell supersensitive to KAR1 gene dosage, arguing against a simple bypass mechanism of suppression. We propose a model in which Kar1p helps localize Cdc31p to the SPB and that Cdc31p then initiates SPB duplication via interaction with a downstream effector.

scholarly journals A Fourth Component of the Fission Yeast γ-Tubulin Complex, Alp16, Is Required for Cytoplasmic Microtubule Integrity and Becomes Indispensable When γ-Tubulin Function Is Compromised

2002 ◽  
Vol 13 (7) ◽  
pp. 2360-2373 ◽  
Author(s):  
Akiko Fujita ◽  
Leah Vardy ◽  
Miguel Angel Garcia ◽  
Takashi Toda
Keyword(s):  
Fission Yeast ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Microtubule Organizing Center ◽  
Cytoplasmic Microtubule ◽  
Multicopy Suppressor ◽  
Large Complex ◽  
Synthetically Lethal ◽  
And Function

γ-Tubulin functions as a multiprotein complex, called the γ-tubulin complex (γ-TuC), and composes the microtubule organizing center (MTOC). Fission yeast Alp4 and Alp6 are homologues of two conserved γ-TuC proteins, hGCP2 and hGCP3, respectively. We isolated a novel gene, alp16 + , as a multicopy suppressor of temperature-sensitive alp6-719mutants. alp16 + encodes a 759-amino-acid protein with two conserved regions found in all other members of γ-TuC components. In addition, Alp16 contains an additional motif, which shows homology to hGCP6/Xgrip210. Gene disruption shows that alp16 + is not essential for cell viability. However, alp16 deletion displays abnormally long cytoplasmic microtubules, which curve around the cell tip. Furthermore, alp16-deleted mutants are hypersensitive to microtubule-depolymerizing drugs and synthetically lethal with either temperature-sensitive alp4-225,alp4-1891, or alp6-719 mutants. Overproduction of Alp16 is lethal, with defective phenotypes very similar to loss of Alp4 or Alp6. Alp16 localizes to the spindle pole body throughout the cell cycle and to the equatorial MTOC at postanaphase. Alp16 coimmunoprecipitates with γ-tubulin and cosediments with the γ-TuC in a large complex (>20 S). Alp16 is, however, not required for the formation of this large complex. We discuss evolutional conservation and divergence of structure and function of the γ-TuC between yeast and higher eukaryotes.

scholarly journals Chromosome arm length and nuclear constraints determine the dynamic relationship of yeast subtelomeres

2010 ◽  
Vol 107 (5) ◽  
pp. 2025-2030 ◽  
Author(s):  
Pierre Therizols ◽  
Tarn Duong ◽  
Bernard Dujon ◽  
Christophe Zimmer ◽  
Emmanuelle Fabre
Keyword(s):  
Nuclear Periphery ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Yeast Cells ◽  
Nuclear Space ◽  
Microtubule Organizing Center ◽  
Physical Constraints ◽  
Dynamic Relationship ◽  
Chromosome Arm

Physical interactions between distinct chromosomal genomic loci are important for genomic functions including recombination and gene expression, but the mechanisms by which these interactions occur remain obscure. Using telomeric association as a model system, we analyzed here the in vivo organization of chromosome ends of haploid yeast cells during interphase. We separately labeled most of the 32 subtelomeres and analyzed their positions both in nuclear space and relative to three representative reference subtelomeres by high-throughput 3D microscopy and image processing. We show that subtelomeres are positioned nonrandomly at the nuclear periphery, depending on the genomic size of their chromosome arm, centromere attachment to the microtubule organizing center (spindle pole body, SPB), and the volume of the nucleolus. The distance of subtelomeres to the SPB increases consistently with chromosome arm length up to ≈300 kb; for larger arms the influence of chromosome arm length is weaker, but the effect of the nucleolar volume is stronger. Distances between pairs of subtelomeres also exhibit arm-length dependence and suggest, together with dynamic tracking experiments, that potential associations between subtelomeres are unexpectedly infrequent and transient. Our results suggest that interactions between subtelomeres are nonspecific and instead governed by physical constraints, including chromosome structure, attachment to the SPB, and nuclear crowding.

scholarly journals Brr6 drives the Schizosaccharomyces pombe spindle pole body nuclear envelope insertion/extrusion cycle

2011 ◽  
Vol 195 (3) ◽  
pp. 467-484 ◽  
Author(s):  
Tiina Tamm ◽  
Agnes Grallert ◽  
Emily P.S. Grossman ◽  
Isabel Alvarez-Tabares ◽  
Frances E. Stevens ◽  
...  
Keyword(s):  
Nuclear Envelope ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Mitotic Exit ◽  
Microtubule Organizing Center ◽  
Pole Body ◽  
Cytoplasmic Face ◽  
Organizing Center ◽  
Nuclear Component ◽  
Anaphase B

The fission yeast interphase spindle pole body (SPB) is a bipartite structure in which a bulky cytoplasmic domain is separated from a nuclear component by the nuclear envelope. During mitosis, the SPB is incorporated into a fenestra that forms within the envelope during mitotic commitment. Closure of this fenestra during anaphase B/mitotic exit returns the cytoplasmic component to the cytoplasmic face of an intact interphase nuclear envelope. Here we show that Brr6 is transiently recruited to SPBs at both SPB insertion and extrusion. Brr6 is required for both SPB insertion and nuclear envelope integrity during anaphase B/mitotic exit. Genetic interactions with apq12 and defective sterol assimilation suggest that Brr6 may alter envelope composition at SPBs to promote SPB insertion and extrusion. The restriction of the Brr6 domain to eukaryotes that use a polar fenestra in an otherwise closed mitosis suggests a conserved role in fenestration to enable a single microtubule organizing center to nucleate both cytoplasmic and nuclear microtubules on opposing sides of the nuclear envelope.

scholarly journals Nuclear Export Receptor Xpo1/Crm1 Is Physically and Functionally Linked to the Spindle Pole Body in Budding Yeast

2008 ◽  
Vol 28 (17) ◽  
pp. 5348-5358 ◽  
Author(s):  
Anja Neuber ◽  
Jacqueline Franke ◽  
Angelika Wittstruck ◽  
Gabriel Schlenstedt ◽  
Thomas Sommer ◽  
...  
Keyword(s):  
Nuclear Export ◽  
Budding Yeast ◽  
Nuclear Export Signal ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Microtubule Organizing Center ◽  
Functional Link ◽  
Pole Body ◽  
Nuclear Export Receptor

ABSTRACT The spindle pole body (SPB) represents the microtubule organizing center in the budding yeast Saccharomyces cerevisiae. It is a highly structured organelle embedded in the nuclear membrane, which is required to anchor microtubules on both sides of the nuclear envelope. The protein Spc72, a component of the SPB, is located at the cytoplasmic face of this organelle and serves as a receptor for the γ-tubulin complex. In this paper we show that it is also a binding partner of the nuclear export receptor Xpo1/Crm1. Xpo1 binds its cargoes in a Ran-dependent fashion via a short leucine-rich nuclear export signal (NES). We show that binding of Spc72 to Xpo1 depends on Ran-GTP and a functional NES in Spc72. Mutations in this NES have severe consequences for mitotic spindle morphology in vivo. This is also the case for xpo1 mutants, which show a reduction in cytoplasmic microtubules. In addition, we find a subpopulation of Xpo1 localized at the SPB. Based on these data, we propose a functional link between Xpo1 and the SPB and discuss a role for this exportin in spindle biogenesis in budding yeast.

scholarly journals Fission yeast MOZART1/Mzt1 is an essential γ-tubulin complex component required for complex recruitment to the microtubule organizing center, but not its assembly

2013 ◽  
Vol 24 (18) ◽  
pp. 2894-2906 ◽  
Author(s):  
Hirohisa Masuda ◽  
Risa Mori ◽  
Masashi Yukawa ◽  
Takashi Toda
Keyword(s):  
Fission Yeast ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Microtubule Organizing Center ◽  
Microtubule Organization ◽  
Unique Role ◽  
Pole Body ◽  
Organizing Center ◽  
Core Components

γ-Tubulin plays a universal role in microtubule nucleation from microtubule organizing centers (MTOCs) such as the animal centrosome and fungal spindle pole body (SPB). γ-Tubulin functions as a multiprotein complex called the γ-tubulin complex (γ-TuC), consisting of GCP1–6 (GCP1 is γ-tubulin). In fungi and flies, it has been shown that GCP1–3 are core components, as they are indispensable for γ-TuC complex assembly and cell division, whereas the other three GCPs are not. Recently a novel conserved component, MOZART1, was identified in humans and plants, but its precise functions remain to be determined. In this paper, we characterize the fission yeast homologue Mzt1, showing that it is essential for cell viability. Mzt1 is present in approximately equal stoichiometry with Alp4/GCP2 and localizes to all the MTOCs, including the SPB and interphase and equatorial MTOCs. Temperature-sensitive mzt1 mutants display varying degrees of compromised microtubule organization, exhibiting multiple defects during both interphase and mitosis. Mzt1 is required for γ-TuC recruitment, but not sufficient to localize to the SPB, which depends on γ-TuC integrity. Intriguingly, the core γ-TuC assembles in the absence of Mzt1. Mzt1 therefore plays a unique role within the γ-TuC components in attachment of this complex to the major MTOC site.

scholarly journals Centrosomal Proteins CG-NAP and Kendrin Provide Microtubule Nucleation Sites by Anchoring γ-Tubulin Ring Complex

2002 ◽  
Vol 13 (9) ◽  
pp. 3235-3245 ◽  
Author(s):  
Mikiko Takahashi ◽  
Akiko Yamagiwa ◽  
Tamako Nishimura ◽  
Hideyuki Mukai ◽  
Yoshitaka Ono
Keyword(s):  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Terminal Region ◽  
Microtubule Assembly ◽  
Microtubule Nucleation ◽  
Amino Terminal ◽  
Ring Complex ◽  
Carboxyl Terminal

Microtubule assembly is initiated by the γ-tubulin ring complex (γ-TuRC). In yeast, the microtubule is nucleated from γ-TuRC anchored to the amino-terminus of the spindle pole body component Spc110p, which interacts with calmodulin (Cmd1p) at the carboxy-terminus. However, mammalian protein that anchors γ-TuRC remains to be elucidated. A giant coiled-coil protein, CG-NAP (centrosome and Golgi localized PKN-associated protein), was localized to the centrosome via the carboxyl-terminal region. This region was found to interact with calmodulin by yeast two-hybrid screening, and it shares high homology with the carboxyl-terminal region of another centrosomal coiled-coil protein, kendrin. The amino-terminal region of either CG-NAP or kendrin indirectly associated with γ-tubulin through binding with γ-tubulin complex protein 2 (GCP2) and/or GCP3. Furthermore, endogenous CG-NAP and kendrin were coimmunoprecipitated with each other and with endogenous GCP2 and γ-tubulin, suggesting that CG-NAP and kendrin form complexes and interact with γ-TuRC in vivo. These proteins were localized to the center of microtubule asters nucleated from isolated centrosomes. Pretreatment of the centrosomes by antibody to CG-NAP or kendrin moderately inhibited the microtubule nucleation; moreover, the combination of these antibodies resulted in stronger inhibition. These results imply that CG-NAP and kendrin provide sites for microtubule nucleation in the mammalian centrosome by anchoring γ-TuRC.

scholarly journals Novel Phosphorylation States of the Yeast Spindle Pole Body

2018 ◽  
Author(s):  
Kimberly K. Fong ◽  
Alex Zelter ◽  
Beth Graczyk ◽  
Jill M. Hoyt ◽  
Michael Riffle ◽  
...  
Keyword(s):  
Cell Cycle ◽  
Spindle Pole Body ◽  
Mitotic Checkpoint ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Phosphorylation Sites ◽  
Microtubule Nucleation ◽  
Data Set ◽  
Pole Body

ABSTRACTPhosphorylation regulates yeast spindle pole body (SPB) duplication and separation and likely regulates microtubule nucleation. We report a phosphoproteomic analysis using tandem mass spectrometry of purifiedSaccharomyces cerevisiaeSPBs for two cell cycle arrests, G1/S and the mitotic checkpoint, expanding on previously reported phosphoproteomic data sets. We present a novel phosphoproteomic state of SPBs arrested in G1/S by acdc4-1temperature sensitive mutation, with particular interest in phosphorylation events on the γ-tubulin small complex (γ-TuSC). Thecdc4-1arrest is the earliest arrest at which microtubule nucleation has occurred at the newly duplicated SPB. Several novel phosphorylation sites were identified in G1/S and during mitosis on the microtubule nucleating γ-TuSC. These sites were analyzedin vivoby fluorescence microscopy and were shown to be required for proper regulation of spindle length. Additionally,in vivoanalysis of two mitotic sites in Spc97 found that phosphorylation of at least one of these sites is required for progression through the cell cycle. This phosphoproteomic data set not only broadens the scope of the phosphoproteome of SPBs, it also identifies several γ-TuSC phosphorylation sites influencing microtubule regulation.

Sign in / Sign up

Export Citation Format

Share Document