1996 ◽  
Vol 19 (3) ◽  
pp. 189-196 ◽  
Author(s):  
W.W. Choi ◽  
H.C. Kim ◽  
B.G. Min

A new automatic cardiac output control algorithm for an implantable electromechanical total artificial heart (TAH) was developed based on the analysis of motor current waveform without using any transducer. The basic control requirements of an artificial heart can be described in terms of three features: preload sensitivity, afterload insensivity, and balanced ventricular output. In previous studies, transducers were used to acquire information on the hemodynamic states for automatic cardiac output control. However, such a control system has reliability problems with the sensors. We proposed a novel sensorless automatic cardiac output control algorithm (ACOCA) providing adequate cardiac output to the time-varying physiological demand without causing right atrial collapse, which is one of the critical problems in an active filling device. In vitro tests were performed on a mock circulatory system to assess the performance of the developed algorithm and the results show that the new algorithm satisfied the basic control requirements of the cardiac output response.


1991 ◽  
Vol 14 (11) ◽  
pp. 707-715 ◽  
Author(s):  
E. Koppert ◽  
G.M. Pantalos ◽  
R. Tieleman ◽  
P. Swier ◽  
G.L. Burns

Two equally important issues need to be addressed during the early stages of the design of an implantable total artificial heart (TAH): proper anatomical fit and cardiac output capacity. As part of a first-time feasibility study to develop a neonate-size TAH, two studies were conducted to establish useful anatomical and physiological standards. The first (Study A) was conducted to determine the maximum dimensions of a neonate-size TAH. Twelve preserved hearts from full-term neonates with the hypoplastic left heart syndrome were examined. A second study (Study B) was designed to determine the acceptable minimum stroke volume compatible with minimum neonate cardiac output requirements. This study was based on a combination of: a) reported cardiac output studies in healthy term neonates, and term neonates with heart failure, b) body weight range, and c) limiting factors of TAH technology, e.g., valvular regurgitation and leveling off of the maximum cardiac output value at a specific heart rate and filling pressure. The proposed neonatal standards for TAH technology are presented.


1998 ◽  
Vol 84 (3) ◽  
pp. 868-876 ◽  
Author(s):  
Y. Abe ◽  
T. Chinzei ◽  
K. Mabuchi ◽  
A. J. Snyder ◽  
T. Isoyama ◽  
...  

To obtain a physiological response by a total artificial heart (TAH), while eliminating the hemodynamic abnormalities commonly observed with its use, we proposed the use of a conductance- and arterial pressure-based method (1/R control) to determine TAH cardiac output. In this study, we endeavored to make use of a variable more closely tied to central nervous system (CNS) efferents, systemic conductance, to provide the CNS with more direct control over the output of the TAH. The control equation that calculates the target cardiac output of the TAH was constructed on the basis of measurement of blood pressures and TAH flow. The 1/R control method was tested in TAH-recipient goats with an automatic method by using a microcomputer. In 1/R control animals, the typical TAH pathologies, such as mild arterial hypertension and substantial systemic venous hypertension, did not occur. Cardiac output varied according to daily activity level and exercise in a manner similar to that observed in natural heart goats. These results indicate that we have determined a control method for the TAH that avoids hemodynamic abnormalities exhibited by other TAH control systems and that exhibits physiological responses to exercise and daily activities under the conditions tested. The stability of the control and the complete lack of inappropriate excursions in cardiac output is suggestive of CNS involvement in stabilizing the system.


2009 ◽  
Vol 57 (01) ◽  
pp. 52-53 ◽  
Author(s):  
J. Sindermann ◽  
A. Hoffmeier ◽  
T. Tjan ◽  
H. Scheld

ASAIO Journal ◽  
1999 ◽  
Vol 45 (2) ◽  
pp. 146
Author(s):  
C H Hsu ◽  
J Wei ◽  
C S Tung ◽  
T M Kao ◽  
Kevin K.T. Cheng

Sign in / Sign up

Export Citation Format

Share Document