scholarly journals Efficacy of Spinosad and Standards for Control of Small Black Cutworm Larvae, 1997

1998 ◽  
Vol 23 (1) ◽  
pp. 317-317
Author(s):  
D. J. Shetlar ◽  
K. McClure ◽  
H. D. Niemczyk
Keyword(s):  
Stainless Steel ◽  
Creeping Bentgrass ◽  
Steel Cylinder ◽  
Black Cutworm ◽  
Stainless Steel Cylinder ◽  
Dishwashing Detergent ◽  
Research And Education

Abstract The study was located on bentgrass range 1 north at the Ohio State Turfgrass Research and Education Center, Columbus, OH. Treatments were applied on 19 Aug to plots 4 X 6 ft arranged in a RCB, replicated 4 times. Liquid treatments were applied using a CO2 sprayer calibrated to deliver 2.0 gal/1000ft2. No immediate posttreatment irrigation was applied. The 100% creeping bentgrass range was mowed at 0.5 inch, had no thatch and was irrigated daily with 0.25 inch of water between (05:00 and 06:00). On 19 Aug, one 8-inch stainless steel cylinder was driven into the turf, about 2 hr after the last spraying to allow for complete drying of all treatments. Each cylinder was infested with eight 3rd- and 4th-instar BCW (0.375 to 0.5 inch) and covered with nylon screen. On 22 Aug (3 DAT) the covers were removed and each cylinder was flooded with a soapy water mix (15 ml Joy dishwashing detergent in 1.0 gal water) to flush out any live BCW.

The Reality of Perception: Demonstrable Effects of Perceived Risk in Goiania, Brazil

1988 ◽  
Vol 10 (3-4) ◽  
pp. 8-12 ◽  
Author(s):  
John Petterson
Keyword(s):  
Stainless Steel ◽  
Cancer Patients ◽  
Perceived Risk ◽  
Scrap Metal ◽  
Luminescent Material ◽  
Steel Cylinder ◽  
Stainless Steel Cylinder ◽  
Brazilian State ◽  
The City

On September 13, 1987, two metal and paper scavengers of the city of Goiania (pop. 1,000,000), in the central Brazilian state of Goias (pop. 13,000,000) entered an abandoned clinic in search of scrap metal. They discovered a 400-kilograrn machine that had been used to treat cancer patients with controlled doses of radiation. They dismantled the device and extracted a stainless steel cylinder; then they took the cylinder to a junkyard, broke it open with a sledge hammer, and removed a one-cubic-inch platinum capsule. Subsequently they sawed open the capsule, revealing approximately 100 grams of luminescent material, which was described by witnesses as "carnival glitter."

scholarly journals An experimental investigation of the effect of coating on heat transfer during quenching

2021 ◽  
Vol 2057 (1) ◽  
pp. 012053
Author(s):  
I A Molotova ◽  
A R Zabirov ◽  
V V Yagov ◽  
M M Vinogradov ◽  
N N Antonov ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Stainless Steel ◽  
Nickel Coating ◽  
Film Boiling ◽  
Porous Nickel ◽  
Cooling Process ◽  
Steel Cylinder ◽  
Stainless Steel Cylinder ◽  
Cooling Intensity ◽  
Polished Stainless Steel

Abstract The work is aimed at studying the effect of galvanic nickel coating of a stainless steel cylinder on the quenching. In order to compare the results, the polished stainless steel cylinder was used as a sample. In addition, the influence of the formation of an oxide layer on the cooling process was studied. The experiments were carried out in water and ethanol with different subcoolings. The oxidized porous nickel coating led to increasing of the transition temperature from stable film boiling to intensive boiling regime. It was especially noticeable for cooling in water at high subcooling due to the higher cooling intensity caused by vapour layer thinning.

Sign in / Sign up

Export Citation Format

Share Document