NUFFT-Based Near-Field Imaging Technique for Far-Field Radar Cross Section Calculation

2010 ◽  
Vol 9 ◽  
pp. 550-553 ◽  
Author(s):  
Shiyong Li ◽  
Bocheng Zhu ◽  
Houjun Sun
2016 ◽  
Vol 60 ◽  
pp. 36-42 ◽  
Author(s):  
Gang Bao ◽  
Peijun Li ◽  
Yuliang Wang

2021 ◽  
Author(s):  
Takuma Watanabe ◽  
Hiroyoshi Yamada

In this study, we propose a generalized algorithm for far-field radar cross-section determination from 3-D synthetic aperture imaging with arbitrary antenna scanning surfaces. This method belongs to the class of techniques called image-based near-field to far-field transformation. The previous image-based approaches were formulated based on a specific antenna scanning surface or trajectory such as a line, a plane, a circle, a cylinder, and a sphere--and the majority of them considered 2-D radar images to determine the azimuth radar cross-section. We generalize the conventional image-based technique to accommodate an arbitrary antenna scanning surface, and consider a 3-D radar image for radar cross-section prediction in both the azimuth and zenith directions. We demonstrate the proposed algorithm via numerical simulations and anechoic chamber measurements.


2021 ◽  
Author(s):  
Takuma Watanabe ◽  
Hiroyoshi Yamada

<div><div>*This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible.</div></div><div><br></div>In this study, we present an improved and unified approach for image-based radar cross-section (RCS) measurement by 2-D synthetic aperture radar (SAR) imaging with an arbitrary curved antenna scanning trajectory. Because RCS is a quantity defined in the far-field distance of an object under test, direct RCS measurement of an electrically large target is often infeasible owing to the spatial limitation of the measurement facility. The method proposed in this study belongs to the class of techniques referred to as the image-based near-field to far-field transformation (NFFFT) to convert the near-field data of scattering experiment into the far-field RCS. In a previous study, we have developed an NFFFT based on 3-D SAR imaging with an arbitrary antenna scanning surface. However, the previous approach is only applicable to the surface scanning which is impossible for a certain case such as measurement using airborne SAR or vehicle-borne SAR. Therefore, one requires an alternative method that can accommodate an arbitrary scanning curve, which is the subject of this study. We derive a generalized correction factor for image-based NFFFT which is designed to ensure the integral transformation in the image reconstruction process be self-consistent for electrically small scatterers. We provide a series of numerical simulations, an indoor experiment, and an airborne SAR experiment to validate that the proposed scheme can be utilized for various situations ranging from near-field to far-field distance.


Author(s):  
E. Betzig ◽  
M. Isaacson ◽  
A. Lewis ◽  
K. Lin

The spatial resolution of most of the imaging or microcharacterization methods presently in use are fundamentally limited by the wavelength of the exciting or the emitted radiation being used. In general, the smaller the wavelength of the exciting probe, the greater the structural damage to the sample under study. Thus, the requirements of minimal sample alteration and high spatial resolution seem to be at odds with one another.However, the reason for this wavelength resolution limit is due to the far field methods for producing or detecting the radiation of interest. If one does not use far field optics, but rather the method of near field imaging, the spatial resolution attainable can be much smaller than the wavelength of the radiation used. This method of near field imaging has a general applicability for all wave probes.


Sign in / Sign up

Export Citation Format

Share Document