Microstrip patch antenna panel for large aperture L-band phased array

Author(s):  
N. Chamberlain ◽  
L. Amaro ◽  
E. Oakes ◽  
R. Hodges ◽  
S. Spitz ◽  
...  
2015 ◽  
Vol 13 ◽  
pp. 251-268 ◽  
Author(s):  
D. Vollbracht

Abstract. The antenna cross polarization suppression (CPS) is of significant importance for the accurate calculation of polarimetric weather radar moments. State-of-the-art reflector antennas fulfill these requirements, but phased array antennas are changing their CPS during the main beam shift, off-broadside direction. Since the cross polarization (x-pol) of the array pattern is affected by the x-pol element factor, the single antenna element should be designed for maximum CPS, not only at broadside, but also for the complete angular electronic scan (e-scan) range of the phased array antenna main beam positions. Different methods for reducing the x-pol radiation from microstrip patch antenna elements, available from literature sources, are discussed and summarized. The potential x-pol sources from probe fed microstrip patch antennas are investigated. Due to the lack of literature references, circular and square shaped X-Band radiators are compared in their x-pol performance and the microstrip patch antenna size variation was analyzed for improved x-pol pattern. Furthermore, the most promising technique for the reduction of x-pol radiation, namely "differential feeding with two RF signals 180° out of phase", is compared to single fed patch antennas and thoroughly investigated for phased array applications with simulation results from CST MICROWAVE STUDIO (CST MWS). A new explanation for the excellent port isolation of dual linear polarized and differential fed patch antennas is given graphically. The antenna radiation pattern from single fed and differential fed microstrip patch antennas are analyzed and the shapes of the x-pol patterns are discussed with the well-known cavity model. Moreover, two new visual based electromagnetic approaches for the explanation of the x-pol generation will be given: the field line approach and the surface current distribution approach provide new insight in understanding the generation of x-pol component in microstrip patch antenna radiation patterns.


2013 ◽  
Vol 347-350 ◽  
pp. 1786-1789
Author(s):  
Kang Ding ◽  
Tong Bin Yu ◽  
Dong Fang Guan ◽  
Cheng Peng

This paper proposes a novel stacked tri-band circularly polarized antenna which has three independent ports. To obtain tri-band operation, a stacked three layers of microstrip antenna working at different frequency is presented. Each of them is fed by dual feed probes. The simulated results show that the antenna can cover Compass Navigation Satellite System CNSS B3 1.268 GHz, L band 1.615 GHz and S band 2.49 GHz. The proposed antenna has achieved a bandwidth of 3.1%, 6.8% and 2.3% at each band, respectively. It exhibits small axial ratio under 3dB in three bands for the CNSS applications. Details of the proposed antenna design and results for the obtained tri-band circularly polarized performances are presented and discussed.


Sign in / Sign up

Export Citation Format

Share Document