scholarly journals An Unobtrusive and Non-Contact Method for Respiratory Measurement With Respiratory Region Detecting Algorithm Based on Depth Images

IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 8300-8315
Author(s):  
Chenglu Sun ◽  
Wei Li ◽  
Chen Chen ◽  
Zeyu Wang ◽  
Wei Chen
Keyword(s):  
Contact Method ◽  
Depth Images ◽  
Respiratory Measurement

Pathophysiological function of the mitochondria as a calcium reservoir: Quantitative x-ray microanalysis

1990 ◽  
Vol 48 (2) ◽  
pp. 164-165
Author(s):  
K. Teraoka ◽  
N. Kaneko ◽  
Y. Horikawa ◽  
T. Uchida ◽  
R. Matsuda ◽  
...  
Keyword(s):  
Bolus Injection ◽  
Contact Method ◽  
X Ray

The aim of this study was to elucidate the role of the mitochondria as a store of calcium(Ca) under the condition of pathophysiological Ca overload induced by a rise in extracellular Ca concentration and the administration of isoproterenol.Eight rats were employed, and hearts were perfused as in the Langendorff method with Krebs-Henseleit solution gassed with 95% O2 and 5% CO2. Tow specimens were perfused with 2mM Ca for 30 min, and 2 were perfused with 5.5 mM Ca for 20 min. 4 specimens were perfused with 2 mM Ca for 5 min, and of these 4, 2 were infused with 10-7 mM/kg/min. isoproterenol for 5 min, and 2 were given a bolus injection of 3 x 10-7 mM isoproterenol. After rapid-cryofixation by the metal-mirror contact method with a Reichert-Jung KF80/MM80, and cryosectioning at -160 to -180° C with a Reichert-Jung Ultracut Fc-4E, ultrathin specimens (100nm) were free-ze-dreid for several hours at 10-5 Torr in the JEOL FD 7000, and mitochondrial Ca was determined by quantitative x-ray micranalysis (JEOL 1200EX, LINK AN 10000S).

Indian Sign Language Recognition on PYNQ Board

2020 ◽  
Vol 13 ◽  
Author(s):  
Sukhendra Singh ◽  
G. N. Rathna ◽  
Vivek Singhal
Keyword(s):  
Sign Language ◽  
Hand Gesture ◽  
Language Recognition ◽  
Sign Language Recognition ◽  
Hand Gestures ◽  
Depth Images ◽  
Kinect Camera ◽  
Impaired People ◽  
Web Camera ◽  
Indian Sign Language

Introduction: Sign language is the only way to communicate for speech-impaired people. But this sign language is not known to normal people so this is the cause of barrier in communicating. This is the problem faced by speech impaired people. In this paper, we have presented our solution which captured hand gestures with Kinect camera and classified the hand gesture into its correct symbol. Method: We used Kinect camera not the ordinary web camera because the ordinary camera does not capture its 3d orientation or depth of an image from camera however Kinect camera can capture 3d image and this will make classification more accurate. Result: Kinect camera will produce a different image for hand gestures for ‘2’ and ‘V’ and similarly for ‘1’ and ‘I’ however, normal web camera will not be able to distinguish between these two. We used hand gesture for Indian sign language and our dataset had 46339, RGB images and 46339 depth images. 80% of the total images were used for training and the remaining 20% for testing. In total 36 hand gestures were considered to capture alphabets and alphabets from A-Z and 10 for numeric, 26 for digits from 0-9 were considered to capture alphabets and Keywords. Conclusion: Along with real-time implementation, we have also shown the comparison of the performance of the various machine learning models in which we have found out the accuracy of CNN on depth- images has given the most accurate performance than other models. All these resulted were obtained on PYNQ Z2 board.

scholarly journals An explanatory study of the use of e-mail investor communication by South African listed companies

2016 ◽  
Vol 18 (1) ◽  
Author(s):  
Roelof Baard ◽  
George Nel
Keyword(s):  
Listed Companies ◽  
Future Research ◽  
Contact Method ◽  
Interactive Communication ◽  
Handling Performance ◽  
Corporate Websites ◽  
Use Of Social Media ◽  
Almost All ◽  
The Cost ◽  
E Mail

Background: Although research shows that almost all listed companies have corporate websites with dedicated investor relations (IR) sections that enable companies to ‘push’ information to investors, it was argued that such an asymmetrical approach to communication is insufficient for companies wishing to exercise good IR. The purpose of this study was to test the effectiveness of the Internet to act as a mechanism to achieve more interactive communication between companies and investors.Objectives: The objectives of the study were to measure the responsiveness, timeliness and relevance of companies’ responses to e-mail requests, and to test for the determinants (size, market-to-book ratio, profitability, leverage and liquidity) thereof.Method: The mystery investor approach and a content analysis were used to study the e-mail handling performance of companies. The associations between company-specific characteristics were statistically tested.Results: It was found that the e-mail handling performance of companies in this study was poor compared with previous studies. Significant relationships between company size and responsiveness and relevance, and between market-to-book ratio and relevance were reported, as well as between the contact method used to request information and relevance and the use of social media and timeliness.Conclusion: Specific areas where companies could improve their investor communications were identified. The need for further research was discussed to explain some of the relationships found, as well as those not found, in contrast to what was expected. Future research is warranted to examine the relationship between the e-mail handling performance of companies and information asymmetry and the cost of equity of companies.

Research of vibration and crack propagation controls on an asymmetrical cracked rotor

2021 ◽  
pp. 107754632199822
Author(s):  
Jun Liu ◽  
Zhu Han ◽  
Rong Hu
Keyword(s):  
Crack Propagation ◽  
Vibration Suppression ◽  
Control Method ◽  
Element Model ◽  
Electromagnetic Actuator ◽  
Contact Method ◽  
Cracked Rotor ◽  
Mapping Model ◽  
Differential Control ◽  
Opening And Closing

To investigate vibration characteristics and delay crack propagations of an asymmetric cracked rotor, the 3D finite element model of the rotor system with a nonlinear contact method is established. Resonance characteristics of the asymmetrical rotor without a crack and within different locations of a crack are investigated systematically. Numerical results show that a crack affects vibration frequencies and the unstable region of the rotor. Meanwhile, an improved proportional integral differential control method with the electromagnetic actuator is used to accomplish the delay crack propagation and the vibration suppression. Based on the mapping model of opening and closing states of a crack, the effects of rotational speeds, an unbalance, and asymmetries of the rotor are discussed in detail. Experimental results show that vibrations and the breathing behavior of cracks in the rotor with the electromagnetic actuator can be suppressed, and the effectiveness of the proposed mapping model of opening and closing states of a crack is verified.

An Instrument to Measure the Vertical Wicking of Fabrics by Non-Contact Method Using Color Sensors.

2020 ◽  
pp. 1-14
Author(s):  
S. Chinnadurai ◽  
D. Raja ◽  
S. Priyalatha ◽  
S. S. Suresh ◽  
C. Prakash
Keyword(s):  
Contact Method ◽  
Vertical Wicking ◽  
Color Sensors

scholarly journals Noncontact restoration of missing parts of stone Buddha statue based on three-dimensional virtual modeling and assembly simulation

2020 ◽  
Vol 8 (1) ◽  
Author(s):  
Young Hoon Jo ◽  
Seonghyuk Hong ◽  
Seong Yeon Jo ◽  
Yoon Mi Kwon
Keyword(s):  
3D Printing ◽  
Reference Model ◽  
Three Dimensional ◽  
Contact Method ◽  
Cultural Artifacts ◽  
Analog Simulation ◽  
Remarkable Case ◽  
Interface Surface ◽  
Restoration Technique ◽  
Assembly Simulation

Abstract Three-dimensional (3D) digital technology is an essential conservation method that complements the traditional restoration technique of cultural artifacts. In this study, 3D scanning, virtual restoration modeling, and 3D printing were used as a noncontact approach for restoring a damaged stone-seated Bodhisattva (stone Buddha statue). First, a 3D model with an average point density of 0.2 mm was created by integrating the fixed high-precision scanning of the exterior and the handheld mid-precision scanning of the interior excavated hole. Using a 3D deterioration map of the stone Buddha statue, the area of the missing parts was measured to be 400.1 cm2 (5.5% of the total area). Moreover, 257.1 cm2 (64.2% of the missing part area) of four parts, including the head, surrounding area of the Baekho, right ear, and right eye, for which symmetry was applicable for modeling or there could be ascertainable historical evidence for the total missing parts, was selected for restoration. The virtual restoration of the missing parts of the stone Buddha statue was performed using a haptic modeling system in the following order. First, the location of the three fragments detached from the head was determined. Next, a reference model was selected, and its symmetrization and modification with respect to the original model were conducted. Further, estimation modeling and outer shape description were achieved through historical research and consultation with experts. The heuristic-based assembly suitability of the created virtual restoration model (461 cm3) was verified by design mockup printing and digital–analog simulation. In particular, to address assembly interference, the interface surface was modified and reprocessed several times. Accordingly, the volume of the final design mockup decreased by 5.2% (437 cm3). Photopolymerization 3D printing technology was used for the actual restoration of the stone Buddha statue, and considering the surface roughness, the layer thickness of the material used for restoration was set at 0.10 mm. Finally, the surface of the printed output was colored to prevent yellowing and joined to the missing parts of the stone Buddha statue. This study presents a remarkable case of shifting from the traditional manual-contact method to the contactless digital method for restoring artifacts and is expected to largely contribute to increasing the usability of digital technologies in the restoration of cultural artifacts.

Sign in / Sign up

Export Citation Format

Share Document