Three-dimensional crustal Vp and Vs structures beneath the southern segment of the Tan-Lu fault revealed by active source and earthquake data

2020 ◽  
Vol 223 (3) ◽  
pp. 2148-2165
Author(s):  
Yunpeng Zhang ◽  
Baoshan Wang ◽  
Tao Xu ◽  
Wei Yang ◽  
Weitao Wang ◽  
...  
Keyword(s):  
Crustal Structure ◽  
Yangtze River ◽  
Velocity Structure ◽  
Eastern China ◽  
P Wave ◽  
Arrival Times ◽  
Local Earthquakes ◽  
Active Source ◽  
First Arrival ◽  
Earthquake Data

SUMMARY The 2400-km-long Tan-Lu fault, the largest deformation zone in eastern China, plays a decisive role in the seismicity, regional tectonics and mineral deposits distributions. However, the velocity structure beneath the Tan-Lu fault, particularly in the southern segment, is poorly imaged due to the lack of local earthquakes. To obtain a high-resolution crustal structure image, we carried out an active source experiment by firing mobile airgun sources along the Yangtze River in the Anhui Province in October 2015. We manually picked 4118 P wave and 1906 Swave first arrival times from the airgun signals. We also collected 28 957 P wave and 26 257 S wave first arrival times from local earthquakes in a larger area. 3-D crustal velocity images beneath the southern segment of the Tan-Lu fault and surrounding areas are studied using traveltime tomography. Compared with the local earthquake data, the active source data provide better constraints on the upper crustal structure, which further refines the resolution of the lower-crust structure. The Vp and Vs crustal structures are consistent with the local geological settings, and earthquakes are primarily clustered near faults and are spatially correlated with low-velocity zones. Strong velocity contrasts are observed across the Tan-Lu fault zone, which is the main factor controlling local anomalies. The high Vp, Vs and Vp/Vs beneath the Qinling-Dabie orogenic belt and the Middle-Lower Yangtze River Metallogenic Belt may relate to Mesozoic lithospheric delamination and asthenospheric upwelling. These results also demonstrate that the mobile large-volume airgun sources are promising tools for 3-D crustal structure surveys.

scholarly journals P-wave crustal tomography of Greece with use of an accurate two-point ray tracer

1997 ◽  
Vol 40 (1) ◽  
Author(s):  
G. Drakatos ◽  
G. Karantonis ◽  
G. N. Stavrakakis
Keyword(s):  
Large Scale ◽  
Velocity Structure ◽  
Three Dimensional ◽  
Seismic Energy ◽  
Aegean Sea ◽  
P Wave ◽  
Low Velocity ◽  
Aegean Area ◽  
Arrival Times ◽  
Horizontal Variations

The three-dimensional velocity structure of the crust in the Aegean sea and the surrounding regions (34.0º-42.OºN, 19.0ºE-29.0ºE) is investigated by inversion of about 10000 residuals of arrival times of P-wave from local events. The resulting velocity structure shows strong horizontal variations due to the complicated crustal structure and the variations of crustal thickness. The northern part of the region generally shows high velocities. In the inner part of the volcanic arc (Southern Aegean area), relatively low velocities are observed, suggesting a large-scale absorption of seismic energy as confirmed by the low seismicity of the region. A low velocity zone was observed along the subduction zone of the region, up to a depth of 4 km. The existence of such a zone could be due to granitic or other intrusions in the crust during the uplift of the region during Alpidic orogenesis.

scholarly journals Crustal velocity structure of the Apennines (Italy) from P-wave travel time tomography

1996 ◽  
Vol 39 (6) ◽  
Author(s):  
C. Chiarabba ◽  
A. Amato
Keyword(s):  
Velocity Structure ◽  
P Wave ◽  
Depth Interval ◽  
Low Velocity ◽  
Data Set ◽  
Arrival Times ◽  
Velocity Anomaly ◽  
Minimum Number ◽  
Velocity Images ◽  
Lower Crustal

In this paper we provide P-wave velocity images of the crust underneath the Apennines (Italy), focusing on the lower crustal structure and the Moho topography. We inverted P-wave arrival times of earthquakes which occurred from 1986 to 1993 within the Apenninic area. To overcome inversion instabilities due to noisy data (we used bulletin data) we decided to resolve a minimum number of velocity parameters, inverting for only two layers in the crust and one in the uppermost mantle underneath the Moho. A partial inversion of only 55% of the overall dataset yields velocity images similar to those obtained with the whole data set, indicating that the depicted tomograms are stable and fairly insensitive to the number of data used. We find a low-velocity anomaly in the lower crust extending underneath the whole Apenninic belt. This feature is segmented by a relative high-velocity zone in correspondence with the Ortona-Roccamonfina line, that separates the northern from the southern Apenninic arcs. The Moho has a variable depth in the study area, and is deeper (more than 37 km) in the Adriatic side of the Northern Apennines with respect to the Tyrrhenian side, where it is found in the depth interval 22-34 km.

Direct P-Wave Travel Time Tomography of the Middle East

2021 ◽  
Author(s):  
Susini Desilva ◽  
Ebru Bozdag ◽  
Guust Nolet ◽  
Rengin Gok ◽  
Ahmed Ali ◽  
...  
Keyword(s):  
Middle East ◽  
Reliable Data ◽  
P Wave ◽  
Good Recovery ◽  
Data Set ◽  
Iranian Plateau ◽  
Arrival Times ◽  
Caucasus Region ◽  
First Arrival ◽  
Tomographic Inversions

<p>High-resolution seismic images of the crust and mantle beneath regions of complex surface geological structures are necessary to gain insights on the underlying geodynamical processes. One such region embodying various plate boundary motions and intraplate deformations is the Middle East, and consequently the region is prone to significant seismic activity. Hence a tomographic investigation using a more recent and reliable data set is vital in understanding the ongoing complicated deformation process driven by the African, Arabian and Eurasian plates. The purpose of our study is to retrieve a detailed  model of the crust and mantle beneath the Middle Eastern region using teleseismic P arrival times from the ISC-EHB bulletin (Engdahl et al., 1998).</p><p>Starting with AK135 as the reference model we invert for tomographic models of compressional wavespeed perturbations down to lower mantle depths in an area bounded by longitudes 22E–66E and latitudes 8N–48N.  The data set used in this study consists of regionally observed P-phase arrival times from over 1000 global events from 1996–2016 culminating in a larger dataset than other similar studies. Selection of a reliable data, ray tracing, preconditioning and inversion steps are carried out using the BD-soft software suite (https://www.geoazur.fr/GLOBALSEIS/Soft.html).</p><p>Preliminary inversion results are consistent with the previous regional tomographic studies. In checkerboard tests, cell sizes as low as ∼ 2.8° × 2.8° ( ∼ 240 × 240 km at surface) are generally well recovered down to a 1000 km depth beneath the Anatolian plateau where we currently have the densest coverage. Additionally the Caucasus region and northern parts of the Iranian plateau shows good recovery of ±4% Vp perturbation amplitudes at depths ∼ 70 – 135 km. There is fair recovery for a minimum cell size of ∼ 2.8° × 2.8° beneath the Iranian Plateau, Zagros mountain region, Persian gulf, and northeast Iraq, along with quite good recovery of cell amplitudes towards the Anatolian-Caucasus region at depth ranges 380 – 430 km, 650 – 700 km, and around 950 km. Tomographic inversions unveil a low P velocity zone stretching from the Afar region to Sinai Peninsula consistent with S wave velocity observations of a similar feature by Chang and van der Lee 2011.</p><p>We are able to further improve coverage especially down to lithospheric depths within the Arabian peninsula using first arrival times measured from waveform data collected from regional networks. Addition of first arrival time delays from waveforms highlights a prominent low velocity in the tomographic inversions beneath the volcanic fields of western Saudi Arabia. Our ultimate goal is to perform full-waveform inversion of the region constrained by the constructed P-wave model.</p>

scholarly journals An analysis of the first-arrival times picked on the DSS and wide-angle seismic section recorded in Italy since 1968

2009 ◽  
Vol 47 (6) ◽  
Author(s):  
L. De Luca ◽  
R. De Franco ◽  
G. Biella ◽  
A. Corsi ◽  
R. Tondi
Keyword(s):  
Travel Time ◽  
Velocity Model ◽  
P Wave ◽  
Wide Angle ◽  
Seismic Section ◽  
Arrival Times ◽  
First Arrival ◽  
Time Offset ◽  
Refraction Data ◽  
1D Velocity Model

We performed an analysis of refraction data recorded in Italy since 1968 in the frame of the numerous deep seismic sounding and wide-angle reflection/refraction projects. The aims of this study are to construct a parametric database including the recording geometric information relative to each profile, the phase pickings and the results of some kinematic analyses performed on the data, and to define a reference 1D velocity model for the Italian territory from all the available refraction data. As concerns the first goal, for each seismic section we picked the P-wave first-arrival-times, evaluated the uncertainties of the arrival-times pickings and determined from each travel time-offset curve the 1D velocity model. The study was performed on 419 seismic sections. Picking was carried out manually by an algorithm which includes the computation of three picking functions and the picking- error estimation. For each of the travel time-offset curves a 1D velocity model has been calculated. Actually, the 1D velocity-depth functions were estimated in three different ways which assume: a constant velocitygradient model, a varying velocity-gradient model and a layered model. As regards the second objective of this work, a mean 1D velocity model for the Italian crust was defined and compared with those used for earthquake hypocentre locations and seismic tomographic studies by different institutions operating in the Italian area, to assess the significance of the model obtained. This model can be used in future works as input for a next joint tomographic inversion of active and passive seismic data.

Crustal velocity structure beneath the NW Dinarides from 1-D hypocenter-velocity inversion

2021 ◽  
Author(s):  
Gregor Rajh ◽  
Josip Stipčević ◽  
Mladen Živčić ◽  
Marijan Herak ◽  
Andrej Gosar
Keyword(s):  
Velocity Structure ◽  
Velocity Model ◽  
P Wave ◽  
Depth Range ◽  
Velocity Inversion ◽  
Arrival Times ◽  
Simultaneous Inversion ◽  
Velocity Modeling ◽  
Velocity Models ◽  
Station Corrections

<p>The investigated area of the NW Dinarides is bordered by the Adriatic foreland, the Southern Alps, and the Pannonian basin at the NE corner of the Adriatic Sea. Its complex crustal structure is the result of interactions among different tectonic units. Despite numerous seismic studies taking place in this region, there still exists a need for a detailed, smaller scale study focusing mainly on the brittle part of the Earth's crust. Therefore, we decided to investigate the velocity structure of the crust using concepts of local earthquake tomography (LET) and minimum 1-D velocity model. Here, we present the results of the 1-D velocity modeling and the catalogue of the relocated seismicity. A minimum 1-D velocity model is computed by simultaneous inversion for hypocentral and velocity parameters together with seismic station corrections and represents the best fit to the observed arrival times.</p><p>We used 15,579 routinely picked P wave arrival times from 631 well-located earthquakes that occurred in Slovenia and in its immediate surroundings (mainly NW Croatia). Various initial 1-D velocity models, differing in velocity and layering, were used as input for velocity inversion in the VELEST program. We also varied several inversion parameters during the inversion runs. Most of the computed 1-D velocity models converged to a stable solution in the depth range between 0 and 25 km. We evaluated the inversion results using rigorous testing procedures and selected two best performing velocity models. Each of these models will be used independently as the initial model in the simultaneous hypocenter-velocity inversion for a 3-D velocity structure in LET. Based on the results of the 1-D velocity modeling, seismicity distribution, and tectonics, we divided the study area into three parts, redefined the earthquake-station geometry, and performed the inversion for each part separately. This way, we gained a better insight into the shallow velocity structure of each subregion and were able to demonstrate the differences among them.</p><p>Besides general structural implications and a potential to improve the results of LET, the new 1-D velocity models along with station corrections can also be used in fast routine earthquake location and to detect systematic travel time errors in seismological bulletins, as already shown by some studies using similar methods.</p>

Sign in / Sign up

Export Citation Format

Share Document