Avoiding Medium Voltage Cable Joint Failure: Development of a Real-Time Prognostic Tool

Author(s):  
P. L. Lewin ◽  
T. Coleman ◽  
N. Koumbari ◽  
Y. Liu ◽  
S. Christou
Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5403
Author(s):  
Robert Małkowski ◽  
Michał Izdebski ◽  
Piotr Miller

The development of renewable energy, including wind farms, photovoltaic farms as well as prosumer installations, and the development of electromobility pose new challenges for network operators. The results of these changes are, among others, the change of network load profiles and load flows determining greater volatility of voltages. Most of the proposed solutions do not assume a change of the transformer regulator algorithm. The possibilities of improving the quality of regulation, which can be found in the literature, most often include various methods of coordination of the operation of the transformer regulator with various devices operating in the Medium-Voltage (MV) network. This coordination can be decentralized or centralized. Unfortunately, the proposed solutions often require costly technical resources and/or large amounts of real-time data monitoring. The goal of the authors was to create an algorithm that extends the functionality of typical transformer control algorithms. The proposed solution allows for reducing the risk of voltage collapse. The performance of the proposed algorithm was validated using multivariate computer simulations and tests with the use of a physical model of the distribution network. The DIgSILENT PowerFactory environment was used to develop the simulation model of the proposed algorithm. Then, tests were conducted on real devices installed in the LINTEˆ2 Laboratory at the Gdańsk University of Technology, Poland. Selected test results are included in this paper. All results have shown that the proposed algorithm makes it possible to increase the reserve of the voltage stability of the node, in which it is applied, thus mitigating the risk of a voltage collapse occurring. The proposed algorithm does not require complex and costly technical solutions. Owing to its simplicity, it has a high potential for practical application, as confirmed by the real-time control experiment in the laboratory.


Author(s):  
H. Prasad ◽  
T. Maity

Purpose Purpose – This paper presents the performance of medium voltage induction motor drive fed through a bidirectional quasi z-source inverter (BQ-ZSI). By controlling the shoot-through duty ratio, BQ-ZSI is able to produce desired stable ac output voltage even during the situation of critical power supply variation. BQ-ZSI based drive has unique properties like boosting the output voltage during voltage sag, reducing harmonic distortion and improving the input power factor. Generally, adjustable speed drives (ASD) are interrupted due to voltage sag in input supply that causes manufacturing and commercial losses. Replacing the conventional converter with BQ-ZSI, it can eliminate those common operational constraints. Design/methodology/approach This purpose is validated through simulations using real-time digital simulator (RTDS). RTDS is based on FPGA that interfaces the digital and analog I/O ports of the external hardware device. The IGBT based BQ-ZSI closed loop induction motor drive is modelled in SIMULINK and analysed through state space averaging technique. The suitable controllers are assigned and implemented on FPGA. The performance of the whole system is executed by offline simulation and analysed in hardware-in-loop (HIL) real time simulator with fixed-time step. HIL simulation plays important role in design and development stage for BQ-ZSI based medium voltage drives where virtual plant is executed instead of physical plant. Findings Real-time simulation results show the performance of 225KW, 3.3KV induction motor for BQ-ZSI based motor drive under both steady state and dynamic conditions. The applied closed loop control method provides nearly zero steady state speed error at any operating frequency. Originality/value The application of BQ-ZSI is explored for medium voltage drive to solve the issues of power supply quality through the design of suitable control solution. Performance results presented in this paper can help in development of simple and low cost prototype controller for the drive.


2013 ◽  
Vol 51 (8) ◽  
pp. 2766-2768 ◽  
Author(s):  
J. G. L. Costa ◽  
A. C. A. V. Carneiro ◽  
A. T. Tavares ◽  
G. M. Q. Andrade ◽  
D. V. Vasconcelos-Santos ◽  
...  

Energies ◽  
2018 ◽  
Vol 11 (6) ◽  
pp. 1405 ◽  
Author(s):  
Jiangjun Ruan ◽  
Qinghua Zhan ◽  
Liezheng Tang ◽  
Ke Tang

Sign in / Sign up

Export Citation Format

Share Document