Development Of Small-scale Stirling Engine Heat Pump System

Author(s):  
T. Suganami ◽  
M. Mori ◽  
M. Fujiwara ◽  
I. Tsushi
1992 ◽  
Author(s):  
Michio Fujiwara ◽  
Teruo Sugimoto ◽  
Mikio Mori ◽  
Ken-ichi Shinozaki

Author(s):  
T. Nomaguchi ◽  
T. Suganami ◽  
M. Fujiwara ◽  
M. Sakai ◽  
T. Koda ◽  
...  

Author(s):  
Tomáš Stejskal ◽  
Jozef Svetlík ◽  
Peter Demeč ◽  
Miroslav Dovica ◽  
Miroslav Štofa ◽  
...  

Three-temperature heating systems consist of a heat engine and a heat pump, enabling thus maximum usage of the primary thermal source for the heating of buildings. This analysis has revealed obvious advantages and disadvantages that the combining of thermodynamic systems has in future development, also with respect to environmental and economic issues. It appears that the combination of a Stirling engine or a similar heat drive with a heat pump is especially suitable. In order to analyze the effectiveness of such a system, a comprehensive calculation procedure is used: its basis lies in accounting for all types of energy and their relationship to the original natural resource. The present paper aims to point out that the combination of Stirling engine and a heat pump is a useful solution thanks to the most favorable resultant economic impact if compared to the usage of a diesel, four-stroke gas, or, most commonly used, electric drive.


Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4527
Author(s):  
Hao Liu ◽  
Hongyi Zhang ◽  
Saqib Javed

Recent data suggest that heat pumps, despite having the potential to cover over 90% of the global space and water heating demands, only provide less than 5% of global heating. Heat pumps, in general, and ground source heat pumps, specifically, offer significant potential for energy savings and carbon emissions reduction in buildings. The realization of these potential benefits, however, requires proper design, installation, and operation of the entire heat pump system. This paper presents the performance analysis of a Swedish ground source heat pump system providing space heating and hot water to a sports clubhouse. The installation has been carefully instrumented to enable full characterization of the whole system including auxiliary components such as circulation pumps and supplementary heating. Seasonal performance factors, calculated for monthly and annual periods using high-quality, high-resolution measurement data collected over three years of system operation, have been reported based on the SEPEMO (SEasonal PErformance factor and MOnitoring for heat pump systems) and Annex 52 boundary schemes for evaluating and benchmarking the performance of the ground source heat pump system. The auxiliary system components were shown to have a large impact on the overall performance of the system. In particular, the legionella protection system was found to affect performance considerably. Recommendations as to how to improve the performance of the system under study and other similar systems are made from the design, installation, and operation perspectives.


2014 ◽  
Vol 705 ◽  
pp. 263-267
Author(s):  
Sandro Nizetic ◽  
Roko Gizdic ◽  
Ankit Yadav ◽  
Miro Bugarin

In this paper, a design of a specific hybrid energy system is elaborated for small scale applications in building facilities of residential or commercial purpose. The energy system is assembled from existing market available technologies that include implementation of a heat pump technology, photovoltaic system and of a standard accumulation boiler for the preparation of hot water. The developed energy system is assumed to be used in mild climates where a heat pump system can be efficiently used throughout the year. According to the gained experimental results the coefficient of the performance for the cooling mode can be expected between 5.0 and 6.0, which prove that the proposed system is highly energy efficient. The developed energy system can cover both cooling and heating demands and also demands for domestic hot water and it represents a totally renewable energy system.


HortScience ◽  
1994 ◽  
Vol 29 (4) ◽  
pp. 249a-249
Author(s):  
Eric A. Lavoie ◽  
Damien de Halleux ◽  
André Gosselin ◽  
Jean-Claude Dufour

The main objective of this research was to produce a simulated model that permitted the evaluation of operating costs of commercial greenhouse tomato growers with respect to heating methods (hot air, hot water, radiant and heat pumps) and the use of artificial lighting for 1991 and 1992. This research showed that the main factors that negatively influence profitability were energy consumption during cold periods and the price of tomatoes during the summer season. The conventional hot water system consumed less energy than the heat pump system and produced marketable fruit yields similar to those from the heat pump system. The hot water system was generally more profitable in regards to energy consumption and productivity. Moreover, investment costs were less; therefore, this system gives best overall financial savings. As for radiant and hot air systems, their overall financial status falls between that of the hot water system and the heat pump. The radiant system proved to be more energy efficient that the hot air system, but the latter produced a higher marketable fruit yield over the 2-year study.


Sign in / Sign up

Export Citation Format

Share Document