Real time simulation of a power system including renewable energy sources

Author(s):  
Rafael Pena ◽  
Aurelio Medina
2018 ◽  
Vol 55 (2) ◽  
pp. 3-10
Author(s):  
A. Obushevs ◽  
A. Mutule

Abstract The paper focuses on the application of synchrophasor measurements that present unprecedented benefits compared to SCADA systems in order to facilitate the successful transformation of the Nordic-Baltic-and-European electric power system to operate with large amounts of renewable energy sources and improve situational awareness of the power system. The article describes new functionalities of visualisation tools to estimate a grid inertia level in real time with monitoring results between Nordic and Baltic power systems.


Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2815
Author(s):  
Zongjie Wang ◽  
C. Lindsay Anderson

Renewable energy sources including wind farms and solar sites, have been rapidly integrated within power systems for economic and environmental reasons. Unfortunately, many renewable energy sources suffer from variability and uncertainty, which may jeopardize security and stability of the power system. To face this challenge, it is necessary to develop new methods to manage increasing supply-side uncertainty within operational strategies. In modern power system operations, the optimal power flow (OPF) is essential to all stages of the system operational horizon; underlying both day-ahead scheduling and real-time dispatch decisions. The dispatch levels determined are then implemented for the duration of the dispatch interval, with the expectation that frequency response and balancing reserves are sufficient to manage intra-interval deviations. To achieve more accurate generation schedules and better reliability with increasing renewable resources, the OPF must be solved faster and with better accuracy within continuous time intervals, in both day-ahead scheduling and real-time dispatch. To this end, we formulate a multi-period dispatch framework, that is, progressive period optimal power flow (PPOPF), which builds on an interval optimal power flow (IOPF), which leverages median and endpoints on the interval to develop coherent coordinations between day-ahead and real-time period optimal power flow (POPF). Simulation case studies on a practical PEGASE 13,659-bus transmission system in Europe have demonstrated implementation of the proposed PPOPF within multi-stage power system operations, resulting in zero dispatch error and violation compared with traditional OPF.


Author(s):  
О. П. Кравченко ◽  
Е. Г. Манойлов ◽  
Г. О. Бабич ◽  
Я. С. Малий

Development of electronic monitoring and control system for achieving an effective ratio between electrical energy generation and consumption in the local object power supply system. Methodology. The theory of electrical circuits and electronic circuits were used. Obtaned  results.  The  electronic  system  for  monitoring  and  controlling  power  supply  in  the  local object  power  system  was  developed.  The  system  comprises  three  modules:  central  processor,  module  for monitoring  environment  parameters  and executive module  which  consists  of measuring (current,  voltage) and relay blocks. The central processor processes signals from monitoring and measuring blocks and forms executive  commands  on  relay  block  in  order  to  switch  on/off  consumer  loads  and  electric  generators. Developed systems alowes both maximal power take-off from distributed (renewable) energy sources and flexible  implementation  of  power  consumption  regulation  for  achieving  an  effective  ratio  between  the generation of electrical energy provided by renewable energy sources and the general distribution network, and the total load device consumption in the local object power system. Orginality. The electronic monitoring and controlling system in the local object power system alows providing generated and consumed loads monitoring in the real time. The system provides an ability to form real time  energy  profiles based    on  which  the  control  algorithm  for  executive  block  control is  formed in order to achieve an effective ratio between generation and consumption of electricity in the power system of the local facility.for in   power consumption control system has been developed, which consists of a central processor, monitoring and executive units. The monitoring unit allows you to create energy profiles in real time,  on  the  basis  of  which  the  control  algorithm  in  the  executive  unit  is  formed  in  order  to  achieve  an effective ratio between the electricity  generation and consumption in the local object power system. Practical  value.  As  a  result  of  the  presented  work,  an  electronic  system  for  monitoring  and controling electricity supply in the local object power system with the defined formation of distributed energy sources generation and required consumption profiles in the real time was developed to provide efficient energy  consumption  according  to  the  concepts  of  distributed  electrical  networks  with  renewable  energy sources and Smart House.


Sign in / Sign up

Export Citation Format

Share Document