System-on-Package Ultra Wideband Transmitter with Integrated Bandpass Filter and Broad Band Planar Antenna

Author(s):  
Myunghoi Kim ◽  
Junwoo Lee ◽  
Joungho Kim ◽  
Young-Jin Park
2018 ◽  
Vol 10 (4) ◽  
pp. 487-496 ◽  
Author(s):  
Hany A. Atallah ◽  
Adel B. Abdel-Rahman ◽  
Kuniaki Yoshitomi ◽  
Ramesh K. Pokharel

AbstractIn this paper, a new miniaturized frequency agile filter-antenna with a wide reconfigurable frequency band is proposed for interweave cognitive radios (CRs). A tunable bandpass filter (BPF) composed of a symmetrical ring resonator is cascaded to the feed line of an ultra-wideband planar antenna. The structure of the proposed ring resonator BPF is simple and compact so that the total size of the proposed filter-antenna is smaller than that of a conventional system made of a separate antenna and BPF. The reconfigurability of the proposed filter-antenna is achieved by changing the operating frequency of the BPF by loading the ring resonator with a single varactor diode at its center. The fabricated prototype has successfully achieved a wide operational bandwidth of 1.43 GHz which covers continuous narrow bands from 4.65 to 6.08 GHz. Moreover, the operating tunable narrow bands have stable radiation characteristics. Good agreement between measurement and simulation results is demonstrated.


2021 ◽  
Vol 1745 (1) ◽  
pp. 012064
Author(s):  
B A Belyaev ◽  
S A Khodenkov ◽  
N A Shepeta ◽  
A M Popov

Author(s):  
Hemachandra reddy Gorla ◽  
Kaylyn F. Shaw ◽  
David W. Addison ◽  
Frances J. Harackiewicz

Author(s):  
Gaurav Saxena ◽  
Priyanka Jain ◽  
Y. K. Awasthi

Abstract In this paper, a ultra-wideband (UWB) bandpass filter with stopband characteristics is presented using a multi-mode resonator (MMR) technique. An MMR is formed by loading three dumbbell-shaped (Mickey and circular) shunt stubs placed in the center and two symmetrical locations from ports, respectively. Three circular and arrowhead defected ground structures on the ground plane are introduced to achieve UWB bandwidth with a better roll-off rate. The proposed filter exhibits stopband characteristics from 10.8 to 20 GHz with a 0.4 dB return loss. The group delay and roll-off rate of the designed filter are <0.30 ns in the passband and 16 dB/GHz at lower and higher cut-off frequencies, respectively. The dimension of the filter is 0.74λg × 0.67λg mm2 and was fabricated on a cost-effective substrate. All simulated results are verified through the experimental results.


Sign in / Sign up

Export Citation Format

Share Document