Research on the mechanism of aeoian vibration suppression and piezoelectric energy capture of transmission line based on nonlinear energy sink

2021 ◽  
Author(s):  
Gao Xin ◽  
Pei Sheng ◽  
Lin Tao ◽  
Fu Junjie
Keyword(s):  
Transmission Line ◽  
Vibration Suppression ◽  
Nonlinear Energy Sink ◽  
Energy Capture ◽  
Piezoelectric Energy ◽  
Energy Sink ◽  
Nonlinear Energy

A Variant Nonlinear Energy Sink for Vibration Suppression and Energy Harvesting

2018 ◽  
Author(s):  
Xiaolin Li ◽  
Kefu Liu ◽  
Liuyang Xiong ◽  
Lihua Tang
Keyword(s):  
Energy Harvesting ◽  
Vibration Suppression ◽  
System Modeling ◽  
Nonlinear Energy Sink ◽  
Initial Energy ◽  
Piezoelectric Energy ◽  
Thin Steel ◽  
Energy Sink ◽  
Thin Steel Plate ◽  
Nonlinear Energy

In this paper a variant nonlinear energy sink (NES) is developed for the purpose of simultaneous vibration suppression and energy harvesting in a broad frequency band. The NES consists of a cantilever beam attached by a mass at its free end and a pair of so-called double-stop blocks. The beam is formed by a piezoelectric energy harvester and a thin steel plate. It is placed between the double-stop blocks. The constraint of the double-stop blocks forces the beam to deflect nonlinearly. First, the developed apparatus is described. Subsequently, system modeling and parameter identification are addressed. The performance of the apparatus under transient responses is examined through both numerical simulation and experimental study. The results show that the proposed apparatus behaves similarly as the NES with the following features: 1:1 resonance, targeted energy transfer, initial energy dependence, etc.

Dynamics and evaluation of a nonlinear energy sink integrated by a piezoelectric energy harvester under a harmonic excitation

2018 ◽  
Vol 25 (4) ◽  
pp. 851-867 ◽  
Author(s):  
Xiang Li ◽  
Ye-Wei Zhang ◽  
Hu Ding ◽  
Li-Qun Chen
Keyword(s):  
Energy Harvesting ◽  
Vibration Suppression ◽  
Average Energy ◽  
Nonlinear Energy Sink ◽  
Harmonic Excitation ◽  
Response Curves ◽  
Piezoelectric Energy ◽  
Energy Sink ◽  
Piezoelectric Harvester ◽  
Nonlinear Energy

The harmonically excited structure coupled with the nonlinear energy sink (NES) and a piezoelectric harvester is investigated. The complexification-averaging method is developed to analyze ordinary differential equations which also include one first order differential equation. Effects of varying parameters for the piezoelectric harvester on the saddle-node bifurcation and the Hopf bifurcation are explored. Analytical results of the amplitude–frequency response curves are verified by the numerical evidence. Global bifurcations for NES parameters are presented. Comparisons of periodic results for bifurcation diagrams are performed both numerically and analytically as well as their stable ranges. The integration of nonlinear vibration suppression and energy harvesting is discussed. The output voltage, power, displacement transmissibility, and average energy are calculated to explore the integration. Quasi-periodic responses near the resonance frequency contribute to effectively reducing the resonant amplitude and improving the bandwidth of energy harvesting, as well as targeted energy transfer. Results confirm that the integration of vibration suppression and piezoelectric energy harvesting can be enhanced by adjusting cubic nonlinearity.

scholarly journals Piezoelectric energy harvesting with a nonlinear energy sink

2016 ◽  
Vol 28 (3) ◽  
pp. 307-322 ◽  
Author(s):  
Yu Zhang ◽  
Lihua Tang ◽  
Kefu Liu
Keyword(s):  
Energy Harvesting ◽  
Vibration Suppression ◽  
System Modeling ◽  
Nonlinear Energy Sink ◽  
Initial Energy ◽  
Piezoelectric Energy Harvesting ◽  
Piezoelectric Energy ◽  
Voltage Output ◽  
Energy Sink ◽  
Nonlinear Energy

This article presents a novel piezoelectric energy-harvesting device. Different from the existing designs in the literature, the proposed device is based on the principle of nonlinear energy sink in order to achieve simultaneous broadband energy harvesting from the nonlinear energy sink and vibration suppression for the primary structure. First, the concept of the proposed design is described. Subsequently, system modeling and parameter identification are addressed. The performance of the apparatus under transient responses is examined through both numerical simulation and experimental study. The results show that the proposed apparatus behaves similarly as the nonlinear energy sink with the following features: 1:1 resonance, targeted energy transfer, initial energy dependence, and so on. Broadband voltage output is achieved when the nonlinear energy sink is activated.

The effects of nonlinear energy sink and piezoelectric energy harvester on aeroelastic instability of an airfoil

2021 ◽  
pp. 107754632199358
Author(s):  
Ali Fasihi ◽  
Majid Shahgholi ◽  
Saeed Ghahremani
Keyword(s):  
Energy Harvester ◽  
Equations Of Motion ◽  
Continuation Method ◽  
Dynamical Behavior ◽  
Harmonic Balance Method ◽  
Nonlinear Energy Sink ◽  
Piezoelectric Energy ◽  
Energy Sink ◽  
Two Degree Of Freedom ◽  
Nonlinear Energy

The potential of absorbing and harvesting energy from a two-degree-of-freedom airfoil using an attachment of a nonlinear energy sink and a piezoelectric energy harvester is investigated. The equations of motion of the airfoil coupled with the attachment are solved using the harmonic balance method. Solutions obtained by this method are compared to the numerical ones of the pseudo-arclength continuation method. The effects of parameters of the integrated nonlinear energy sink-piezoelectric attachment, namely, the attachment location, nonlinear energy sink mass, nonlinear energy sink damping, and nonlinear energy sink stiffness on the dynamical behavior of the airfoil system are studied for both subcritical and supercritical Hopf bifurcation cases. Analyses demonstrate that absorbing vibration and harvesting energy are profoundly affected by the nonlinear energy sink parameters and the location of the attachment.

Nonlinear Normal Modes of a Continuous Cantilever Beam with Nonlinear Energy Sink Absorber

2013 ◽  
Vol 325-326 ◽  
pp. 214-217
Author(s):  
Yong Chen ◽  
Yi Xu
Keyword(s):  
Cantilever Beam ◽  
Vibration Suppression ◽  
Normal Modes ◽  
Nonlinear Energy Sink ◽  
Nonlinear Normal Modes ◽  
Harmonic Excitation ◽  
Energy Sink ◽  
Nonlinear Normal ◽  
Nonlinear Energy ◽  
Good Agreement

Using nonlinear energy sink absorber (NESA) is a good countermeasure for vibration suppression in wide board frequency region. The nonlinear normal modes (NNMs) are helpful in dynamics analysis for a NESA-attached system. Being a primary structure, a cantilever beam whose modal functions contain hyperbolic functions is surveyed, in case of being attached with NESA and subjected to a harmonic excitation. With the help of Galerkins method and Raushers method, the NNMs are obtained analytically. The comparison of analytical and numerical results indicates a good agreement, which confirms the existence of the nonlinear normal modes.

Integration of a nonlinear energy sink and a piezoelectric energy harvester

2017 ◽  
Vol 38 (7) ◽  
pp. 1019-1030 ◽  
Author(s):  
Xiang Li ◽  
Yewei Zhang ◽  
Hu Ding ◽  
Liqun Chen
Keyword(s):  
Energy Harvester ◽  
Nonlinear Energy Sink ◽  
Piezoelectric Energy ◽  
Energy Sink ◽  
Nonlinear Energy

A Non-Traditional Variant Nonlinear Energy Sink: Transient Responses

2019 ◽  
Author(s):  
Youzuo Jin ◽  
Kefu Liu ◽  
Deli Li ◽  
Liuyang Xiong ◽  
Lihua Tang
Keyword(s):  
Energy Harvester ◽  
Vibration Suppression ◽  
System Modeling ◽  
Nonlinear Energy Sink ◽  
Initial Energy ◽  
Transient Responses ◽  
Continuous Contact ◽  
Magnet Coil ◽  
Energy Sink ◽  
Nonlinear Energy

Abstract In this paper, a non-traditional variant nonlinear energy sink (NES) is developed for simultaneous vibration suppression and energy harvesting in a broad frequency band. The non-traditional variant NES consists of a cantilever beam attached by a pair of magnets at its free end, a pair of the so-called continuous-contact blocks, and a pair of coils. The beam is placed between the continuous-contact blocks. The constraint of the continuous-contact blocks forces the beam to deflect nonlinearly. Each of the magnet-coil pairs forms an electromagnetic energy harvester. Different from a traditional way that attaches the coils to the primary mass, the developed setup has the coils fixed to the base. First, the developed apparatus is described. Subsequently, the system modeling and parameter identification are addressed. The performance of the apparatus under transient responses is examined by using computer simulation. The results show that the proposed apparatus behaves similarly as the NES with the following features: 1:1 resonance, targeted energy transfer, initial energy dependence, etc.

scholarly journals Application of Nonlinear Energy Sink for Rotor System Vibration Suppression

2020 ◽  
Vol 56 (15) ◽  
pp. 191
Author(s):  
YAO Hongliang ◽  
CAO Yanbo ◽  
ZHANG Qin ◽  
WEN Bangchun
Keyword(s):  
Vibration Suppression ◽  
Nonlinear Energy Sink ◽  
Rotor System ◽  
System Vibration ◽  
Energy Sink ◽  
Nonlinear Energy

Dynamic Analysis of 1-Dof and 2-Dof Nonlinear Energy Sink With Geometrically Nonlinear Damping and Combined Stiffness

2021 ◽  
Author(s):  
Yunfa Zhang ◽  
Xianren Kong ◽  
Chengfei Yue ◽  
Huai Xiong
Keyword(s):  
Bifurcation Analysis ◽  
Vibration Suppression ◽  
Harmonic Balance Method ◽  
Nonlinear Energy Sink ◽  
Nonlinear Damping ◽  
Linear Oscillator ◽  
Frequency Detuning ◽  
Incremental Harmonic Balance Method ◽  
Energy Sink ◽  
Nonlinear Energy

Abstract Nonlinear energy sink (NES) refers to a typical passive vibration device connected to linear or weakly nonlinear structures for vibration absorption and mitigation. This study investigates the dynamics of 1-dof and 2-dof NES with nonlinear damping and combined stiffness connected to a linear oscillator. For the system of 1-dof NES, a truncation damping and failure frequency are revealed through bifurcation analysis using the complex variable averaging method. The frequency detuning interval for the existence of the strongly modulated response (SMR) is also reported . For the system of 2-dof NES, it is reported in a similar bifurcation analysis that the mass distribution between NES affects the maximum value of saddle-node bifurcation. To obtain the periodic solution of the 2-dof NES system with the consideration of frequency detuning, the incremental harmonic balance method (IHB) and Floquet theory are employed. The corresponding response regime is obtained by Poincare mapping, it shows that the responses of the linear oscillator and 2-dof NES are not always consistent, and 2-dof NES can generate extra SMR than 1-dof NES. Finally, the vibration suppression effect of the proposed NES with nonlinear damping and combined stiffness is analyzed and verified by the energy spectrum, and it also shows that the 2-dof NES system demonstrates better performance.

Sign in / Sign up

Export Citation Format

Share Document