Current Research, Application and Development of Wall-Climbing Robots

Author(s):  
Luo Jie
2013 ◽  
Author(s):  
Jennifer A. Veitch ◽  
Ivaldo Pasini ◽  
Guy R. Newsham ◽  
Karen Pero ◽  
Stephen Pope

Author(s):  
Jesus Garcia-Arca ◽  
Jose A. Comesaña-Benavides ◽  
A. Trinidad Gonzalez-Portela Garrido ◽  
J. Carlos Prado-Prado

Robotics ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 96
Author(s):  
Yankai Wang ◽  
Qiaoling Du ◽  
Tianhe Zhang ◽  
Chengze Xue

Hybrid mobile robots with two motion modes of a wheeled vehicle and truss structure with the ability to climb poles have significant flexibility. The motion planning of this kind of robot on a pole has been widely studied, but few studies have focused on the transition of the robot from the ground to the pole. In this study, a locomotion strategy of wheeled-legged pole-climbing robots (the WL_PCR) is proposed to solve the problem of ground-to-pole transition. By analyzing the force of static and dynamic process in the ground-to-pole transition, the condition of torque provided by the gripper and moving joint is proposed. The mathematical expression of Centre of Mass (CoM) of the wheeled-legged pole-climbing robots is utilized, and the conditions for the robot to smoothly transition from the ground to the vertical pole are proposed. Finally, the feasibility of this method is proved by the simulation and experimentation of a locomotion strategy on wheeled-legged pole-climbing robots.


10.5772/7228 ◽  
2009 ◽  
Vol 6 (3) ◽  
pp. 29 ◽  
Author(s):  
Hu Bing-Shan ◽  
Wang Li-Wen ◽  
Fu Zhuang ◽  
Zhao Yan-zheng

Wall climbing robots using negative pressure suction always employ air pumps which have great noise and large volume. Two prototypes of bio-inspired miniature suction cup actuated by shape memory alloy (SMA) are designed based on studying characteristics of biologic suction apparatuses, and the suction cups in this paper can be used as adhesion mechanisms for miniature wall climbing robots without air pumps. The first prototype with a two-way shape memory effect (TWSME) extension TiNi spring imitates the piston structure of the stalked sucker; the second one actuated by a one way SMA actuator with a bias has a basic structure of stiff margin, guiding element, leader and elastic element. Analytical model of the second prototype is founded considering the constitutive model of the SMA actuator, the deflection of the thin elastic plate under compound load and the thermo-dynamic model of the sealed air cavity. Experiments are done to test their suction characteristics, and the analytical model of the second prototype is simulated on Matlab/simulink platform and validated by experiments.


1982 ◽  
Vol 9 (1) ◽  
pp. 1-33 ◽  
Author(s):  
Ervin H. Zube ◽  
James L. Sell ◽  
Jonathan G. Taylor

Sign in / Sign up

Export Citation Format

Share Document