Simultaneous quadrotor autopilot system and collective morphing system design

2020 ◽  
Vol 92 (7) ◽  
pp. 1093-1100
Author(s):  
Oguz Kose ◽  
Tugrul Oktay
Keyword(s):  
State Space ◽  
State Space Model ◽  
Optimization Method ◽  
The State ◽  
Control Technique ◽  
Matlab Simulink ◽  
Content Type ◽  
Space Model ◽  
Proposed Model ◽  
Long Time

Purpose The purpose of this paper is to design a quadrotor with collective morphing using the simultaneous perturbation stochastic approximation (SPSA) optimization algorithm. Design/methodology/approach Quadrotor design is made by using Solidworks drawing program and some mathematical performance relations. Modelling and simulation are performed in Matlab/Simulink program by using the state space model approaches with the parameters mostly taken from Solidworks. Proportional integral derivative (PID) approach is used as control technique. Morphing amount and the best PID coefficients are determined by using SPSA algorithm. Findings By using SPSA algorithm, the amount of morphing and the best PID coefficients are determined, and the quadrotor longitudinal and lateral flights are made most stable via morphing. Research limitations/implications It takes quite a long time to model the quadrotor in Solidworks and Matlab/Simulink with the state space model and using the SPSA algorithm. However, this situation is overcome with the proposed model. Practical implications Optimization with SPSA is very useful in determining the amount of morphing and PID coefficients for quadrotors. Social implications SPSA optimization method is useful in terms of cost, time and practicality. Originality/value It is released to improve performance with morphing, to determine morphing rate with SPSA algorithm and to determine PID coefficients accordingly.

Optimal control method on assembly precision for a remanufactured car engine based on state space model

2016 ◽  
Vol 36 (4) ◽  
pp. 460-472 ◽  
Author(s):  
Jing Hu ◽  
Yuan Zhang ◽  
Maogen GE ◽  
Mingzhou Liu ◽  
Liu Conghu ◽  
...  
Keyword(s):  
Optimal Control ◽  
State Space ◽  
Control Method ◽  
State Space Model ◽  
The State ◽  
Content Type ◽  
Space Model ◽  
Optimal Control Method ◽  
Assembly Error ◽  
Assembly Precision

Purpose The optimal control on reassembly (remanufacturing assembly) error is one of the key technologies to guarantee the assembly precision of remanufactured product. However, because of the uncertainty existing in remanufactured parts, it is difficult to control assembly error during reassembly process. Based on the state space model, this paper aims to propose the optimal control method on reassembly precision to solve this problem. Design/methodology/approach Initially, to ensure the assembly precision of a remanufactured car engine, this paper puts forward an optimal control method on assembly precision for a remanufactured car engine based on the state space model. This method takes assembly workstation operation and remanufactured part attribute as the input vector reassembly status as the state vector and assembly precision as the output vector. Then, the compensation function of reassembly workstation operation input vector is calculated to direct the optimization of the reassembly process. Finally, a case study of a certain remanufactured car engine crankshaft is constructed to verify the feasibility and effectiveness of the method proposed. Findings The optimal control method on reassembly precision is an effective technology in improving the quality of the remanufactured crankshaft. The average qualified rate of the remanufactured crankshaft increased from 83.05 to 90.97 per cent as shown in the case study. Originality/value The optimal control method on the reassembly precision based on the state space model is available to control the assembly precision, thus enhancing the core competitiveness of the remanufacturing enterprises.

Bayesian monthly index for building activity based on mixed frequencies: the case of Chile

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Byron J. Idrovo-Aguirre ◽  
Javier E. Contreras-Reyes
Keyword(s):  
Kalman Filter ◽  
Bayesian Inference ◽  
State Space ◽  
State Space Model ◽  
Natural Extension ◽  
The State ◽  
Likelihood Method ◽  
Content Type ◽  
Space Model ◽  
Construction Activity

PurposeThis paper combines the objective information of six mixed-frequency partial-activity indicators with assumptions or beliefs (called priors) regarding the distribution of the parameters that approximate the state of the construction activity cycle. Thus, this paper uses Bayesian inference with Gibbs simulations and the Kalman filter to estimate the parameters of the state-space model, used to design the Imacon.Design/methodology/approachUnlike other economic sectors of similar importance in aggregate gross domestic product, such as mining and industry, the construction sector lacked a short-term measure that helps to identify its most recent performance.FindingsIndeed, because these priors are susceptible to changes, they provide flexibility to the original Imacon model, allowing for the assessment of risk scenarios and adaption to the greater relative volatility that characterizes the sector's activity.Originality/valueThe classic maximum likelihood method of estimating the monthly construction activity index (Imacon) is rigid to the incorporation of new measures of uncertainty, expectations or different volatility (risks) levels in the state of construction activity. In this context, this paper uses Bayesian inference with 10,000 Gibbs simulations and the Kalman filter to estimate the parameters of the state-space model, used to design the Imacon, inspired by the original works of Mariano and Murasawa (2003) and Kim and Nelson (1998). Thus, this paper consists of a natural extension of the classic method used by Tejada (2006) in the estimation of the old Imacon.

Modeling of CCLP in koryo extract production

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Ji Chol ◽  
Ri Jun Il
Keyword(s):  
Process Control ◽  
Medical Care ◽  
State Space ◽  
State Space Model ◽  
The State ◽  
Space Model ◽  
Effective Components ◽  
Counter Current

Abstract The modeling of counter-current leaching plant (CCLP) in Koryo Extract Production is presented in this paper. Koryo medicine is a natural physic to be used for a diet and the medical care. The counter-current leaching method is mainly used for producing Koryo medicine. The purpose of the modeling in the previous works is to indicate the concentration distributions, and not to describe the model for the process control. In literature, there are no nearly the papers for modeling CCLP and especially not the presence of papers that have described the issue for extracting the effective components from the Koryo medicinal materials. First, this paper presents that CCLP can be shown like the equivalent process consisting of two tanks, where there is a shaking apparatus, respectively. It allows leachate to flow between two tanks. Then, this paper presents the principle model for CCLP and the state space model on based it. The accuracy of the model has been verified from experiments made at CCLP in the Koryo Extract Production at the Gang Gyi Koryo Manufacture Factory.

Outlier detection in the state space model

1994 ◽  
Vol 20 (2) ◽  
pp. 143-148 ◽  
Author(s):  
Siddhartha Chib ◽  
Ram C. Tiwari
Keyword(s):  
State Space ◽  
Outlier Detection ◽  
State Space Model ◽  
The State ◽  
Space Model

Establishment of State Variable Model of Aeroengine with Improved Least Square Fitting

2010 ◽  
Vol 40-41 ◽  
pp. 27-33 ◽  
Author(s):  
Yi Hui Lin ◽  
Hai Bo Zhang
Keyword(s):  
Differential Equations ◽  
State Space ◽  
State Space Model ◽  
Model Fitting ◽  
The State ◽  
Least Square ◽  
Variable Model ◽  
Space Model ◽  
Fitting Method ◽  
Linear Differential

The method of state space model fitting is carried out by using the linear relation of the variable of the differential equations and separating the steady process and instant process to eliminate the steady errors course by instant errors. The improved fitting method is without solving the linear differential equations or using any iterative methods. The coefficient of the state space model can be solve simply using matrix operation under the premise of high accuracy, so it has a higher computational efficiency than former least square method. And this method can also be used with other fitting method. Finally, to illustrate the validity and accuracy of the improved method, a small perturbation state space model of a certain turboshaft engine model has been established by this method, and the simulation result between state space model and nonlinear model was also compared. Also, the state space model could be applied to fault diagnosis and control system design for aeroengines.

scholarly journals Model Predictive Control with a Relaxed Cost Function for Constrained Linear Systems

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
David Sotelo ◽  
Antonio Favela-Contreras ◽  
Viacheslav V. Kalashnikov ◽  
Carlos Sotelo
Keyword(s):  
Model Predictive Control ◽  
Cost Function ◽  
State Space ◽  
Predictive Control ◽  
Discrete Time ◽  
Control Strategy ◽  
Control Strategies ◽  
State Space Model ◽  
Control Technique ◽  
Space Model

The Model Predictive Control technique is widely used for optimizing the performance of constrained multi-input multi-output processes. However, due to its mathematical complexity and heavy computation effort, it is mainly suitable in processes with slow dynamics. Based on the Exact Penalization Theorem, this paper presents a discrete-time state-space Model Predictive Control strategy with a relaxed performance index, where the constraints are implicitly defined in the weighting matrices, computed at each sampling time. The performance validation for the Model Predictive Control strategy with the proposed relaxed cost function uses the simulation of a tape transport system and a jet transport aircraft during cruise flight. Without affecting the tracking performance, numerical results show that the execution time is notably decreased compared with two well-known discrete-time state-space Model Predictive Control strategies. This makes the proposed Model Predictive Control mainly suitable for constrained multivariable processes with fast dynamics.

scholarly journals A Stochastic and State Space Model for Tumour Growth and Applications

2009 ◽  
Vol 10 (2) ◽  
pp. 117-138 ◽  
Author(s):  
Wai-Yuan Tan ◽  
Weiming Ke ◽  
G. Webb
Keyword(s):  
State Space ◽  
Stochastic System ◽  
Tumour Growth ◽  
Deterministic Model ◽  
State Space Model ◽  
Tumour Cells ◽  
The State ◽  
System Model ◽  
State Variables ◽  
Space Model

We develop a state space model documenting Gompertz behaviour of tumour growth. The state space model consists of two sub-models: a stochastic system model that is an extension of the deterministic model proposed by Gyllenberg and Webb (1991), and an observation model that is a statistical model based on data for the total number of tumour cells over time. In the stochastic system model we derive through stochastic equations the probability distributions of the numbers of different types of tumour cells. Combining with the statistic model, we use these distribution results to develop a generalized Bayesian method and a Gibbs sampling procedure to estimate the unknown parameters and to predict the state variables (number of tumour cells). We apply these models and methods to real data and to computer simulated data to illustrate the usefulness of the models, the methods, and the procedures.

Sign in / Sign up

Export Citation Format

Share Document