The Relationship Between Empathy and Civic-Mindedness in First-Year Engineering Students

2021 ◽  
Author(s):  
Athena Lin ◽  
Justin L. Hess ◽  
Aristides P. Carrillo Fernandez
Keyword(s):  
Engineering Students ◽  
First Year ◽  
Civic Mindedness ◽  
The Relationship

scholarly journals Correlation between students’ workload and attendance as related towards final grades: A case of study on Statistics for first-year Engineering students.

2020 ◽  
Author(s):  
Carlos De la Calle-Arroyo ◽  
Licesio Rodríguez-Aragón
Keyword(s):  
Engineering Students ◽  
High Ratio ◽  
First Year ◽  
Monitoring Strategy ◽  
First Year Students ◽  
Student Workload ◽  
Engineering Degree ◽  
The Subject ◽  
Final Grades ◽  
The Relationship

In this work, a monitoring experience of student workload and attendance is presented. During four academic years, from 2015 until 2019, first-year students of an Engineering degree have been asked, three times a week, to estimate their autonomous workload devoted to the Statistics subject. The monitoring strategy has been anonymous, open and voluntary and has shown a high ratio of participation: 407 students out of 433. To generate the final dataset this information has been combined with attending records to classroom-based lectures and final grades achieved. Results indicate that declared student’s workload hardly reaches the 90 hours of autonomous work established in the ECTS ratio of our university. Nonparametric comparisons show strong statistical evidences of the relationship between final grades in the subject and declared workload and attendance. We find that attendance is crucial in order to achieve a homogeneous workload along the semester and a success in the subject’s grading.

The Need to Belong and the Relationship Between Loneliness and Health

2014 ◽  
Vol 22 (4) ◽  
pp. 194-201 ◽  
Author(s):  
Freda-Marie Hartung ◽  
Britta Renner
Keyword(s):  
Individual Differences ◽  
Social Isolation ◽  
Social Situation ◽  
First Year ◽  
Health State ◽  
Need To Belong ◽  
First Year University ◽  
Perceived Social Isolation ◽  
The Impact ◽  
The Relationship

Humans are social animals; consequently, a lack of social ties affects individuals’ health negatively. However, the desire to belong differs between individuals, raising the question of whether individual differences in the need to belong moderate the impact of perceived social isolation on health. In the present study, 77 first-year university students rated their loneliness and health every 6 weeks for 18 weeks. Individual differences in the need to belong were found to moderate the relationship between loneliness and current health state. Specifically, lonely students with a high need to belong reported more days of illness than those with a low need to belong. In contrast, the strength of the need to belong had no effect on students who did not feel lonely. Thus, people who have a strong need to belong appear to suffer from loneliness and become ill more often, whereas people with a weak need to belong appear to stand loneliness better and are comparatively healthy. The study implies that social isolation does not impact all individuals identically; instead, the fit between the social situation and an individual’s need appears to be crucial for an individual’s functioning.

Thathir Quality Scholarship Program For Students At University level

2018 ◽  
Vol 2 (3) ◽  
pp. 206-219
Author(s):  
Louay Qais Abdullah ◽  
Duraid Faris Khayoun
Keyword(s):  
College Students ◽  
Life Sciences ◽  
Economic Feasibility ◽  
First Year ◽  
Grant Program ◽  
Scholarship Program ◽  
University Level ◽  
Faculty Of Education ◽  
The University ◽  
The Relationship

The study focused basically on measuring the relationship between the material cost of the students benefits program and the benefits which are earned by it, which was distributed on college students in the initial stages (matinee) and to show the extent of the benefits accruing from the grant program compared to the material burdens which matched and the extent of success or failure of the experience and its effect from o scientific and side on the Iraqi student through these tough economic circumstances experienced by the country in general, and also trying to find ways of proposed increase or expansion of distribution in the future in the event of proven economic feasibility from the program. An data has been taking from the data fro the Department of Financial Affairs and the Department of Studies and Planning at the University of Diyala with taking an data representing an actual and minimized pattern and questionnaires to a sample of students from the Department of Life Sciences in the Faculty of Education of the University of Diyala on the level of success and failure of students in the first year of the grant and the year before for the purpose of distribution comparison. The importance of the study to measure the extent of interest earned in comparision whit the material which is expenseon the program of grant (grant of students) to assist the competent authorities to continue or not in the program of student grants for the coming years.

REVERSE ENGINEERING: TENSION RATCHET DISSECTION PROJECT

2011 ◽  
Author(s):  
Jeremiah Vanderlaan ◽  
Josh Richert ◽  
James Morrison ◽  
Thomas Doyle
Keyword(s):  
Reverse Engineering ◽  
Engineering Students ◽  
Measurement Techniques ◽  
First Year ◽  
Stepping Stones ◽  
First Year Students ◽  
Final Project ◽  
Undergraduate Study ◽  
Solid Edge ◽  
Part Modeling

We are a group of engineering students, in our first year of undergraduate study. We have been selected from one thousand first year students and have competed and won the PACE competition. All engineers share a common general first year, but we have been accepted into Civil and Mechanical engineering. This project was assigned as the final project in the Design and Graphics course. The project we are tasked with, called the Cornerstone Design Project, is to first dissect a product, discover how it works, dimension each part and create a fully assembled model using CAD software (Solid Edge V20 in our case). As part of discovering how it works we must benchmark it so the device can be compared with competing products. The goal of the project is to develop a full understanding of part modeling and assembly in Solid Edge, learn proper measurement techniques, and learn the process of reverse engineering and product dissection. All of these tasks were stepping stones to help us fully understand how the device, and all its components, work.

Implementation of the Second-year course in an Engineering Professional Spine

2018 ◽  
Author(s):  
Umar Iqbal ◽  
Deena Salem ◽  
David Strong
Keyword(s):  
Learning Outcomes ◽  
Research University ◽  
Engineering Students ◽  
Employability Skills ◽  
First Year ◽  
Computer Engineering ◽  
Core Courses ◽  
Second Year ◽  
First Time ◽  
Academic Year

The objective of this paper is to document the experience of developing and implementing a second-year course in an engineering professional spine that was developed in a first-tier research university and relies on project-based core courses. The main objective of this spine is to develop the students’ cognitive and employability skills that will allow them to stand out from the crowd of other engineering graduates.The spine was developed and delivered for the first time in the academic year 2010-2011 for first-year general engineering students. In the year 2011-2012, those students joined different programs, and accordingly the second-year course was tailored to align with the different programs’ learning outcomes. This paper discusses the development and implementation of the course in the Electrical and Computer Engineering (ECE) department.

First-Year Engineering Computing Courses in Canadian Engineering Programs

1969 ◽  
Author(s):  
Sean Maw ◽  
Janice Miller Young ◽  
Alexis Morris
Keyword(s):  
Problem Solving ◽  
Engineering Students ◽  
Expected Value ◽  
Knowledge Development ◽  
First Year ◽  
Recent Past ◽  
Engineering Programs ◽  
Digital Computation ◽  
Pedagogical Philosophies ◽  
Introductory Computing

Most Canadian engineering students take a computing course in their first year that introduces them to digital computation. The Canadian Engineering Accreditation Board does not specify the language(s) that can or should be used for instruction. As a result, a variety of languages are used across Canada. This study examines which languages are used in degree-granting institutions, currently and in the recent past. It also examines why institutions have chosen the languages that they currently use. In addition to the language used in instruction, the types and hours of instruction are also analyzed. Methods of instruction and evaluation are compared, as well as the pedagogical philosophies of the different programs with respect to introductory computing. Finally, a comparison of the expected value of this course to graduates is also presented. We found a more diverse landscape for introductory computing courses than anticipated, in most respects. The guiding ethos at most institutions is skill and knowledge development, especially around problem solving in an engineering context. The methods to achieve this are quite varied, and so are the languages employed in such courses. Most programs currently use C/C++, Matlab, VB and/or Python.

Sign in / Sign up

Export Citation Format

Share Document