Thermal Impedance Modeling of Si–Ge HBTs From Low-Frequency Small-Signal Measurements

2011 ◽  
Vol 32 (2) ◽  
pp. 119-121 ◽  
Author(s):  
Amit Kumar Sahoo ◽  
Sébastien Fregonese ◽  
Thomas Zimmer ◽  
Nathalie Malbert
Author(s):  
SAMUNDRA GURUNG ◽  
SUMATE NAETILADDANON ◽  
ANAWACH SANGSWANG

Currently, large-scale solar farms are being rapidly integrated in electrical grids all over the world. However, the photovoltaic (PV) output power is highly intermittent in nature and can also be correlated with other solar farms located at different places. Moreover, the increasing PV penetration also results in large solar forecast error and its impact on power system stability should be estimated. The effects of these quantities on small-signal stability are difficult to quantify using deterministic techniques but can be conveniently estimated using probabilistic methods. For this purpose, the authors have developed a method of probabilistic analysis based on combined cumulant and Gram– Charlier expansion technique. The output from the proposed method provides the probability density function and cumulative density function of the real part of the critical eigenvalue, from which information concerning the stability of low-frequency oscillatory dynamics can be inferred. The proposed method gives accurate results in less computation time compared to conventional techniques. The test system is a large modified IEEE 16-machine, 68-bus system, which is a benchmark system to study low-frequency oscillatory dynamics in power systems. The results show that the PV power fluctuation has the potential to cause oscillatory instability. Furthermore, the system is more prone to small-signal instability when the PV farms are correlated as well as when large PV forecast error exists.


1995 ◽  
Vol 05 (04) ◽  
pp. 747-755 ◽  
Author(s):  
MARIAN K. KAZIMIERCZUK ◽  
ROBERT C. CRAVENS, II

An experimental verification of previously derived small-signal low-frequency open- and closed-loop characteristics and step responses of a voltage-mode-controlled pulse-width-modulated (PWM) boost DC–DC converter is presented. The Bode plots of the voltage transfer function of the control circuit, the converter and the PWM modulator, the open-loop control-to-output and input-to-output transfer functions, the loop gain, and the closed-loop control-to-output and input-to-output transfer functions are measured. The step responses to the changes in the input voltage, the duty cycle, and the reference voltage are measured. The theoretical results were in good agreement with the measured results. The small-signal model of the converter is experimentally verified.


2019 ◽  
Vol 89 (2) ◽  
pp. 206
Author(s):  
А.Е. Панич ◽  
Г.С. Радченко ◽  
А.В. Скрылев ◽  
А.А. Панич ◽  
А.Ю. Малыхин

AbstractOptimal geometrical and electrophysical parameters are calculated theoretically; the effective response of a solid-state hybrid “magnet–carbon—piezoelectric” sensor is studied experimentally. Experiments are performed under the action of an external magnetic field of low-frequency flexural resonances (from 1 to 230 Hz). Theoretical calculations have formed the basis for designing an experimental prototype of the instrument. The frequency dependence of the direct piezoelectric response to the applied small-signal varying magnetic action is constructed.


Sign in / Sign up

Export Citation Format

Share Document