Comparison of Switching Patterns of SVM for a Novel High Gain Indirect Matrix Converter

Author(s):  
M. Israyelu ◽  
S. Sashidhar
Author(s):  
M. Raghuram ◽  
Avneet K. Chauhan ◽  
Santosh Kumar Singh

2012 ◽  
Vol 2012 ◽  
pp. 1-8
Author(s):  
Amin Shabanpour ◽  
Sasan Gholami ◽  
Ali Reza Seifi

This paper presents a MATLAB/Simulink simulation of direct and indirect space vector modulation for matrix converter. Different switching patterns for both direct and indirect methods are simulated and compared. Three criteria are chosen to compare the performance of switching patterns: (1) total harmonic distortion (THD); (2) harmonic spectrum analysis of output voltages; and (3) number of switching in each switching period. Switching strategies are completely implemented using the power library in MATLAB/Simulink environment.


Electronics ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 558 ◽  
Author(s):  
Mieczysław Chodunaj ◽  
Paweł Szcześniak ◽  
Jacek Kaniewski

The study of Current Source Matrix Converter (CSMC) static properties using the averaged state-space method for two modulation strategies Venturini and Space Vector Modulation (SVM) is the subject of this article. The converter properties for both modulation strategies have been examined and compared. The modeling approach based on the averaged state space method presented in this paper is relatively simple and requires only a small number of mathematical transformations. The averaged set equation is obtained directly from the three-phase schematic circuit, taking into account the sequences of switching patterns and modulation strategies. All the obtained results have confirmed that CSMC has some interesting properties, such as buck–boost output voltage regulation unlike the classic Matrix Converter (MC), in which the maximum voltage gain is 0.866.


Author(s):  
James F. Mancuso ◽  
Leo A. Fama ◽  
William B. Maxwell ◽  
Jerry L. Lehman ◽  
Hasso Weiland ◽  
...  

Micro-diffraction based crystallography is essential to the design and development of many classes of ‘crafted materials’. Although the scanning electron microscope can provide crystallographic information with high spatial resolution, its current utility is severely limited by the low sensitivity of existing diffraction techniques (ref: Dingley). Previously, Joy showed that energy filtering increased contrast and pattern visibility in electron channelling. This present paper discribes the effect of energy filtering on EBSP sensitivity and backscattered SEM imaging.The EBSP detector consisted of an electron energy filter, a microchannel plate detector, a phosphor screen, optical coupler, and a slow scan CCD camera. The electrostatic energy filter used in this experiment was constructed as a cone with 5 coaxial electrodes. The angular field-of-view of the filter was approximately 38°. The microchannel plate, which was the initial sensing component, had high gain and had 50% to 80% detection efficiency for the low energy electrons that passed through the retarding field filter.


Sign in / Sign up

Export Citation Format

Share Document