High electric field sensing in ultrathin SiO2 and tunnel region to enhance GaInP/Si dual junction solar cell performance

2021 ◽  
pp. 1-1
Author(s):  
Manish Verma ◽  
Guru Prasad Mishra
2019 ◽  
Vol 44 (7) ◽  
pp. 6651-6657
Author(s):  
Adama Ouedraogo ◽  
Thierry Sikoudouin Maurice Ky ◽  
Abdoulaye Compaore ◽  
Dieudonné Joseph Bathiebo

2011 ◽  
Vol 95 (11) ◽  
pp. 3009-3014 ◽  
Author(s):  
Nguyen Tam Nguyen Truong ◽  
Woo Kyoung Kim ◽  
Umme Farva ◽  
Xiang Dong Luo ◽  
Chinho Park

2015 ◽  
Vol 17 (1) ◽  
pp. 387-397 ◽  
Author(s):  
Weihua Zhou ◽  
Jiangman Shi ◽  
Lingjian Lv ◽  
Lie Chen ◽  
Yiwang Chen

The morphology of the P3HT–PCBM bulk heterojunction could be tuned by the liquid crystalline molecules under electric field assisted treatment for enhanced solar cell performance.


2015 ◽  
Vol 33 (2) ◽  
pp. 678-682 ◽  
Author(s):  
Viet Hau Thanh Pham ◽  
Nguyen Tam Nguyen Truong ◽  
Thanh Kieu Trinh ◽  
Sang Hoon Lee ◽  
Chinho Park

2008 ◽  
Vol 1066 ◽  
Author(s):  
Baojie Yan ◽  
Guozhen Yue ◽  
Yanfa Yan ◽  
Chun-Sheng Jiang ◽  
Charles W. Teplin ◽  
...  

ABSTRACTWe present a systematic study on the correlation of hydrogen dilution profiles to structural properties materials and solar cell performance in nc-Si:H solar cells. We deposited nc-Si:H single-junction solar cells using a modified very high frequency (VHF) glow discharge technique on stainless steel substrates with various profiles of hydrogen dilution in the gas mixture during deposition. The material properties were characterized using Raman spectroscopy, X-TEM, AFM, and C-AFM. The solar cell performance correlates well with the material structures. Three major conclusions are made based on the characterization results. First, the optimized nc-Si:H material does not show an incubation layer, indicating that the seeding layer is well optimized and works as per design. Second, the nanocrystalline evolution is well controlled by hydrogen dilution profiling in which the hydrogen dilution ratio is dynamically reduced during the intrinsic layer deposition. Third, the best nc-Si:H single-junction solar cell was made using a proper hydrogen dilution profile, which caused a nanocrystalline distribution close to uniform throughout the thickness, but with a slightly inverse nanocrystalline evolution. We have used the optimized hydrogen dilution profiling and improved the nc-Si:H solar cell performance significantly. As a result, we have achieved an initial active-area cell efficiency of 9.2% with a nc-Si:H single-junction structure, and 15.4% with an a-Si:H/a-SiGe:H/nc-Si:H triple-junction solar cell structure.


Sign in / Sign up

Export Citation Format

Share Document