Our project mainly focuses work a lot being carried out in the field of distributed generation. For the electric grid, so Many distributed generation systems are being made. At this time when the non-renewable sources of energy such as oil, coal, etc are very fast disappearing, a study of distributed generation systems (DGs) and Establishing of such systems using renewable sources of energy becomes very important. we have seen several major problems will happen, when harmonic content of the current is flows into the grid, like this issue several issues are going to meet. When a Distribution Generation source is being linked to the grid. “The current being injected should have harmonic content conforming to standards such as IEEE 512-1992”[1].To limit the harmonic current injected into the grid. The hardware is tailor-made to be used for a solar PV panels based distributed generation system. This project deals mainly with Establishing the hardware for a grid connected inverter. This means that a proper plan of action should be present in the required system, special type of filters are made to abolish higher order harmonics, this is only the reason why filters would be less bulky and cheap. only the higher order harmonics are decreased by specially made filters, Lower order harmonics are attenuated by a technique called “an adaptive harmonic elimination technique (AHE). In our project we need to develop several blocks called the inverter hardware, design and implementation of closed loop control, transformer, the filters along with adaptive selective harmonic elimination scheme
Design and Implementation of Grid Connected Solar Inverter using Adaptive Harmonic Elimination Technique
